Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Introduction READ THIS BEFORE OPERATING YOUR UNIT This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. : TO REDUCE THE RISK OF CAUTION ELECTRIC SHOCK, DO NOT This symbol is intended to alert the user to the REMOVE COVER (OR BACK). NO presence of important operating and USER-SERVICEABLE PARTS maintenance (servicing) instructions in the INSID
Résumé du contenu de la page N° 3
SAFETY INSTRUCTION 1. Read Instructions - All the safety and operating instructions should grounding conductors, location of antenna-discharge unit, be read before the product is operated. connection to grounding electrodes, and requirements for the 2. Retain instructions - The safety and operating instructions should grounding electrode. See Figure 1. be retained for future reference. 3. Heed Warnings - All warnings on the product and in the operating instructions should be adhered to. 4. Follo
Résumé du contenu de la page N° 4
CONTENTS • Introduction READ THIS BEFORE OPERATING YOUR UNIT | 2 SAFETY INSTRUCTION | 3 • System Connections | 6 • Controls & Displays FRONT PANEL CONTROLS(VR-670) | 9 UNIVERSAL REMOTE CONTROLS | 10 ENTERING A SETUP CODE | 11 OPERATING COMPONENTS WITH REMOTE CONTROL | 12 REMOTE CONTROL OPERATION RANGE | 12 LOADING BATTERIES | 13 ACTIVE SUBWOOFER CONTROLS(ASW-670) | 13 OPERATION OF ACTIVE SUBWOOFER | 14 • Basic Operation LISTENING TO A P
Résumé du contenu de la page N° 5
• Operation of Other Functions RECORDING WITH TAPE DECK | 45 DIGITAL AUDIO RECORDING WITH MD RECORDER | 45 SETTING THE CLOCK | 46 OPERATING THE SLEEP TIMER | 47 OPERATING THE TIMER | 47 ADJUSTING THE BRIGHTNESS OF THE DISPLAY | 50 • Troubleshooting Guide | 51 • Specifications | 53 • DVD Language Code List | 55 • Setup Code Table | 56 5 ENGLISH
Résumé du contenu de la page N° 6
System Connections • Do not plug the AC input cord into the wall AC outlet until all connections are completed. • Be sure to observe the color coding when connecting audio and video cords. • Make connections firmly and correctly. If not, it can cause loss of sound, noise or damage to the unit. • The supplied cords are a audio cord for subwoofer, a composite video cord and speaker cables only. Other cords are commercially-available cords. 2 1 2 5 4 3 4 1. CONNECTING ANTENNAs • Change the position
Résumé du contenu de la page N° 7
2. CONNECTING AUDIO/VIDEO COMPONENTs • The AUX IN jacks may be connected to an additional audio component such as a CD player, a tape deck, etc. • The AUDIO OUT jacks may be connected to an additional amplifier or receiver. • The COMPONENT VIDEO OUTs of this unit are capable of outputting either conventional interlacing video signal or progressively scanned video signal (that can reproduce high-density pictures with less flicker) • According to the kinds of VIDEO OUTs, the excellence in picture
Résumé du contenu de la page N° 8
continued Notes : • To output the digital audio signals, you should set the SPDIF Output to “(SPDIF/) RAW” or “(SPDIF/) PCM” (Refer to “When selecting the SPDIF Output” on page 35.) • When the DIGITAL OUT of the unit is connected to the DIGITAL IN of an amplifier which does not contain the Dolby Digital or DTS decoder, etc.(which processes the bitstream digital), you should set the SPDIF Output to “(SPDIF/)PCM”. If not, loud noise or no sound may be heard from the speakers, and it may be harmful
Résumé du contenu de la page N° 9
Controls & DIsplays FRONT PANEL CONTROLS(VR-670) PHONES 1. POWER button 7. STOP( ) button 2. FUNCTION SELECT button 8. OPEN/CLOSE( ) button 3. VOLUME UP/DOWN (+/-) buttons 9. PHONES jack 4. TONE/BALANCE SELECT button 10. STANDBY indicator 5. PRESET TUNING UP/DOWN, 11. DISC TRAY FORWARD/BACKWARD SKIP( / ) 12. REMOTE SENSOR buttons 13. FLUORESCENT DISPLAY 6. PLAY/PAUSE( / ) button • For details, see below. FLUORESCENT DISPLAY 9 ENGLISH
Résumé du contenu de la page N° 10
UNIVERSAL REMOTE CONTROLS This universal remote control can operate not only this unit but also most popular brands of video components such as TVs, VCRs, cable boxes, satellite receivers, etc. • To operate 4 components other than this unit, you should enter the setup code for each component. (For details, refer to “ENTERING A SETUP CODE” on page 11.) • The numbered buttons on the remote control have different functions in other device modes. For details, refer to “FUNCTION TABLE of the NUMBERE
Résumé du contenu de la page N° 11
FUNCTION TABLE of the NUMBERED BUTTONS Notes: • Some functions for each component may not be available or may work differently. • Depending on other kinds of components that are available for each DEVICE button, some functions may not be available or may work differently, too. • For details about functions, refer to the operating instructions of each component. ENTERING A SETUP CODE • This remote control can control up to 4 different components. • Before operating video components other than thi
