Instruction d'utilisation Pittsburgh Corning 95841

Résumé du contenu de la page N° 1

Digital t orque Wrench
95840
M o d e l
95841
asseMbly anD operation instructions
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
t o preVent serious injury, reaD anD unDerstanD
all Warnings anD instructions before use.
© ®
Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained herein m

Résumé du contenu de la page N° 2

specifications 95840-3/8” 95841-1/2” Drive 3/8” 1/2” Net Weight 2.2 Lbs. 2.55 Lbs. Carbon steel head and tube, Carbon steel head and tube, Material thermoplastic LCD read-out, thermoplastic LCD read-out, rubber Handle rubber Handle Tool Length 14-3/4” L 17-3/4” L Head Depth .75” T .75” T Head Width 1.7” W 1.7” W Gear Action 10 degrees 10 degrees Shaft Width 0.87” 0.87” 83.3 Ft-Lbs./ 1000 In. Lbs., 150 Ft.-Lbs., 1800 In. Lbs., Maximum Range m-KG 11.5/ cm - KG 1150/ m-Kg 20.7, CM-KG 2070, N-m

Résumé du contenu de la page N° 3

1. use only 1/2” (95841) or 3/8” (95840) sockets with the torque capability shown in the specifications chart on prior page. Otherwise, the socket could fly off the drive anvil or break apart, causing injury. 2. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. 3. Keep children away while operating the Digital t orque Wrench. Keep children out of the work area. 4. stay alert. Do not operate the Digital Torque Wrench while tired or under the influ-

Résumé du contenu de la page N° 4

d. If the Battery Cover is open 16. Do not bump or shock the t orque Wrench when applying it to any workpiece. Rough treatment may damage the highly sensitive mechanism. unpacKing When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. operation figure 1 Battery Compartment Battery Cover Battery Function Button Handle Dial (Torque rang

Résumé du contenu de la page N° 5

7. Press the socket onto the drive anvil of the Torque Wrench. 8. Set the Torque Wrench Direction Switch, located on the end of the Torque Wrench, for clockwise or counterclockwise operation. 9. Place the socket onto the nut or bolt and pull the Handle steadily until a click is heard or felt. 10. Stop pulling the Torque Wrench. replacing the battery 1. Except for replacing the battery, all other maintenance functions must be done by a qualified service technician. 2. When the Battery has

Résumé du contenu de la page N° 6

troubleshooting problem possible causes probable solutions LCD flashes 1. Battery charge is to low. 1. Replace Battery. continuously Display doesn’t 1. Circuit needs to be reset. 1. Remove the battery, wait 30 change when Handle seconds, replace battery and turn Dial is moved the Torque Wrench “On”. LCD display does not 1. Battery has poor connection or 1. Take battery out and adjust show battery voltage is to low connections. Replace the battery as necessary. Warranty Limited Lifetime arr

Résumé du contenu de la page N° 7

aDDitional inforMation SKU 95840-95841 for technical questions, please call 1-800-444-3353. Page 7