Instruction d'utilisation Northern Industrial Tools 1/2" AirRatchet Wrench

Résumé du contenu de la page N° 1

Air Tools
ITEM# 1951202
1/2" Air Ratchet Wrench
USER'S MANUAL
Read carefully and understand RULES FOR SAFE OPERATION and instructions
before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Made in China

Résumé du contenu de la page N° 2

For technical questions and replacement parts, please call 1-800-222-5381. Thank you very much for choosing a NORTHERN TOOL + EQUIPMENT CO., Product! For future reference, please complete the owner's record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire instruction sheet to become familiar with this product before you begin using it. This product is designed for certain applicati

Résumé du contenu de la page N° 3

NOTE: READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT ASSEMBLY You Air Ratchet Wrench comes completely assembled. For information on parts, please refer to parts list & diagram on this manual. Air Connection 1.Remove the plastic cap from the rear of the motor housing. The cap is attached to the connection head. 2.You will need a union fitting (not included) before you can connect your Air Ratchet Wrench to an air compressor. Attach the Union fitting to the motor housing. Tighten the fitting.

Résumé du contenu de la page N° 4

MAINTENANCE Your Air Ratchet Wrench is best operated with an airline oiler. If you are using this tool without an airline oiler, follow steps below: 1.Disconnect the Air Ratchet from the air hose. 2.Apply a few drops of Pneumatic Tool Oil through the air line before each use, or every hour if used continuously. 3.Apply a few drops of oil to the Roll Pin. Squeeze the trigger a few times to lubricate. Diagram Part No. Description Qty. Part No. Description Qty. Housing 1 1 27 Washer 1 Thread ring

Résumé du contenu de la page N° 5

4 of 4