Résumé du contenu de la page N° 1
Installation and Assembly: 32" - 50" Flat Panel TV Stand
Models: SS550P, SS550P-S
This product is UL Listed. It must be
installed by a qualified professional
installer.
Max Load Capacity:
150 lb (68 kg) screen
50 lb (22.7 kg) per shelf
3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com
ISSUED: 09-05-06 SHEET #: 202-9166-7 11-10-08
Résumé du contenu de la page N° 2
Note: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at 1-800-865-2112. • This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and f
Résumé du contenu de la page N° 3
A B Before you begin, make sure all parts shown are included with your product. Parts List SS550P SS550P-S Description Qty. Black Part # Silver Part# C H A screen mount bracket 1 201-P1156 201-4156 B hook plate 1 201-P1157 201-4157 C shelf support 2 201-P1158 201-4158 D shelf clamp bracket 2 201-P1159 201-4159 E base 1 201-P1633 201-4633 F universal plate 1 201-P1109 201-4109 G adapter bracket 2 201-P1513 200-4513 H upright 1 580-P1180 580-4180 I glass shelf 2 590-1208 590-1208 D J top cover 1
Résumé du contenu de la page N° 4
Phillips Adapter Bracket Fasteners M4 x 12 mm (6) M6 x 12 mm (4) M5 x 12 mm (4) 504-9013 520-1128 520-1027 M8 x 16 mm (6) M6 x 20 mm (4) M5 x 25 mm (4) 520-9257 520-9402 520-9543 M4 x 25 mm (4) M8 x 25 mm (4) M6 x 25 mm (4) 504-1015 520-1031 M6 x 30 mm (4) 520-1208 multi-washer (6) 510-9109 580-1036 M8 x 40 mm (4) 520-1136 I.D. .22" (5.6 mm) (4) I.D. .34" (8.7 mm) (4) 540-1057 540-1059 Cut adhesive felt (S) into four pieces as shown in figure 1.1 below and affix to bottom of base (E). 1 Attach u
Résumé du contenu de la page N° 5
Loosely attach four 1/4-20 x 12 mm screws (L), Slide shelf support (C) onto upright (H) so that 1/4-20 2 3 washers (O), and 1/4-20 nuts (N) to shelf nuts (N) slide into slots of upright (H) as shown in figure support (C). 3 and detail 1. Slide shelf support to desired position, level, then tighten 1/4-20 x 12 mm screws (L) using 4 mm allen wrench (R). NOTE: MAXIMUM OF TWO SHELVES 3-1 Max height of top shelf is 34" from base. Max height of second shelf is 28" from base. N L C O L N C SLOT H H DET
Résumé du contenu de la page N° 6
Loosely attach six 1/4-20 x 12 mm screws (L), Slide screen mount bracket (A) onto upright (H) so that 6 7 washers (O), and 1/4-20 nuts (N) to screen mount 1/4-20 nuts (N) slide into slots of upright (H) as shown bracket (A). in figure 7 and detail 2. Slide screen mount bracket to desired position, level, then tighten 1/4-20 x 12 mm screws (L) using 4 mm allen wrench (R). N A N L SLOT H H DETAIL 2 L A O fig. 7 Snap top cover (J) onto upright (H). Insert two 1/4-20 x 12 mm screws (L) into screen 8
Résumé du contenu de la page N° 7
Attaching Screen Using Universal Plate with Adapter Brackets For attaching screens with VESA 100 hole pattern, skip to page 10. Attach universal plate (F) to hook plate (B) using four Attach hook plate (B) to screen mount bracket (A). 10 11 M10 x 15 mm socket screws (T). Tighten screws using 6 mm allen wrench (U). B F B T A Insert two 1/4-20 x 12 mm screws (L) into holes indicated below for desired screen orientation. Tighten all screws 12 using 4 mm allen wrench (R). L L L No Tilt 2° Backward
Résumé du contenu de la page N° 8
Installing Adapter Brackets WARNING • Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque. • If screws don't get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly secured, damage may occur to screen or product may fail.
Résumé du contenu de la page N° 9
For Flat Back Screen Refer to Screen Compatibility Chart to determine the proper fastener to use. Visit www.peerlessmounts.com/2 13-1 for a full screen compatibility chart for this mount. Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into screen as shown below. Screw must make at least three full turns into the mounting hole and fit snug into place. Do not over tighten. If screw cannot make three full turns into the screen, select a longer length scre
Résumé du contenu de la page N° 10
Mounting and Removing Flat Panel Screen WARNING • Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television. Hook adapter brackets (G) onto universal plate (F), then slowly swing screen in as shown. Turn screws clockwise at 14 least six times to prevent screen from being removed as shown in detail 4. Note: Tighten using 4 mm allen wrench (R). Screen can be adjusted horizontally if desired. Note: It is important to lock screen down! To lock the scre
Résumé du contenu de la page N° 11
Attaching Screen with VESA 100 Mounting Pattern WARNING • If screws don't get three complete turns in the screen inserts or if screws bottom out and hook plate is still not tightly secured, damage may occur to screen or product may fail. Choose hole pattern as shown in figure 10. Attach Attach hook plate (B) to screen mount bracket (A). 10 11 hook plate (B) to back of screen using four M4 x 12 mm screws. Tighten screws using a phillips screw- driver. B fig 10 A B M4 X 12 MM SCREWS Insert two 1/