Résumé du contenu de la page N° 1
USERS GUIDE
MBP35BL, MBP35BW
BABY MONITOR
USERS GUIDE
The features described in this users guide are subject to
modifications without prior notice.
Résumé du contenu de la page N° 2
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP35BL, MBP35BW. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage. For product related questions
Résumé du contenu de la page N° 3
Overview of your Parent unit 1 12 5 13 2 11 6 TALK MENU 7 10 9 8 3 4 1. Display (LCD screen) 7. Microphone 2. Up < / Down > keys 8. Menu key m Normal mode: Adjust Press to open the Menu speaker volume options Menu mode: Adjust setting 9. Talk key t 3. Power and Low battery LED Press and hold to speak to ) )) 4. Voice Activation LED your baby. 5. Lullaby Play/Stop key i 10. Power key p Press once to play lullaby. Press and hold to turn on/off Press again to stop playing. the unit.
Résumé du contenu de la page N° 4
Parent Unit display symbols (contd) Appears when the Parent Unit is in registration mode. VOX Appears when setting the Voice Activation level. Overview of your Baby unit 1 7 2 3 8 6 4 9 5 1. Photo sensor 6. On/Off switch 2. Camera lens 7. Speaker 3. Infrared LEDs 8. Antenna 4. Power LED 9. Temperature sensor 5. Night lights Important guidelines for installing your Baby Monitor To use your video monitor baby and parent unit together, you must be able to establish a radio link between them, an
Résumé du contenu de la page N° 5
Table of contents 1. Safety Instructions......................................................................... 6 2. Getting started................................................................................ 7 2.1 Baby unit battery installation...........................................................7 2.2 Baby unit power supply ..................................................................8 2.3 Parent unit battery Installation........................................................8
Résumé du contenu de la page N° 6
1. Safety Instructions WARNING This baby monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the Users Guide, safe to use. Therefore, always read the instructions in this Users Guide carefully before using the device. Adult assembly is required. Keep small parts away from children when assembling. This product is not a toy. Do not allow children to play with it. This baby monitor is not a substitute for responsible ad
Résumé du contenu de la page N° 7
2. Getting started 2.1 Baby unit battery installation The camera uses either 3 AA size batteries (non-rechargeable batteries recommended) or the household power mains. The Baby unit has no charging function! screw IMPORTANT The non-rechargeable batteries for the Baby unit are not supplied with your product. We recommend the batteries to be installed before use, so that the unit continues to work in the event of a mains power failure. 1. Loosen the screw in a counterclockwise direction using
Résumé du contenu de la page N° 8
2.2 Baby unit power supply 1. Connect the small plug of the power adapter to the baby unit and the other end to the mains socket (230V/50Hz). NOTE Only use the enclosed power adapter (6V DC / 800mA). 2. Slide the power switch to the ON position. The power LED will light up in green. 3. To switch off the baby unit, slide the power switch to OFF position. 2.3 Parent unit battery Installation Black Red 8 Getting started
Résumé du contenu de la page N° 9
1. Loosen the screw in a counterclockwise direction using a small screwdriver. Remove the battery cover. 2. Insert the wire tab of the rechargeable battery pack into the contact slot as shown above and fit the battery pack into the compartment. 3. Close the battery compartment and tighten the screw in a clockwise direction. 4. Press and hold p to switch ON the parent unit. - It will take a few seconds to start up the unit. 5. Press and hold p to switch OFF the parent unit. NOTE When the bat
Résumé du contenu de la page N° 10
2. Press and hold p to switch ON the parent unit. The power LED will light up in green. 3. Press and hold p to switch OFF the parent unit. NOTE Once the baby and parent units are switched on, the display on the parent unit will show the video captured by the baby unit. When the VOX mode is on, the screen will turn off after a few seconds if the sound near the baby unit drops below the Voice Activation threshold level of the unit. When there is no connection or out of range, the icon on the L
Résumé du contenu de la page N° 11
