Résumé du contenu de la page N° 1
Security System 8300
Owner’s Manual
Résumé du contenu de la page N° 2
Sensor List It will Your dealer should fill in this list for you . help you identify all of the sensors in your system. It will also help yo u know, at a glance, how each sensor will react in each of the four Levels of Protection. Off Day r Number/Description Senso Night Away D = Delayed Alarm
Résumé du contenu de la page N° 3
AT&T Security System 8300 Contents ............................................................................................................... Introduction and Safety Introduction Warranty. Checklist ............................................................................................................................. .................................................................................................................. Safety Planning .......................................
Résumé du contenu de la page N° 4
Introduction and Safety Introduction Congratulations on the purchase of your AT&T Components: Security System 8300. Your dealer has demon- strated the correct way to operate your new system. Since each installation is customized to Communication Control Unit (pg. 3) _J suit the individual needs of the customer, there Display Control Keypad (pg. 4) J may be components or features referred to in this -- manual that are not present in your system. Also, Control Keypad (pg. 15) there are different s
Résumé du contenu de la page N° 5
Introduction and Safety l Do not leave children unattended. Safety Planning l Do not overload electrical outlets. If you have installed this system in a building where children or invalids are present, the fire Planning for an Emergency department can provide you with window decals that indicate where to look first in the event of a Contact your local police department, fire depart- fire. ment, doctor, and alarm dealer for advice on handling household emergencies. Ensure that every member of you
Résumé du contenu de la page N° 6
How the System Operates Your AT&T Security System 8300 has been Sensors customized to fit your particular needs. Be sure to refer to the checklist on page 1 if you are uncertain whether your system includes a particular compo- nent or feature. The various sensors monitor the conditions in your building. Depending on your needs, they can be set up to detect entry and exit from the building, motion within the building, and smoke or fire Communication Control Unit (CCU) conditions. They can also mo
Résumé du contenu de la page N° 7
System Programming Display Control Keypad Model 8345 In order to operate your system correctly, you need To Arm The System: to be familiar with the Display Control Keypad. 1 Enter your access code. The keypad will beep Please read this section carefully and keep it each time you press a number. handy as a reference source 2 Press the button for the Level of Protection There can be up to four levels of access codes (Night, Away, o r ) y that you want to set the programmed into your system. In ord
Résumé du contenu de la page N° 8
System Programming To Generate An Instant Emergency Alarm: To Disarm The System: 1 Enter your access code. The keypad will beep Simultaneously, press and hold the two buttons each time you press a number. marked EMERGENCY, until the system beeps. 2 Press OFF. The keypad will beep, the Arm/ This will sound an instant alarm and send a Alarm light will flash for a short time, and the message to your monitoring service that an emer- display will sho w OFF, beneath the date . OF F gency situation ex
Résumé du contenu de la page N° 9
System Programming Display Screen Moving Through the Displays The display presents various menus (or lists) that The display on the Display Control Keypad is the key to your AT&T Security System 8300. The allow you to choose commands or view new menus. You can use the display to move through display contains two types of items: 1 The names of other menus, and the menus and choose the commands that operate the system. 2 Commands for the system. When you select a name, the display will present th
Résumé du contenu de la page N° 10
Access Codes Access Codes are the key to programming your To Review Access system and setting the Level of Protection. When your dealer tells you your Level 1 access code, write it down and store it safely. Start at the Status Menu. NOTE: Do not write your access code in this book or anywhere that an intruder could find it. Do not carry it around in a wallet or pocketbook. With this Level 1 access code, a person can gain access to a list of all other access codes in your system. Press NEXT. Wit
Résumé du contenu de la page N° 11
Access Codes 6 The first access code will appear. It will look To Add Access Codes: something like this. NOTE: When giving someone a temporary code, give information about arming and disarming only. Do not give programming or bypass information. For this reason, do not show the user card to people with temporary access The upper left corner will show the user’s name. After performing steps l-4 on page 7: The access code and level appear on the same line. The length of time for which that code is
