Instruction d'utilisation Radio Shack 49-2514

Résumé du contenu de la page N° 1

32/+PEJ"$(9"5KPING"%JCPPGN"5GEWTKV["
/QPKVQT
6;/4736 OWNER’S MANUAL — Please read before using this equipment.
Thank you for purchasing the RadioShack B&W 10-Inch 1-
"+/2146#06"
# #
Channel Security Monitor. Your monitor is an important
If an icon appears at the end of a
addition to your existing security system. It features flexible
paragraph, go to the side head box
operation with many security oriented benefits.
on that page with the
corresponding icon for pertinent
10-Inch (Measured Di

Résumé du contenu de la page N° 2

Preparation %100'%6+0)"#"%#/'4# Follow these steps to connect either the RadioShack Cat. No. 49-2515 or 49-2516 camera. Use the cable that comes with the camera to make the connections. 1. Connect the mini-DIN plug at one end of the 59-foot CAMERA IN cable supplied with the camera to the mini- DIN jack on the rear of the monitor. 2. Connect the other end of the cable to the mini-DIN jack at the end of the cable from the camera. 3. Plug the monitor’s AC power cord into a standard AC outlet

Résumé du contenu de la page N° 3

%10641.5"#0&"(70%6+105 3 MIC (Microphone) — Talk toward this to communicate with H-HOLD (Horizontal Hold) — Stops someone near the camera. horizontal tearing. (Volume) — Adjusts the VOL volume of the sound picked up by the camera. VCR — Press to view the signals from the A-IN and V-IN jacks. CONT (Contrast) — Adjusts the V-HOLD (Vertical Hold) — contrast between the dark and Stops the picture from rolling. light parts of the picture. — Press and hold to TALK ALARM — Press to enter o

Résumé du contenu de la page N° 4

Connections %100'%6+105 4

Résumé du contenu de la page N° 5

Camera installations in excess of 59 feet from the monitor can be accomplished with extension cables, such as catalog numbers 980-0646 (131-foot cable) or 980-0647 (196-foot cable). Both of these extension cables require an extension adapter (catalog number 980-0671.) 5 Connections

Résumé du contenu de la page N° 6

Operation 12'4#6+10 Press POWER on the monitor. If the VCR indicator lights, ±"016'5"±" press VCR so the indicator turns off to view the signals from camera. If you connected a second camera to the V-IN/A-IN jacks, press VCR To talk to someone near the camera, hold down TALK so so the indicator lights to view the the TALK indicator lights. Speak into MIC beneath the signal from the second camera. screen. Release TALK to listen. 75+0)"6*'"#.#4/"/1&' Press ALARM so the ALARM indicator light

Résumé du contenu de la page N° 7

4. Select the desired recording speed and other settings on your VCR. 5. Begin recording. 8%4"2.#;$#%-"61"6*'"/10+614 To view a recorded tape through the monitor, follow these steps. 1. Turn on the monitor and the VCR. 2. Press VCR on the monitor's front panel. The VCR indicator lights. 3. Begin playback on the VCR. 6417$.'5*116+0) If your monitor is not working as it should, these suggestions might help you eliminate the problem. If the monitor still does not operate properly, take it to y

Résumé du contenu de la page N° 8

Specifications Cannot play back using the monitor. Limited Ninety-Day Warranty • Check the cable connections. Be sure the audio and This product is warranted by RadioShack against manufacturing defects in material and workman- video cables are not reversed. ship under normal use for ninety (90) days from the date of purchase from RadioShack company- • Be sure the VCR is set to play. owned stores and authorized RadioShack fran- chisees and dealers. EXCEPT AS PROVIDED HEREIN, RadioShack MAKES NO