3. Using the Baby Monitor MBP35BL, MBP35BW 3.1 Setting up Place the camera in a convenient location and point the lens of the camera towards the area you want to monitor. Tilt the head of the baby unit up or down to your desired position until the parent unit gets a good reception of the baby. NOTE Do not place the camera within babys reach! If there is interference on the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical e
Résumé du contenu de la page N° 12
3.5 Playing a lullaby for your baby You can remotely activate a lullaby to be played on the Baby Unit. 1. Press the i button on the Parent Unit to play the last set lullaby. 2. To select another lullaby, press j during playback. There are 5 lullabies available for selection, indicated by 1, 2, 3, 4 or 5. 3. To play all lullabies, press j until is displayed on the display screen. 4. Press i again to stop playback. TIPS During the first 10 seconds of lullaby playback, pressing < or > will
Résumé du contenu de la page N° 13
4. MBP35BL, MBP35BW Parent Unit Menu Options 4.1 Brightness 1. Press m repeatedly until appears on the display screen. 2. Press < and > to adjust the LCD brightness level to 1, 2, 3, 4, or 5 (the default setting is 3). The LCD brightness will be adjusted accordingly. 3. Press m repeatedly to exit. 4.2 Temperature Display (ºC or ºF) 1. Press m repeatedly until appears on the display screen. 2. Press < and > to change the temperature display to ºC, ºF or OFF (the default setting is ºC). The
Résumé du contenu de la page N° 14
4.4 Voice Activation If you do not want the parent unit screen to be on continually, you can set the VOX mode so that the screen only turns on if there is a sound near the baby unit. The sound detection sensitivity level (VOX) of the Baby Monitor can be adjusted. If the baby is a quiet sleeper, the sensitivity level can be increased so that only minor disturbances will cause the parent unit screen to turn back on. 1. Press m repeatedly until VOX appears on the LCD screen. Press < and > to a
Résumé du contenu de la page N° 15
5. Disposal of the device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste, but take the product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, users guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to
Résumé du contenu de la page N° 16
6. Cleaning Clean the MBP35BL, MBP35BW with a slightly damp cloth or with an anti- static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the Warranty. When necessary, clean it with a damp cloth. Keep your MBP35BL, MBP35BW away from hot, humid areas or strong sunlight, and dont let it get wet. Every effort
Résumé du contenu de la page N° 17
7. Help Display No display Try recharging or replacing the batteries. Reset the units. Unplug the units electrical power, including the batteries and both mains adapters, then plug them back in. Is the unit turned on? Press and hold p on the parent unit to turn it on. Is the VOX mode on? Turn the VOX off (see 4.4 Voice Activation) to keep the screen on continually. Registration If the baby unit has lost its link with the parent unit Try recharging or replacing the batteries. If
Résumé du contenu de la page N° 18
8. General Information If your product is not working properly.... 1. Read this Users Guide or the Quick Start Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at: 0845 218 0890 in the UK (65) 68412668 in Singapore To order a replacement battery, contact customer service or visit our website. Consumer Products and Accessories purchased in the United Kingdom and Singapore What Does this Warranty Cover? Subject to the exclusions and limitations contained below, Binato
Résumé du contenu de la page N° 19
What will BINATONE ELECTRONICS INTERNATIONAL LTD. do? BINATONE ELECTRONICS INTERNATIONAL LTD., at its sole option, will at no charge repair, replace or refund the purchase price of any Products or Accessories that does not conform to this warranty. Binatone Electronics International LTD. may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts in such repair or replacement and any Products, Accessories or parts removed or being replaced u
Résumé du contenu de la page N° 20
ACCESSORIES AND BINATONE ELECTRONICS INTERNATIONAL LTD. SHALL UNDER NO CIRCUMSTANCES BE LIABLE FOR ANY CLAIMS OR DEMANDS MADE BY ANY THIRD PARTY OR MADE BY YOU ON BEHALF OF ANY THIRD PARTY TO THE FULL EXTENT THESE DAMAGES OR CLAIMS MAY BE DISCLAIMED BY LAW. Some states, countries or jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you in
