Instruction d'utilisation Pelco ENDURA WS5000

Résumé du contenu de la page N° 1

®
™
Endura WS5000
Software Recovery
Instructions
C1677M (7/05)
Video Security System

Résumé du contenu de la page N° 2

® This document describes how to restore the WS5000 software or the Windows XP operating system in the event that either of these becomes corrupted. The procedures contained in this document will restore the WS5000 software and the Windows XP operating system back to their original factory default settings. This document does not include procedures for backing up files or data to alternate storage media. WARNING: Under certain circumstances, all additional files or software inst

Résumé du contenu de la page N° 3

Recovering the WS5000 Software Follow these instructions if Microsoft Windows is still operable on the workstation but the WS5000 software fails to start properly. 1. If you are logged on as a user, close all programs and log out. NOTE: It is not enough to switch users to the WS5050 Administrator. You must log out and then log back on as the WS5050 Administrator. 2. Log on to the WS5050 workstation as the WS5050 Administrator. 3. From the desktop, double-click the WS5050 System Tools

Résumé du contenu de la page N° 4

Recovering the Windows Operating System from the Boot Image You must restart the workstation in Recovery Mode if you want to restore the operating system from the boot image. If Windows will still start but is damaged, you can follow the first set of steps below. If not, you must restart the workstation in Recovery Mode manually by following the second set of steps. WARNING: Recovering Windows XP with this method will remove any files or applications that are currently installed on t

Résumé du contenu de la page N° 5

Recovering the System from a Recovery DVD If the operating system software on the disk drive is so badly damaged that you cannot restore it directly from the drive, follow these instructions to restore the operating system from the recovery DVD you received with the WS5050 workstation. During this process you will be prompted to enter your Windows license number and your WS5050 workstation serial number. The Windows XP license number is located on the back panel of the WS5050 works

Résumé du contenu de la page N° 6

To activate Windows XP for a proxy server: a. From the Windows Start menu, select Control Panel. b. Double-click Internet Options, and then open the Connections tab. c. Under Proxy Server, check the box for “Use a proxy server for your LAN,” and then enter the IP address and port number. Your system administrator can provide you with this information. d. Click OK twice to close the Connections tab and the Internet Options screen. e. Close the Control Panel and return to the Activate Wind

Résumé du contenu de la page N° 7

PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or If a warranty repair is required, the Dealer must contact Pelco at (800) 289-9100 or workmanship for a period of one year after the date of shipment. (559) 292-1981 to obtain a Repair Authorization number (RA), and provide the following information: Exceptions to this warranty are as noted below: 1. Model and serial numb

Résumé du contenu de la page N° 8

Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com ISO9001 United States Canada United Kingdom The Netherlands Singapore Spain Scandinavia France Middle East | | | | | | | |