Résumé du contenu de la page N° 1
Security
Security
System
System
User's Manual
VIA-30PSE, VISTA-10SE
®
N7229V2 Rev C. 5/02
Résumé du contenu de la page N° 2
TABLE OF CONTENTS SYSTEM OVERVIEW...................................................................................... 3 ARMING ALL PROTECTION (MAXIMUM)............................................. 19 General.......................................................................................................... 3 DISARMING THE SYSTEM AND SILENCING ALARMS 20 ..................... Zones.............................................................................................................
Résumé du contenu de la page N° 3
SYSTEM OVERVIEW General Congratulations on your ownership of an Ademco Security System. You've made a wise decision in choosing it, for it represents the latest in security protection technology today, including microcomputer technology to monitor all system status. Ademco is the world's largest manufacturer of security systems and millions of premises are protected by Ademco systems. Basically, this system offers you three forms of protection: burglary, fire and emergency. Your system may consi
Résumé du contenu de la page N° 4
SYSTEM OVERVIEW Alarms When an alarm occurs, both the keypad and external sounders will sound, and a message at the keypad will identify the zone(s) causing the alarm. In addition, if your system is connected to a central monitoring station, an alarm message will be sent. To stop the alarm sounding, you simply disarm the system. Fire Protection When an alarm or trouble condition occurs, the keypad displays the number(s) of the zone(s) that caused the problem, and displays the type of alarm or tr
Résumé du contenu de la page N° 5
ABOUT THE KEYPADS General Your keypads allow you to control all system functions. The keypads feature a telephone style (digital) keys and a Liquid Crystal Display (LCD) which shows the nature and location of all occurrences. The keypads feature a built-in sounder which emits alarm sounds during alarm and trouble conditions, and produces warning tones during entry and exit, delay periods (if so- programmed). The sounder also provides acknowledgment tones when keys are pressed, and confirmation t
Résumé du contenu de la page N° 6
ABOUT THE KEYPADS Fixed-Word Keypad Displays AWAY All burglary zones, interior & perimeter, are armed. NO AC STAY Perimeter burglary zones, such as windows and AWAY CHIME STAY doors are armed. 00 00 00 BAT INSTANT ALARM INSTANT Perimeter burglary zones armed and entry delay is BYPASS CHECK turned off. FIRE NOT READY BYPASS One or more burglary protection zones have been STYLE A bypassed. NOT READY Appears when burglary portion of the system is not ready for arming (due to one or more open NO AC
Résumé du contenu de la page N° 7
ABOUT THE KEYPADS KEYPADS WITH FLIP-DOWN KEY COVERS ARE SHOWN WITH COVER REMOVED ARMED READY OFF AWAY STAY 2 1 3 MAX TEST BYPASS 4 5 6 INSTANT CODE CHIME 7 89 READY 0 # * PANIC 6139 ALPHA KEYPAD AWAY NO AC NO AC AWAY ARMED STAY ARMED CHIME 00 BYPASS INSTANT BAT NOT READY ALARM BYPASS ALARM STAY CHIME BAT CHECK READY READY CHECK INSTANT FIRE NOT READY FIRE OFF AWAY STAY OFF AWAY STAY 2 A 1 3 12 3 MAX TEST BYPASS MAX TEST BYPASS 4 5 6 B 45 6 INSTANT CODE CHIME INSTANT CODE CHIME 7 89 C 7 8 9 R
Résumé du contenu de la page N° 8
FUNCTIONS OF THE KEYPAD 1 DISPLAY WINDOW. Alpha Keypads: A 2-line, 32- 10. CHIME KEY: Turns CHIME mode on and off. When on, the character Liquid Crystal Display (LCD). Displays protection opening of windows or doors while the system is disarmed point identification, system status, and messages. Fixed- will sound 3 beeps at the keypad(s). Word Keypads: Display protection zone ID and system 11. READY KEY: Displays all open protection zones. status messages using pre-designated words (see pa
Résumé du contenu de la page N° 9
1 5 2 3 4 6 ARMED READY OFF 7 A OFF AWAY AWAY STAY STAY A 1 2 3 1 2 3 15 MAX TEST BYPASS 9 B MAX TEST BYPASS 4 5 6 14 B 4 5 6 C INSTANT INSTANT CODE CODE CHIME CHIME SHOWN WITH 10 7 8 9 C 7 89 FLIP-DOWN 16 KEY COVER READY D READY REMOVED 0 # 0 # * 12 * PANIC 17 8 11 13 TYPICAL ALPHA KEYPAD Fixed-Word Keypads are functionally similar, except for screen displays (see page 6). IMPORTANT!: When entering codes and commands, sequential key depressions must be made within 2 seconds of one another. If 2
Résumé du contenu de la page N° 10
SECURITY CODES General At the time of installation, your installer programmed a personal four-digit Master code, known only to you and yours. This code is used to perform most system functions, including arming and disarming of the system. As an additional safety feature, temporary User Codes can be assigned for use by those not having a need to know the Master code. Note that the Master code remains in effect even when other user codes are assigned. IMPORTANT! When performing any of the proced
Résumé du contenu de la page N° 11
