Instruction d'utilisation Swann SW212-HXD

Résumé du contenu de la page N° 1

plug&playsecurity
Advanced security made easy™
Home Outdoor Security Kit
1 Real & 1 Imitation Camera
PNP-150/2D™
Quick Start Guide
SW212-HXD
SR212-HXD-10006-040609
1
www.swannsecurity.com

Résumé du contenu de la page N° 2

Before You Begin FCC Verification: NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de- signed to provide reasonable protection against harmful interference in a residen- tial installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television receptio

Résumé du contenu de la page N° 3

Table of Contents Before You Begin 2 Table of Contents 3 Package Contents 3 Connection Guide 4-5 Viewing the Camera on Your TV or VCR 6 Tips & Suggestions 6 Troubleshooting Guide 7 Helpdesk / Technical Support Details 8 Warranty Information 8 Package Contents PNP-150 Security Camera Power Adapter PNP-150 Imitation Camera Quick Start Guide Camera Stand x 2 Security Stickers BNC Extension Cable Mounting Hardware BNC to RCA Adapter plug&playsecurity Advanced security made eas

Résumé du contenu de la page N° 4

Connection Guide Plug in the Camera Power Adapter 4 Connect the Extension Cable to the Power 3 Adapter Connect the camera cable to the Extension 1 Cable 2A. Connecting Directly to TV 2B. Connecting to Your Existing DVR Connect the BNC Extension Connect the BNC to RCA Cable to an open channel on Adapter and connect to Video 2 2 the back of the DVR Input on your TV or VCR INPUT 4 4 4 4

Résumé du contenu de la page N° 5

Plug in the Camera Power Adapter 4 Connect the Extension Cable to the Power 3 Adapter Connect the camera cable to the Extension 1 Cable 2A. Connecting Directly to TV 2B. Connecting to Your Existing DVR Connect the BNC Extension Connect the BNC to RCA Cable to an open channel on Adapter and connect to Video 2 2 the back of the DVR Input on your TV or VCR INPUT 5 5

Résumé du contenu de la page N° 6

Viewing the Camera on Your TV or VCR Viewing the PNP-150 on a TV After connecting the PNP-150 Camera directly to your TV and powering it on as described on page 4, tune the TV to the correct input channel. On your TV’s remote control, the input button is usually labelled as Input, Source, A/V, Channel 0, AUX etc.* Viewing and Recording the PNP-150 on a VCR Connect the PNP-150 into an available input channel on your VCR in the same manner as the TV connection listed on page 4. Turn on your VC

Résumé du contenu de la page N° 7

Troubleshooting Guide Problem: I can’t see the camera on my TV. Solution: Ensure the camera is plugged in and the TV or VCR is tuned to the correct input channel. Problem: When I view my camera at night I only see a bright spot and no image. Solution: Night Vision will reflect when shining through a window. Move the camera to the other side of the window or another location. Problem: The BNC Extension Cable will not connect to my TV. Solution: Connect the BNC to RCA adapter to the end of the

Résumé du contenu de la page N° 8

Helpdesk / Technical Support Details Swann Technical Support All Countries E-mail: tech@swannsecurity.com Telephone Helpdesk USA toll free AUSTRALIA toll free 1-800-627-2799 1300 138 324 (Su, 2pm-10pm US PT) (M 9am-5pm AUS ET) (M-Th, 6am-10pm US PT) (Tu-F 1am-5pm AUS ET) (F 6am-2pm US PT) (Sa 1am-9am AUS ET) USA Exchange & Repairs NEW ZEALAND toll free 562-777-2551 0800 479 266 (M-F, 9am-5pm US PT) INTERNATIONAL +61 3 8412 4610 See http://www.worldtimeserver.com for information on time zones