Résumé du contenu de la page N° 1
READ & SAVE THESE INSTRUCTIONS!
INSTALLATION INSTRUCTIONS
Video Door Answering System
Model VSUC4SK
INSTALLATION INSTRUCTIONS
This booklet contains information for installing the TV/Monitor. For more detailed information on wiring and mounting other
All system wiring and rough-in frames should be installed system components (i.e., optional camera, rough-in.), refer
before mounting and wiring the master station. Refer to the to the installation instructions packaged with the separate
installa
Résumé du contenu de la page N° 2
Caution RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SER- VICE PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOIS- TURE. THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACE ON THE APPARATUS EXPLANATION OF GRAPHICAL SYMBOLS The lightn
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS 1. READ THESE INSTRUCTIONS — All the safety and outlet. Do not defeat the safety purpose of the polarized operating instructions should be read before the product plug. is operated. 12. POWER-CORD PROTECTION — Power-supply cords 2. RETAIN INSTRUCTIONS — The safety and operating should be routed so that they are not likely to be walked instructions should be retained for future reference. on or pinched by items placed upon or against them pay- ing particular attenti
Résumé du contenu de la page N° 4
the operation instructions. Adjust only those controls 21. SAFETY CHECK — Upon completion of any service or that are covered by the operating instruction, as an repairs to this product, ask the service technician to per- improper adjustment of other controls may result in form safety checks to determine that the product is in damage and will often require extensive work by a proper operating condition. qualified technician to restore the product to its normal 22. WALL OR CEILING MOUNTING — The p
Résumé du contenu de la page N° 5
Table of Contents VSUC4SK REPRESENTATIVE WIRING ILLUSTRATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Contents of carton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Precautions and Guidelines . . . . . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 6
VSUC4SK SERIES REPRESENTATIVE WIRING ILLUSTRATION ® AM loop Antenna with 34" lead INSTALLATION ® FM Antenna with 20 foot lead CONTENTS OF CARTON ® FM Antenna with 5 foot lead Check (_) for following VSUC4SK carton contents: ® FM Antenna Balun ® TV right angle coax extension ® VSUC4SK TV/Monitor ® Telephone cable ® VSUC4SK Hardware bag assembly containing: ® IR Remote Control with battery (4) #8 x 1 1/2" screws ® Mounting Hole Template (4) #8 x 1 1/4" screws ® Homeowner’s manual (4) #8 x 7/8" scr
Résumé du contenu de la page N° 7
Note to Installer: Do not discard these installation instructions. Please give all installation instructions, warranty registration and homeowner’s manual to homeowner. PRECAUTIONS AND GUIDELINES The NuTone VSUC4SK has been designed for ease of installation. Please read and follow ALL installation instructions, guidelines and precautions. Any deviation from these instructions or miswiring combinations will cause the unit to fail and all NuTone warranties will be void. WARNING: 120 Volt AC power
Résumé du contenu de la page N° 8
Under the Cabinet Mounting Fasten the plastic frame of the loop antenna using screws, nails, or staples (not supplied) in an open space under the cabinet. Attach the two wire lead-in cable from the loop antenna to the AM-ANT terminals on the back of the TV/Monitor. Above the Cabinet Mounting Fasten the plastic frame of the loop antenna using screws, nails, or staples (not supplied) in an open space above the cabinet. Run the two wire lead-in cable behind the cabinet to the TV/Monitor location.