SECURITY CODES (Continued) Duress Code To program a Duress code: (Continued) Enter your Master Code + 8 + 8 + [desired 4-digit duress code]. The keypad will beep once. Note: The Duress code must differ from the Master Code or any other User’s Code. To change the Duress code: Enter Master Code + 8 + 8 + [new 4-digit duress code]. To delete the Duress code: Enter your Master Code + 8 + 8, and then stop. When the keypad beeps once it signifies that the code has been deleted. To Change Your Master
Résumé du contenu de la page N° 12
ENTRY/EXIT DELAYS General Information Your system has preset time delays, known as exit delay and entry delay. When you arm your system, exit delay gives you time to leave through the entry/exit door without setting off an alarm. Entry delay gives you time to disarm the system when you re-enter through the entry/exit door. The system must be disarmed, however, before the entry delay period ends, or an alarm will occur. The keypad will beep slowly during the entry de- lay period, reminding you t
Résumé du contenu de la page N° 13
CHECKING FOR OPEN ZONES Using the Before arming your system, all protected doors, windows and other protection zones must be closed or bypassed (see BYPASSING PROTECTION ZONES section), otherwise READY Key the keypad will display a "Not Ready" message, and if your keypad has a READY indicator light, it will not be lit. The READY key can be used to display all faulted zones, making it easier for you to secure any open zone. To display faulted zones, simply press and release the READY [ ] ke
Résumé du contenu de la page N° 14
BYPASSING PROTECTION ZONES Using the This key is used when you want to arm your system with one or more zones intentionally unprotected. The system must be disarmed first. 6 BYPASS Key 1. Enter your security code and press the BYPASS key. LIMITATION 2. Enter the zone number(s) for the zone(s) to be bypassed (e.g., 06, 10, 13, etc.). The system will not Single digit zone numbers must be preceded by a zero (e.g. 05, 06). allow fire zones to 3. When finished, the keypad will momentarily displa
Résumé du contenu de la page N° 15
BYPASSING PROTECTION ZONES (Continued) Quick Bypass If your system supports "Quick Bypass", it allows you to easily bypass all open (faulted) zones without having to enter zone numbers individually. This feature is useful if, for Ask your installer if example, you routinely leave certain windows open when arming at night. "Quick Bypass" is active for your system, and if To use this feature, enter your security code, press the BYPASS key, then stop. In a few so, check here: moments, all open
Résumé du contenu de la page N° 16
ARMING PERIMETER ONLY WITH ENTRY DELAY ON Using the Use this key when staying inside, but expect someone to use an entry/exit door later. 3 STAY Key 1. Enter your security code and press the STAY key. 2. The keypad beeps three times and displays the armed STAY message. The red ARMED indicator lights. Note that there is an exit delay in effect before arming actually BEFORE ARMING, takes place. See the note below. close all doors and windows (see CHECKING FOR OPEN 3. After arming, an alarm s
Résumé du contenu de la page N° 17
ARMING PERIMETER ONLY WITH ENTRY DELAY OFF Use this key when staying inside and do not expect anyone to use an entry/exit door. Using the 7 INSTANT Key 1. Enter your security code and press the INSTANT key. 2. The keypad beeps three times and displays the armed message. The red ARMED indicator lights. Note that there is an exit delay in effect before arming actually takes BEFORE ARMING, place. See the note below. close all doors and windows (see CHECKING FOR OPEN 3. After arming, an alarm sou
Résumé du contenu de la page N° 18
ARMING ALL PROTECTION WITH ENTRY DELAY ON Using the Use this key when no one will be staying inside. 2 AWAY Key 1. Enter your security code and press the AWAY key. 2. The keypad beeps twice and displays the armed message. The red ARMED indicator lights. BEFORE ARMING, close all doors and windows 3. You may leave through an entry/exit door during the exit delay period without causing (see CHECKING FOR OPEN an alarm. ZONES on page 13) After the exit delay expires, the system arms and sounds
Résumé du contenu de la page N° 19
ARMING ALL PROTECTION WITH ENTRY DELAY OFF Using the Use this key when the premises will be vacant for extended periods of time such as vacations, etc., or when retiring for the night and no one will be moving 4 MAXIMUM Key through protected interior areas. 1. Enter your security code and press the MAXIMUM (MAX) key. BEFORE ARMING, close all doors and windows 2. The keypad beeps twice and displays the armed MAXIMUM message. The red (see CHECKING FOR OPEN ARMED indicator lights. ZONES on pa
Résumé du contenu de la page N° 20
DISARMING THE SYSTEM AND SILENCING ALARMS Using the The OFF key is used to disarm the system and to silence alarm and trouble sounds. 1 OFF Key To Disarm the System Enter your security code and press the OFF key. IMPORTANT: The "Ready" message will be displayed, and the keypad will emit a single tone to confirm If you return and the that the system is disarmed. main burglary sounder is To Silence a Burglary Alarm on, DO NOT ENTER, but CONTACT THE POLICE from a SEE IMPORTANT NOTE AT LEFT! n
