Instruction d'utilisation Walker Edison 52" Corner TV Stand W52CCRBL

Résumé du contenu de la page N° 1

Item #: W52CCR
Assembly Instructions
Revised 07/2012

Résumé du contenu de la page N° 2

General Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly. II. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. IV. The main types of hardware used to assemble this product are wood dowels, cam bolts and locks, bolts and screws. V. The provided glue is to secure wood dowels in place. When first inserting dowels, locate the appropriate h

Résumé du contenu de la page N° 3

Parts List

Résumé du contenu de la page N° 4

Hardware List

Résumé du contenu de la page N° 5

Insert dowels (A) into panels (2,5). Insert dowels (A) into panels (3,4) and slats (14). Screw cam bolts (B) into panels (3,4) and slats (14).

Résumé du contenu de la page N° 6

Screw cam bolts (B) into top panel (1). Screw cam bolts (B) into bottom panel (9).

Résumé du contenu de la page N° 7

Attach slat (14) to panel (3) using cam bolts and dowels as guides. Secure the two pieces together using cam locks (C). Tighten cam locks (C) with a screwdriver. Attach slat (14) to panel (4) using cam bolts and dowels as guides. Secure the two pieces together using cam locks (C). Tighten cam locks (C) with a screwdriver.

Résumé du contenu de la page N° 8

Attach panels (3,4) to panel (5) using cam bolts and dowels as guides. Secure panel (3) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Résumé du contenu de la page N° 9

Secure panel (4) to panel (5) using cam locks (C). Tighten cam locks (C) with a screwdriver. Attach the panel assembly from the previous step to bottom panel (9) using cam bolts and dowels as guides.

Résumé du contenu de la page N° 10

Secure panel (3) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver. Secure panel (4) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Résumé du contenu de la page N° 11

Carefully slide panels (2) into place using cam bolts and dowels as guides. Secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Résumé du contenu de la page N° 12

On opposite side of console, secure panels (2) to bottom panel (9) using cam locks (C). Tighten cam locks (C) with a screwdriver. Carefully slide back panels (10,11) into place along back side of console. Panels (10,11) will overlap slightly as shown in insert above.

Résumé du contenu de la page N° 13

Secure back panels (10,11) to the console using screws (J). Carefully fit top panel (1) into place using cam bolts and dowels as guides.

Résumé du contenu de la page N° 14

Secure top panel (1) to panels (2,3) using cam locks (C). Tighten cam locks (C) with a screwdriver. Secure top panel (1) to panels (2,4) using cam locks (C). Tighten cam locks (C) with a screwdriver.

Résumé du contenu de la page N° 15

1 2 2 On back side of console, secure top panel (1) to panels (2) using cam locks (C). Tighten cam locks (C) with a screwdriver. Cover all visible cam locks with stickers (K) as desired.

Résumé du contenu de la page N° 16

Attach hinges (G) to doors (12,13) using screws (H). Attach doors (12,13) to the console using screws (H) at hinges (G). See page 2 for specific instructions on how to adjust hinges so doors are aligned with console as desired. Attach handles (D) to doors (12,13) using bolts (E).

Résumé du contenu de la page N° 17

Insert shelf support pins (F) into console at desired shelf heights. Insert shelf support pins (F) into console at desired shelf heights.

Résumé du contenu de la page N° 18

Carefully place shelves (6,7,8) into console. Shelves (6,7,8) will rest on the shelf support pins.