Résumé du contenu de la page N° 9
FM Folded Dipole Antenna with 20 foot lead-in The folded dipole antenna with a 20' lead is designed to be mounted in the homes attic. If additional lead-in length is needed, additional 300 ohm “twin lead” cable can be attached. Use one of the following methods to install the FM antenna. Stapling Use staples to attach twin lead wire to rafters, or joists. Insert the staple lengthwise in the plastic between the wires. Do not staple across the wire. Staple Antenna Through Center Nailing Nails may
Résumé du contenu de la page N° 10
Ceiling Joist When attic space is limited, staple antenna to ceiling joists. Nail or Staple Through Center Twin-Lead Connection 1. Run the 20 foot twin lead to the location where the TV/Monitor will be mounted. 2. Keep twin lead at least 12" away from metal and other wiring. 3. Provide 12" extra of antenna lead at the TV/Monitor location. 4. Attach the lead-in cable terminals of the antenna to the screw terminals of the FM antenna balun (supplied). Plug the FM antenna balun into the FM-ANT conne
Résumé du contenu de la page N° 11
Above the Cabinet Mounting Fasten the FM antenna using staples (not supplied) in an open space above the cabinet. Run antenna behind the cabinet to the TV/Monitor location. If access behind the cabinet is not possible, drill a hole in the top and bottom of the cabinet and “fish” Antenna through the cabinet to the TV/Monitor location. Plug the FM antenna “F” connector into the FM-ANT connector on the back of the TV/Monitor. Important: The staples used to mount the FM antenna must not have enough
Résumé du contenu de la page N° 12
Camera Wiring An individual category 5 or category 6 cable must be connected from the camera to the TV/Monitor. • Maximum cable length: 250 feet. • Cable type: Category 5 or category 6 IMPORTANT: NuTone cannot be responsible for improper system operation that results from interference generated by light dimmers, fluorescent lighting fixtures, and similar electrical products. Such interference must be corrected at the source. TO HELP REDUCE THIS INTERFERENCE, ALL WIRING CONNECTED BETWEEN THE CA
Résumé du contenu de la page N° 13
5. Separate and strip approx 1/2" of insulation from each of the eight wires in the cable. Twist the following cables together: • OR and OR/WH • GR and GR/WH • BL and BL/WH • BR and BR/WH 6. Remove the plastic back frame and rubber gasket from the camera. Position the back frame and gasket over wire and attach to the wall box using (2) #6 x 3/4" machine screws (supplied). Level the back frame before tightening screws completely. 7. Attach each of the twisted pair of wires to the corresponding sc
Résumé du contenu de la page N° 14
5. Separate and strip approx 1/2" of insulation from each of the eight wires in the cable. Twist the following cables together: • OR and OR/WH • GR and GR/WH • BL and BL/WH • BR and BR/WH 6. Remove the plastic back frame and rubber gasket from the camera. Position the back frame and gasket over wire and attach to the wall using (2) #6 x 1 1/4" screws (supplied). Level the back frame before tightening screws completely. 7. Attach each of the twisted pair of wires to the corresponding screw termi
Résumé du contenu de la page N° 15
• OR and OR/WH • GR and GR/WH • BL and BL/WH • BR and BR/WH 3. Attach each of the twisted pair of wires to the corresponding Camera 2 screw terminals on the back of the TV/Monitor. Tighten each screw securely. Wiring and Mounting the TV/Monitor Locate the TV/Monitor unit where the camera, TV, AM, FM and Telephone cables were previously ran. Depending on the depth of the cabinet, decide if you need to make all the connections to the back of the TV/Monitor before fastening the TV/Monitor to the
Résumé du contenu de la page N° 16
• Position the round plastic spacer at each mounting hole location. To help hold the spacers in-place, position the small diameter end of the spacer towards the TV/Monitor case. Lift and hold the TV/Monitor in position. Select a 7/8", 1 1/4", or 1 1/2" mounting screw (supplied) based on your particular installation and insert the first mounting screw into one of the mounting holes in the TV/Monitor, and tighten. • Insert the remaining 3 mounting screws (supplied) and tighten. • Complete all
Résumé du contenu de la page N° 17
• Select a 1 1/2", or 2 1/4" mounting screw (supplied) based on your particular installation. Insert all four (4) mount- ing screws (supplied) from inside the cabinet. • Position the round plastic spacer at each mounting hole location. To help hold the spacers in-place, position the small diameter end of the spacer towards the TV/Monitor case. Lift, align the screws onto the spacers and hold the TV/Monitor in position. • Insert the first threaded mounting shaft (supplied) into the bottom of t
Résumé du contenu de la page N° 18
Powering Up the System Once all connections throughout the system have been checked, the power cable plug can be plugged into a 120 VAC duplex outlet. Refer to the homeowner’s manual for operating instructions. Camera Volume Adjustment The VSC4S door camera is provided with a volume level adjustment set screw. The adjustment has been pre-set at the factory to provide the optimal volume level at the door camera. The volume level can be adjusted if your specific application requires the level to
Résumé du contenu de la page N° 19
• Connect the equipment into an outlet on a circuit dif- FCC Information Part 15 Rules ferent from that to which the receiver is connected. This equipment has been tested and found to comply with the • Consult the dealer or an experienced radio/TV techni- limits for a Class B digital device, pursuant to Part 15 of the cian for help. FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- FCC Warning – This equipment may genera
Résumé du contenu de la page N° 20
Product specifications subject to change without notice. 4820 Red Bank Road, Cincinnati, Ohio 45227 Printed in Korea, 05/2006, Part No. 100909
