Instruction d'utilisation Sony WALL-MOUNT BRACKET SU-WL500

Résumé du contenu de la page N° 1

A-DLR-00-  12() 
Additional Information for
Using Sony Wall-Mount Bracket (SU-WL500)
Compatible TV models for this Wall-Mount Bracket information:
KDL-60NX801/KDL-60NX800/KDL-55HX701/KDL-46HX701/KDL-40HX701/KDL-52EX707/
KDL-46EX707/KDL-40EX707/KDL-32EX707/KDL-46EX705/KDL-40EX705/KDL-32EX705/
KDL-60EX703/KDL-52EX703/KDL-46EX703/KDL-40EX703/KDL-60EX701/KDL-52EX701/
KDL-46EX701/KDL-60EX700/KDL-52EX700/KDL-46EX700/KDL-40EX700/KDL-32EX700/
KDL-40EX40B/KDL-32EX40B/KDL-46EX607/KDL-40EX607/KDL-32EX

Résumé du contenu de la page N° 2

Installing the Wall-Mount Bracket Install the Base Bracket and Mounting Hooks. 1 Open the Wall-Mount Bracket package and check for all the required parts along with the Instructions. 2 Decide where you want to install your TV. Refer to the TV installation dimensions table. Dimension Table (except (KDL-32EX * KDL-32EX *) only) Screen center point Unit: inches (mm) Model Name Length for each mounting angle Display Screen center dimensions dimensions Angle (0°) Angle (20°)      

Résumé du contenu de la page N° 3

Unit: inches (mm) Model Name Length for each mounting angle Display Screen center dimensions dimensions Angle (0°) Angle (20°)         3 7 3 7 3 3 7 42 / 25 / 3 / 17 4 / 12 / 24 / 17 / KDL- 4 8 4 8 4 8 8 (1,085) (656) (95) (431) (121) (323) (616) (454) 46EX60 * 1 7 1 3 3 1 7 37 / 22 / 5 / 17 4 / 11 / 21 / 17 / KDL- 2 8 4 4 4 2 8 (952) (581) (133) (431) (120) (297) (546) (454) 40EX60 * 1 3 3 3 1 5 7 30 / 18 / 7 / 17 4 / 10 / 18 / 17 / KDL- 8 4 8 4 4 8 8 (764) (475) (185) (431) (120

Résumé du contenu de la page N° 4

CAUTION The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TV’s operating instructions for its weight. 3 Install the Base Bracket on the wall. Refer to the Instructions for SU-WL500. 4 Disconnect all the cables from the TV. 5 Secure the Mounting Hook to the rear of the TV. Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to the “Screw and Hook Locations Diagram/Table” s

Résumé du contenu de la page N° 5

KDL- EX60 * only Screw (+PSW6 × 16) Square hole Mounting Hook KDL- EX70 * only Screw (+PSW6 × 16) Before installing, remove screws Square hole Mounting Hook KDL-60NX80 * only Attach the Mounting Hook using the four Remove the bottom spacers and four cover and terminal M6 × 0 s  crews cover. supplied with the TV. Mounting Hook Before installing, remove screws Spacer Screw (M6 × 20) ✍ • Place the TV on the Table-Top Stand, when securing the Mounting Hook. • When installing

Résumé du contenu de la page N° 6

Screw and Hook Locations Diagram/Table Model Name Screw Locations Hook Location e, j a KDL-60NX80 */KDL-60EX70 * KDL-55HX701/KDL-60EX50 */ d, g a KDL-55EX50 * KDL-46HX701/KDL-40HX701/KDL-40EX40B/ KDL-46EX50 */KDL-40EX50 */ d, g b KDL-46EX40 */KDL-40EX40 * KDL-52EX70 */KDL-46EX70 */ e, j b KDL-40EX70 */KDL-46EX60 */ KDL-40EX60 * f, j c KDL-32EX70 */KDL-32EX60 * KDL-32EX40B/KDL-32EX50 */ e, g c KDL-32EX40 */KDL-32EX30 * * I n the actual model names, the “ ” indicates numbers

Résumé du contenu de la page N° 7

6 Adjust the angle of the Mounting Hook using the hexagon wrench supplied with the Wall-Mount Bracket. When installing the TV parallel to the wall (0 degrees), adjustment of the Mounting Hook angle (procedures  and  below) is not necessary. Make sure that each arm base X is screwed in securely.  R emove the two screws from the arm base X of the Mounting Hook. Choose the holes corresponding to the desired angle (5, 0,  5 o  r 0 degrees).  Adjust the angles of the top Y and bottom Z arm

Résumé du contenu de la page N° 8

9 Install the TV on the wall. Refer to the Instructions for SU-WL500. ✍ • When you put the TV back on the stand, reverse the above steps. • Remove the screws or install the Mounting Hook on a stable and level surface. Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) − 8 −