Résumé du contenu de la page N° 12
Access Codes The following menu will appear. 9 The following menu will appear. c Enter the name of the user (see page 9 for Enter the code you want to remove and press instructions on entering characters) and press SELECT. The system will acknowledge that the code has 10 The screen showing the information you en- been removed. You may continue to remove tered will appear. It will look something like this: codes, select to return to the Status Menu or select < to return to the previous menu. Ent
Résumé du contenu de la page N° 13
Alarms and Trouble Beeps To Silence Alarms: The System 8300 generates two types of warn- ings: alarms and trouble beeps. When there is an 1 With ALARM flashing in the display, enter your alarm, the display will show ALARM, the alarm will access code. sound, and the red Arm/Alarm light will light. When 2 Press OFF. This will silence the system. there is system trouble, the display will show TROUBLE, the trouble beeps will sound, and the NOTE: Yo u must silence alarms from the Status Menu. If you
Résumé du contenu de la page N° 14
Display Control Keypad Options Phone Options Phone Operation Touch Tone Ability: Your Display Control Keypads can be set, by pulse dialing, you can still use touch tones for your installer, for use as speakerphones. You banking or business applications. If you need do not need an access code to use this feature. touch tones, press B any time after you lift the receiver. Touch tone dialing will remain active until you hang up. To Answer an Incoming Call: If your phone service allows touch tone
Résumé du contenu de la page N° 15
Display Control Keypad Options Date and Time Chime and Tone Your dealer can program your system to sound a The clock shows the date and time on the status screen. It also records the time when events chime or tone when one of your sensors is acti- vated. Tones and Chimes can be set to sound in happen (on the system’s history list) so be sure to keep the date and time set properly. To change any of the Four Levels of Protection. For example, you could have your system chime whenever the the date
Résumé du contenu de la page N° 16
Sensor Bypass Your dealer may have set up your system with the AutoBypass Upon Arming capability to bypass certain sensors (other than fire or tamper sensors) when you arm the system. When you bypass a sensor, the system will ignore any alarms from that sensor. An example of when Available to all users. this would be useful would be when you want to allows the system to bypass all leave a door or window open. priority violated sensors automatically, so you do not have to acknowledge each bypas
Résumé du contenu de la page N° 17
Sensor Bypass Group Bypass Group Bypass enables you to bypass an entire pre-programmed group of sensors. Your installer could include this option if there is a section of the 5 If permanent bypasses are allowed in your building that is used for special occasions. system, the following screen will appear, with To bypass this group of sensors, bypass group ADD flashing: “999” with the permanent bypass described above. Remember to remove the group bypass after the need for it is over. NOTE: Group B
Résumé du contenu de la page N° 18
Optional Components Control Keypad Model 8340 The Control Keypad is similar to the Display Control Keypad. It can arm or disarm the system and generate Police or Emergency Alarms. It can- not, however, be set up as a telephone or intercom. It can not perform any programming Most procedures are performed in the same way as they are on the Display Control Keypad. Since there is no display, you will need to listen to the system sounds (see chart on the User’s Card) and observe the lights on the key
Résumé du contenu de la page N° 19
Optional Components Supervised Smoke Detector Model 8520 The AT&T Supervised Smoke Detector is a photoelectric type, designed to detect a fire in its early stages so that you can escape from your house before smoke reaches a dangerous con- centration level. When the detector senses smoke particles, it simultaneously sounds an alarm (using a built-in siren) and sends an alarm to the Com- munication Control Unit. During normal operation, th e On/Alarm light in the center of the smoke detector flas
Résumé du contenu de la page N° 20
Replacing Smoke Detector Batteries Batteries should be replaced annually or when low. See page 22 for the procedure used to test the transmitter battery power and operation. To Replace Batteries: Dining Room Bedroom To avoid generating a false alarm, you must set your system to the Test mode (see page 22). Remove the smoke detector from the mounting bracket by pressing the black tab on the side marked PRESS. Lift the detector away from PRESS and lift up until the top is free from its hook. Remov
