Instruction d'utilisation Axor Citterio 39234XX1

Résumé du contenu de la page N° 1

Installation Instructions / Warranty
Citterio
39134XX1
39154XX1
Citterio
39234XX1

Résumé du contenu de la page N° 2

Axor Citterio Widespread Lav Mixer 39134XX1, 39154XX1 Axor Citterio Bidet Mixer 39234XX1 39134XX1 39154XX1 39234XX1 Technical Data Recommended hole size spout 1 3/8“ valves 1 1/4“ Maximum depth of mounting surface 1 1/8“ Flow rate @ 45 psi 2.2 gpm Maximum water pressure 145 psi Recommended water pressure: 14.5 - 75 psi o o Recommended hot water temp.: 120 F - 140 F* o *Some municipalities limit the maximum water temperature from the water heater to 120 or below. Please know and

Résumé du contenu de la page N° 3

• Install the valve bodies to the lavatory. • Install the spout to the handle assembly. Use a 5 mm allen wrench to install and tighten the spout retaining screws. • Place the spout and handle assembly over the valve bodies. Tighten the valve mounting screws. • Install the drain pull rod. Place the spout mounting piece and the nut over the threaded shank on the bottom of the spout assembly. Tighten the nut. 3

Résumé du contenu de la page N° 4

• Place a compression nut and ferrule over the spout tube. • Install the mounting angle. Tighten the compression nut by hand, then finish tightening with a wrench. • Screw the hot and cold connection hoses to the mounting angle. • Place a compression nut and washer over the shank end of one of the connection hoses. • Attach the hose to the outlet port on the valve with the compression fitting. Tighten with a wrench. Repeat with the other connection hose. • Connect the valves t

Résumé du contenu de la page N° 5

Install the pop-up drain Remove the plunger assembly. Unscrew the drain outlet flange from the tee. plunger Unscrew the tailpiece from the tee. Wrap the threads with plumbers’ thread tape and replace. height adjuster Install the white, flexible sealing gasket to the flange. Place it in the sink outlet. flange From under the sink, install the black mack gas- ket, white friction ring and retainer nut to the flange. Do not tighten the nut against the bottom of the sink at this time. seali

Résumé du contenu de la page N° 6

User instructions Turn the right handle clockwise to turn the cold water on. Turn the handle counter-clockwise to turn the cold water off. Turn the hot handle clockwise to turn the hot water on. Turn the hot handle counter-clockwise to turn the hot water off. Replacement Parts 1 handle 39291XX0 2 cold escutcheon 979XX0 3 hot escutcheon 978XX0 4 escutcheon 980XX0 5 Stop unit left closing 94008000  aerator - lavatory 973000 7 aerator - bidet 94005XX0 8 bidet swivel 9050XX0 9 spout -

Résumé du contenu de la page N° 7

Cleaning Recommendation for Hansgrohe Products Modern faucetry and shower products utilize a combination of materials to comply with the needs of the market with regard to design and functionality. To avoid damage, it is necessary to use some caution when cleaning. Damage caused by improper treatment is not covered under the Hansgrohe warranty. Cleaning Materials for Faucets and Showers • To remove lime scale, use only products made specifically for that purpose. Always follow the manufactur

Résumé du contenu de la page N° 8

C. Labor or other expenses for the disconnection, deinstallation, or return of the product for warranty service, or for installation or reinstallation of the product (including but not limited to proper packaging and shipping costs), or for installation or reinstal- lation of the product. D. Accessories, connected materials and products, or related products not manufactured by Hansgrohe. TO OBTAIN WARRANTY PARTS OR INFORMATION Contact your Hansgrohe retailer, or contact Technical Service at: Ha