Instruction d'utilisation Chief Manufacturing PST 2000 Series

Résumé du contenu de la page N° 1

INSTALLATION INSTRUCTIONS
LARGE FLAT PANEL DISPLAY STATIC MOUNT
PST 2000 Series
The PST static wall mount accommodates large flat
screens weighing up to 200 lbs (90.72kg). The teardrop
holes in the mount allow for quick connect/disconnect of
the screen, thus simplifying installation and maintenance
processes.
The top and bottom mounting brackets are adaptable to
supporting framework with wood studs that are 16” on
center or 24”on center.
The mount has integrated lateral shift, allowing for fou

Résumé du contenu de la page N° 2

Installation Instructions PST 2000 Series IMPORTANT WARNINGS and CAUTIONS! WARNING A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions. CAUTION A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corresponding instructions. Improper installation can result in serious personal injury! Make sure that the mounting surface WARNING can support a redundant weight factor five times the total weight

Résumé du contenu de la page N° 3

Installation Instructions PST 2000 Series PARTS LIST CONTENTS Prior to assembly, unpack the carton completely. Verify DIMENSIONAL DRAWING ..................................... 2 contents listed in Table 1 and Figure 1. TOOLS REQUIRED FOR INSTALLATION.............. 3 Read installation instructions completely. If you are PARTS LIST .............................................................. 3 missing any of the listed parts, contact Customer Service PST INSTALLATION.............................

Résumé du contenu de la page N° 4

Installation Instructions PST 2000 Series PST INSTALLATION Hang the mount on Perform the following procedures to mount the PST. the wall temporarily Select Mounting Location using a nail in the center hole. Level the To select the mounting location, do the following: mount before drilling pilot holes. WARNING: It is the responsibility of the installer to verify that the wall to which the mount is anchored will safely support the combined load of all attached Figure 2. Use Triangular Hole to Hang

Résumé du contenu de la page N° 5

Installation Instructions PST 2000 Series PST INSTALLATION (Cont’d) Mount the PST To mount the PST, do the following: 1. Holding the PST against the wall, select the pair of Option A mounting holes that best suits your situation (see Figures 5, 6, and 7). NOTE: The mounting holes are slotted to allow for a small degree of lateral movement. The mount can be centered, or shifted to the left of center, or right of center depending on stud location. 2. Depending on your situation, install the lag bo

Résumé du contenu de la page N° 6

Installation Instructions PST 2000 Series ATTACH PSB TO THE DISPLAY To attach the PSB to the display, do the following: To help your identify the correct PSB that matches the model number of your display, refer to the cross-reference chart at www.chiefmfg.com. To download the corresponding PSB installation instructions, refer to www.chiefmfg.com. INSTALL THE DISPLAY To install the display, do the following: To install display, align NOTE: Verify that all power/audio/video cables are the mountin

Résumé du contenu de la page N° 7

Installation Instructions PST 2000 Series 7

Résumé du contenu de la page N° 8

Installation Instructions PST 2000 Series 8