Résumé du contenu de la page N° 1
MOTOROLA HX550
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Congratulations Your Motorola HX550 Bluetooth® headset delivers everything you need to stay connected including clear calls, hands-free texting, and custom comfort. We’ve crammed all of the main features of your headset into this handy guide, and in a matter of minutes we’ll show you just how easy your headset is to use. So go on, check it out. more information On the web: www.motorola.com/support Caution: Please read the important safety, regulatory and legal information at the back of th
Résumé du contenu de la page N° 4
Your headset the important parts Volume Button (on side) Call Button Status Light Microphone (on side) Micro USB Charging Boom Connector Microphone Ear Earhook Speaker 2 Your headset
Résumé du contenu de la page N° 5
Charge it let’s get you up and running Status Light Red/Yellow = charging Green = fully charged While your headset is charging, you won’t be able to use it. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your headset. Charge it 3
Résumé du contenu de la page N° 6
Basics a few essentials to get you started Turn on & off To turn your headset on and off, flip the boom to the open (extended)/closed (folded) position. Wear it You can optimize the fit of your headset with the on-ear hook, in-ear hook or ear gels with no hook. in-ear hook 1 Rotate and turn your ear hook for left or right use. 4 Basics
Résumé du contenu de la page N° 7
2 Fit in-ear hook onto earpiece. 3 Flex the hook and loop it over your ear, and point the headset microphone towards your mouth. On-ear hook 1 Rotate and turn your ear hook for left or right use. 2 Flex the hook and loop it over your ear, and point the headset microphone towards your mouth. Basics 5
Résumé du contenu de la page N° 8
Ear Gel 1 Remove on-ear hook from headset: 2 Fit the ear gel on the earpiece and place it on your ear by placing the loop in the bend of your ear: 6 Basics
Résumé du contenu de la page N° 9
Pair & connect connect and go Pair & connect with your phone 1 Turn off any Bluetooth devices previously paired with your headset. 2 Turn on the Bluetooth feature on your phone. 3 Turn on your headset (see “Turn on & off” on page 4 for help). 4 Put the headset on your ear (see “Wear it” on page 4 for help). The indicator light becomes steadily lit in blue and you hear “Welcome to the Motorola HX550. Ready to pair”. 5 Follow the voice prompts to connect your phone to your headset. Note:
Résumé du contenu de la page N° 10
Pair & connect a second phone (Optional) 1 Turn off first phone and any other Bluetooth devices previously paired with your headset. 2 Turn your headset off (see “Turn on & off” on page 4 for help). 3 Turn on the Bluetooth feature on your phone. 4 Turn on your headset. 5 Put the headset on your ear. The indicator light becomes steadily lit in blue and you hear “ready to pair”. 6 Follow the voice prompts to connect your phone to your headset. When your headset successfully pairs with you
Résumé du contenu de la page N° 11
Tip: You have 20 seconds to turn on your first phone. If reconnection fails, turn your headset off and on. Test your connection 1 Place the headset on your ear. 2 On one phone, dial the number you want to call and press Call/Send key. Repeat for the second phone. If your phones and headset are successfully connected, you hear ringing on the headset. For daily use, make sure your headset is turned on, and your phone’s Bluetooth feature is on. Your headset and phone will connect automatica
Résumé du contenu de la page N° 12
Calls it’s good to talk Note: Some features and phone/network dependent. To… answer call Say “answer” or press the Call button. reject call Say “ignore” or press and hold a Volume button until you hear an audio tone. make a voice Press the Call button and you hear an dial call audio tone. redial last call Press and hold the Call button until you hear an audio tone. mute or unmute Press and hold both Volume buttons until you hear “mute on” a call or “mute off”. end a call Press the Call b
Résumé du contenu de la page N° 13
Tip: When connected to two phones, follow the voice prompts to perform functions such as voice dial and redial on the desired phone. Enhanced call features Note: These features don’t work for second incoming calls. Voice commands Use your voice to answer or ignore an incoming call: � say “answer” to answer the call � say “ignore” to ignore a call CALLER ID If your phone knows your caller’s number, then you hear “call from ” on an incoming call. Note: Some features are phone/network d
Résumé du contenu de la page N° 14
Talk time check your chat time Press and hold both Volume buttons while not on a call. If light and/or you your remaining talk shows… hear… time is… red “battery level less than 1.5 hours is low” yellow “battery level between 1.5 to 3.5 hours is medium” green “battery level more than 3.5 hours is high” To save battery power, turn off the headset when you don't use it for an extended time. 12 Talk time
Résumé du contenu de la page N° 15
Status light Know your headset if light shows… your headset is… three blue flashes powering on/off steady blue pairing/connect mode rapid blue/purple connection successful flashes quick blue flash incoming/outgoing call on phone 1 quick purple flash incoming/outgoing call on phone 2 slow blue pulse connected (on a call) slow blue flash standby (connected to one phone) slow green flash standby (connected to two phones) slow red flash idle (not connected to a phone) slow purple pulse connected
Résumé du contenu de la page N° 16
Note: After one minute on a call or 20 minutes of inactivity, the light stops flashing to conserve power, but the headset remains on. Closing the boom will also save battery life. 14 Status light
Résumé du contenu de la page N° 17
Settings make some changes Note: Features may vary. Press and hold the Call button while turning on the headset to turn these features on/off: � Reset to factory default Caution: This action erases all pairing information stored in your headset. � Caller ID � Voice prompts � Multipoint (two phone) connections � WBS (Wide-band Audio) on/off Follow the voice prompts to make changes to these settings. Note: Some features are phone/network dependent. Settings 15
Résumé du contenu de la page N° 18
Problems? we’ve got solutions My headset will not enter pairing mode. Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then turn the headset off and on. The indicator light becomes steadily lit in blue and you hear “ready to pair”. My phone doesn't find my headset when searching. Make sure the indicator light on your headset is steadily lit in blue when your phone is searching for devic
Résumé du contenu de la page N° 19
turned off or was turned on only temporarily, you may need to restart the Bluetooth feature and pair your phone and headset again. See “Pair & connect” on page 7. Problems? 17
Résumé du contenu de la page N° 20
Support we’re here to help If you have questions or need assistance, go to www.motorola.com/bluetoothsupport or www.motorola.pairxusa.com, or contact us at 1-877-MOTOBLU. You can also contact the Motorola Customer Support Center at: 1-800-331-6456 (United States), 1-888-390-6456 (TTY/TDD United States for hearing impaired), or 1-800-461-4575 (Canada). 18 Support
