Instruction d'utilisation Aiphone DE-UR

Résumé du contenu de la page N° 1

83435300 05950 AlPHONE
TD Series
DOOR STATION ADAPTOR
INSTALLATION & OPERATION MANUAL
SYSTEM OUTLINE & COMPONENTS
DE-UR is an adaptor that can add a door station, audio or PanTilt video to TD Phone Selective Call Intercom.
5(+,-,D and two C)
IF-DA
to TD-H(or TD-Z) stations
Package contents
@-
A position, preset
Packet of screws
Installation & Operation Manual
*TD-H or TD-Z system is
Set to B position
IF-DA
powered by a PS-12A (PS-
12C), which should be located
in the middle po

Résumé du contenu de la page N° 2

PRECAUTIONS ON INSTALLATION & WIRING A CAUTION * Do not connect any terminal on any unit to AC power lines. * Unplug all power supplies while making wiring connections on any audio and video equipment. * DE-UR is an adaptor for indoor installation only. Follow precautions as stated in the Manuals packed with TD-H and MY-CU monitor. * Locate DE-UR unit(s) closely to power supply PS-12A (PS-12C) of TD-H or TD-Z system, so as to be fed DC12V from it. * Wiring to EL-9S door release must run

Résumé du contenu de la page N° 3

Wiring 1. One audio IE/IF Series 2. Two audio IE/IF Series DE-UR DE-UR DE-UR IF-DA IF-DA 1 2 IF-DA 'I no no 7 4 wires to PS-12A PS-12A ' to TD-H(TD-2) 5 wires to (PS-12C) (PS-12C) to TD-H(TD-2) (max. 12) 3. One PanTilt MY Series (plus one audio) 4. Two PanTilt MY Series MY-CU MY-DC to PanTilt 1 to PanTilt 2 27 DE-UR DE-UR TO MY-Ck (camera -0 IF-0 1- (door 1) Rp T (door2) :E I I PS-18D DE-UR PS-12A DE-UR TD-H (max. 12) 4 I to TD- (for MY-DC) (IF-DA) -3-

Résumé du contenu de la page N° 4

MOUNTING DE-UR chassis, after separated, mounts with 83.5mm, 341 6" guide. Pronas 1. Opening the cover, loosen the bottom screw. 3 2. Lift front case off the prongs of chassis, and 83.5mm disconnect DE-UR. (3-5/16") 3. Mount the chassis to wall or board at 2 points. -~ _L 4. Make wire terminations for each door station, TD-H station, and PS-l2A(12C) power supply. -Chassis 5. Reconnect and mount DE-UR front case to chassis. S P E C I F I CAT1 0 N S * Power source: DC 12V, supplie