Résumé du contenu de la page N° 12
OPERATING COMPONENTS WITH REMOTE CONTROL Enter the setup code for each component other than this unit you wish to control. For details, refer to “ENTERING A SETUP CODE” on page 11. 1 Turn on the component you want to operate. 2 Press the DEVICE button on the remote control corresponding to the component you wish to operate. 3 Example) When selecting “MAIN” to operate this unit. Aim the remote control at the REMOTE SENSOR of the component you wish to control and press the button corresponding to
Résumé du contenu de la page N° 13
LOADING BATTERIES • When the remote control does not operate, the old batteries should be replaced. In this case, load new batteries within several minutes after removing old batteries. • If the batteries are removed or have been exhausted for a longer period of time, memorized contents will be cleared. Should this happen, you should memorize them again. Remove the cover. Load two batteries (“AAA” size, 1.5V) matching the polarity. 1 2 • Remove the batteries when they are not used for a long tim
Résumé du contenu de la page N° 14
OPERATION OF ACTIVE SUBWOOFER • Before operation of main unit, first set the active subwoofer as desired for optimum performance. Enter the standby mode. • The SIGNAL IN indicator lights up in amber. 1 POWER OFF ON This means that the subwoofer is not disconnected from the AC mains and a small amount of current is retained to support the operation readiness. • To switch the power off, push the POWER switch again. Then power is cut off and the SIGNAL IN indicator goes off. In the standby mode, se
Résumé du contenu de la page N° 15
Basic Operation Before operation • Before operating this unit with the supplied remote control, refer to "UNIVERSAL REMOTE CONTROLS" on page 10 for details about operation. LISTENING TO A PROGRAM SOURCE Turn the power on. • Each time the POWER button is pressed, the unit is turned on to enter the operating mode(the STANDBY indicator lights up in blue)or off to enter the standby mode(the STANDBY indicator lights 1 up in amber). • In the standby mode, if the PLAY/PAUSE( / ) or OPEN/CLOSE( ) button
Résumé du contenu de la page N° 16
Adjusting the tone(bass and treble) and balance • You can adjust the tone(bass and treble) and the sound volume balance between the left and right speakers as desired. Select the desired mode • Each time this button is pressed, the mode changes and is displayed for several seconds as follows : TRBL BASS BAL 8 (Treble) (Balance) • When the mode display disappears, press this button again. • On the remote control, when adjusting the treble or bass, At the desired mode, ad
Résumé du contenu de la page N° 17
Operation of DVD player PRELIMINARY KNOWLEDGE ABOUT DISCS Playable disc types This unit can play not only the discs bearing any of the Markings on the DVD Videos following marks but also CD-R/CD-RW discs recorded with Audio CD or MP3 format and DVD-R discs recorded with Mark Description DVD-Video format. Indicates the region code where the disc can be CD DVD VIDEO played. Logo mark Number of audio languages recorded with multiple audio languages. The number in the 3 (8 cm) / 3 (8 cm) / mark ind
Résumé du contenu de la page N° 18
ABOUT MP3 DISCS CARE AND HANDLING OF DISCS This unit can play back MP3 files on a private CD-R/CD-RW • In handling a disc, hold it carefully with edges. disc or commercial CD. Notes: • Some discs may not be played back because of the disc characteristics or recording condition, etc. • Folder and file names are displayed up to 14 characters. • Characters except “A~Z”, “0~9”, “ - ” may be not displayed • Do not stick paper or write anything on the printed correctly. surface. • The order shown in
Résumé du contenu de la page N° 19
DEFINITION OF TERMS DVD Video Component video This refers to a high-density optical disc on which high- Video signals with three channels of separate information quality pictures and sound have been recorded by means that makes up the picture. There are some types of of digital signals. Incorporating a new video compression component video, such as Y/CB(Pb)/CR(Pr) and R/G/B. technology (MPEG-2) and high-density recording technology. DVD Video enables esthetically pleasing full- Bitstream mo
Résumé du contenu de la page N° 20
Before starting playback For your convenience, the OSD(On-Screen-Display) language of this unit may be set to English as initial setting. If you want to change the OSD language to French, Italian, German, etc., please refer to “When selecting the OSD Language” on page 35. BASIC PLAYBACK Preparations • Turn on the TV and select the video input source connected to the unit. • Set the TV screen type and the COMPONENT VIDEO OUTPUT SIGNAL correctly to match your TV.(Refer to “When selecting the TV Di
