Instruction d'utilisation Samsung SHG-220

Résumé du contenu de la page N° 1

OUTDOOR HOUSING
SHG-220/SHG-220S
Installation Manual
GB
Instalationshandbuch
Manuel D’installation
D
Manual De Instalación
F
E
C
J
K

Résumé du contenu de la page N° 2

IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions should be read before the unit is operated. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the unit and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Attachments - Do not use attachments not recommended by the product manufacturer as

Résumé du contenu de la page N° 3

FCC & ICES INFORMATION (U.S.A.AND CANADIAN MODELS ONLY) WARNING - This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and radiates radio frequency energy and, if not installed and used in accordance with

Résumé du contenu de la page N° 4

Summary The Outdoor Housing (SHG-220/SHG-220S) is used for installating the Smartdome Camera on an outdoor wall or ceiling. Precautions Before Installation Make sure that the proposed location can support the combined weights of the • Corner Mounted Adaptor, Wall Mounted Adaptor, Outdoor Housing and Smartdome Camera (about 11 kg). Use a 24V AC, 3.0 A power adaptor. • This goods should only be installed by a qualified technician using approved materials • and wiring practices in ac

Résumé du contenu de la page N° 5

Connect the Outdoor Housing power cable to the camera 3 adaptor's AC 24V-out connector. HOUSINMG GB CAMERA ADAPTOR Connect the power cable, video-out cable and 4 communications cable to the camera adaptor. (For details, refer to the Smartdome Camera User's Guide.) After tidying up the cables, align the camera adaptor lever 5 with the cover top boss and fasten it to the cover top using four screws (M4 x 8). CAMERA ADAPTOR Boss LEVER 4

Résumé du contenu de la page N° 6

Disengage the dome from the Smartdome Camera. 6 1) Loosen the (M2) screw on the side of Smartdome Camera, turn the dome clockwise about 15 degrees and pull it off. SMARTDOME CAMERA DOME 15 degree Align the arrow on the camera adaptor with the arrow on the 7 Smartdome Camera, insert the three bosses on the back of the camera into the three camera adaptor holes, together with the connectors, and turn the camera about 15 degrees clockwise. (Listen for the click that confirms engagement and make sur

Résumé du contenu de la page N° 7

Secure the camera body to the camera adaptor using the screw (BH 8 M3 x L8) provided with the Smartdome Camera. • To disengage the camera from the camera adaptor, loosen the engaging screw (BH M3 x L8), turn the camera counterclockwise while the locking lever is turned clockwise, and pull the camera off. GB For smooth assembly of the dome, apply silicon grease to the 9 gasket, align it with the boss and push the dome vertically into the housing. GASKET (GREASE APPLICATION) DOME 6

Résumé du contenu de la page N° 8

Insert three pins into the side of the Housing and insert the 10 screws (M3 x L12) into the pins from below. PIN Product Specifications External dimensions: 1 1/2" NPT PIPE THREAD ø 266 x H259 Weight: 3.7kg Suitable Temperature range: - 40°~ 50°C Suitable Humidity range: 0~100% Fan operating temperature: 45°C or higher Heater operating temperature: 10°C or less 172 259 168 266 7

Résumé du contenu de la page N° 9

Accessories .......................... Screw(BH M3 X L12) 3 ........................................................ PIN 3 ........................ SILICON GREASE 5g 1 GB 8

Résumé du contenu de la page N° 10

AB68-00235A PRINTED IN KOREA