Résumé du contenu de la page N° 1
®
SUPER
SUPERSERVER 6015T-T
SUPERSERVER 6015T-INF
USER’S MANUAL
Revision 1.0b
Résumé du contenu de la page N° 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. Super Micro Computer, Inc. ("Supermicro") reserves t
Résumé du contenu de la page N° 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6015T-T/6015T- INF. Installation and maintenance should be performed by experienced technicians only. The SuperServer 6015T-T/6015T-INF is a 1U Twin (two serverboards in a 1U chas- sis) rackmount server based on the SC808T-980 server chassis and two Super X7DBT-T/X7DBT-INF serverboards. The X7DBT-T/X7DBT-IN
Résumé du contenu de la page N° 4
SUPERSERVER 6015T-T/6015T-INF User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 6015T-T/6015T-INF. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X7DBT-T/X7DBT-INF serverboard, including the locations and functions of connectors, headers and jumpers. Refer to this chapter when adding or
Résumé du contenu de la page N° 5
Preface Notes v
Résumé du contenu de la page N° 6
SUPERSERVER 6015T-T/6015T-INF User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Serverboard Features .....
Résumé du contenu de la page N° 7
Table of Contents HDD ........................................................................................................ 3-2 Power ...................................................................................................... 3-3 3-4 SATA Drive Carrier LEDs ................................................................................. 3-3 Chapter 4: System Safety 4-1 Electrical Safety Precautions ........................................................................... 4-
Résumé du contenu de la page N° 8
SUPERSERVER 6015T-T/6015T-INF User's Manual Wake-On-Ring ........................................................................................ 5-16 Serial Ports ............................................................................................. 5-16 SGPIO Header ....................................................................................... 5-16 2 SMB Power (I C) .................................................................................... 5-17 SMB ..............
Résumé du contenu de la page N° 9
Table of Contents Appendices: Appendix A: BIOS POST Messages Appendix B: BIOS POST Codes Appendix C: Intel HostRAID Setup Guidelines Appendix D: System Specifi cations ix
Résumé du contenu de la page N° 10
SUPERSERVER 6015T-T/6015T-INF User's Manual Notes x
Résumé du contenu de la page N° 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The SuperServer 6015T-T/6015T-INF is a "1U Twin" server comprised of the SC808T-980 1U chassis and two (twin) X7DBT-T/X7DBT-INF serverboards. Please refer to our web site for information on operating systems that have been certifi ed for use with the 6015T-T/6015T-INF (www.supermicro.com). In addition to the serverboard and chassis, various hardware components may have been included with the 6015T-T/6015T-INF,
Résumé du contenu de la page N° 12
SUPERSERVER 6015T-T/6015T-INF User's Manual 1-2 Serverboard Features At the heart of the SuperServer 6015T-T/6015T-INF lies two X7DBT-T/X7DBT-INF dual processor serverboards, which are based on Intel's 5000P chipset. Below are the main features of the X7DBT-T/X7DBT-INF. Note that the features on each board are doubled for the server (see Appendix C). Processors Each X7DBT-T/X7DBT-INF supports dual Intel® Xeon® 5300/5100 Series proces- sors. Please refer to our web site for a complete lis
Résumé du contenu de la page N° 13
Chapter 1: Introduction Onboard Controllers/Ports An onboard IDE controller supports Ultra ATA 100 hard drives or ATAPI devices. Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports, two Gigabit LAN (NIC) ports and (on the 6015T-INF only) an Infi niBand® port. There are two sets of I/O ports included in the server (one set for each severboard). Infi niBand Port Bracket: The Infi niBand port bracket is a small "U" shaped bracket that secures the connector to the I/O po
Résumé du contenu de la page N° 14
SUPERSERVER 6015T-T/6015T-INF User's Manual VRM VRM PROCESSOR#2 PROCESSOR#1 667/1067/1333 667/1067/1333 MT/S MT/S #3B #4B #1B #2B PCI-EXP X8 PORT FBD CHNL0 #3A #1A #2A #4A IB #4,5 FBD CHNL1 MCH FBD CHNL2 FBD CHNL3 PORT PCI-EXP X8 #6,7 PORT PORT #2,3 #0 PORT PORT #4 #3 PCI-X PORT #2 #3 #2 #1 #0 ESB2 3.0 Gb/S PORT #1 28 PORT #4 #0 #3 #2 #1 #0 USB 2.0 VGA PCI33MMZ VGA ES1000 CONN LPC SIO RJ45 GB LAN FWH W83627 GILGAL EHF RJ45 MS COM2 KB Figure 1-1 . Intel 5000P Chipset: System Block Diagram
Résumé du contenu de la page N° 15
Chapter 1: Introduction 1-3 Server Chassis Features The following is a general outline of the main features of the SC808T-980 1U chas- sis. Details on the chassis can be found in Chapter 6. System Power When confi gured as a SuperServer 6015T-T/6015T-INF, the SC808T-980 includes a single 980W cold-swap power supply, which provides the power to both server- boards housed in the chassis. SATA Subsystem The SC808T-980 chassis was designed to support four SATA hard drives, which are hot-swappabl
Résumé du contenu de la page N° 16
SUPERSERVER 6015T-T/6015T-INF User's Manual 1-4 1U Twin: System Notes As a 1U Twin confi guration, the 6015T-T/6015T-INF is a unique server system. With two system boards incorporated into a single chassis, there are several points you should keep in mind. System Power A single power supply is used to provide the power for both serverboards. Each serverboard however, can be shut down independently of the other with the power button on its own control panel. 2 Although they share a common
Résumé du contenu de la page N° 17
Chapter 1: Introduction 1-5 Contacting Supermicro Headquarters Address: Super Micro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: Super Micro Computer, B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenbosch, The Netherlands Tel: +31 (0) 73-6400390 Fax: +31 (0) 73-6416525 Email: sales@supermicro.nl (Gene
Résumé du contenu de la page N° 18
SUPERSERVER 6015T-T/6015T-INF User's Manual Notes 1-8
Résumé du contenu de la page N° 19
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your 6015T-T/6015T-INF up and running. Following these steps in the order given should enable you to have the system operational within a minimum amount of time. This quick setup assumes that your system has come to you with the processors and memory preinstalled. If your system is not already fully integrated with a serverboard, pro
Résumé du contenu de la page N° 20
SUPERSERVER 6015T-T/6015T-INF User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for suffi cient airfl ow and ease in servicing. - This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). - This product is not suitable for use with visual d
