Instruction d'utilisation Philips M2926A

Résumé du contenu de la page N° 1

M2922A, M2925A, M2926A
Philips FM-2
Portable Antepartum
Fetal Monitor
 12-hours memory for fetal traces.
Features
 Internal battery power or AC power from external
power supply.
 6-hours (approx.) battery back-up operation,
rechargeable during normal monitoring.
 Download capability to transmit traces stored in
its memory to a PC or a Philips OB TraceVue
surveillance and alerting system.
 Online transmission to a monitoring system such
as OB TraceVue.
 Easily connects to off-the-shelf

Résumé du contenu de la page N° 2

Alerting connected continuously to the FM-2 monitor. The FHR alarming has configurable upper, lower Monitor Connectors and Interfaces and delay time alarm limits. Enabled alerts are both  RS232 serial port (9pin male) for modem, PC, visible and audible. Alerting can be switched off. cellular phone.  Standard parallel printer port for connecting Transducers printer or recorder. It uses the same transducers originally designed for  Connector for remote event marker cable. high acuity care

Résumé du contenu de la page N° 3

 M1913A - Paper Monitoring Accessories Case of 40 packs thermal recorder paper, 0-100 mmHg IUP scale, 50-210 FHR scale, 1 min Standard Accessories and Supplies (3cm) highlighted lines. Green. Not available in These are included with the monitor Europe.  1 x Doppler Ultrasound FHR Transducer- 1 M1356A Associated Products  1 x External TOCO Transducer - M1355A External Recorder (M2925A)  1 x Remote Event Marker - 15249A The recorder is an external device for printing stored  2 x Reusabl

Résumé du contenu de la page N° 4

Recharge without Maximum 8 hours to Specifications monitoring: full recharge when no monitoring occurs (typical Monitor (M2922A) 4.75 hours). Federal Law restricts this device to use by or on the Low power warning: Approximately 30 minutes 1 o order of a physician. at 25 C. Standards Compliance Power - External Power Supply AC-powered 110-120V~, 50-60Hz, The FM-2 Portable Antepartum Fetal Monitor 0.15A complies with the requirements of the Medical or Device Directive 93/42/EEC and the

Résumé du contenu de la page N° 5

Weight 75g (2.65oz) Width: 23.4cm (9.2 inches) Latex free Depth: 26.2 cm (10.3 inches) Weight: 3.54 kg (7lb 13oz) Reusable Abdominal Belt (M1562A) Standards Compliance Length: 1.3m (52in) Width: 50mm (2in) Safety With button holes, and pre-attached buttons. Can - Complies with EN60601-1, EN60601-1-1 be further cut. Contains latex. - Class I equipment, requires 3-prong outlet with protective earth FM-2 Viewer Utility Software - Continuous operation (M2926A) Electromagnetic Compatibility Windows

Résumé du contenu de la page N° 6

Philips offers a wide range of fetal monitors for capabilities of all fetal monitors to help you choose different environments and applications. Review the the monitor that is right for your needs. Feature Table legend: • Standard o Optional − Unavailable Designed for portability/transport •− − − − Integrated fetal trace display •− − − − On screen NST assessment aid •− − − − Battery operation and AC operation from power supply •− − − − Off the shelf printer interface •− − − − PC utility s

Résumé du contenu de la page N° 7

Résumé du contenu de la page N° 8

Philips Medical Systems is part of Royal Philips Electronics CORPORATE HEADQUARTERS: Philips Medical Systems Nederland B.V. Postbus 10.000 5680 DA Best Netherlands UNITED STATES: Philips Medical Systems Cardiac and Monitoring Systems 3000 Minuteman Road Andover, MA 01810 (800) 934-7372 CANADA: Philips Medical Systems 2660 Matheson Blvd. E. Mississauga, Ontario L4W 5M2 (800) 291-6743 EUROPE, MIDDLE EAST AND AFRICA: Philips Medizinsysteme Böblingen GmbH Cardiac and Monitoring Systems Hewlett-Pack