Instruction d'utilisation Jabra 100-91130000-02

Résumé du contenu de la page N° 1

NON-BT
IMPORTANT
READTHISFIRST
TM
JABRA FreeSpeak QUICK START GUIDE
For Nextel Phones
Model #:100-91030000-02
Model #:100-91130000-02
Model #:100-91430000-02
Headset Indicator Light
(Blue LED)
Multi-Function Button
MiniGel™
Volume Control Button
BEFORE USING YOUR HEADSET
Charge FreeSpeak – FreeSpeak is rechargeable and must be charged before use.
1. Insert the headset fully into its multi-adapter.
2. Plug one end of the AC power adapter into the multi-adapter and the other end into an
electric

Résumé du contenu de la page N° 2

BASIC OPERATIONS Turn headset on/off – Press the multi-function button for 3 to 5 seconds until you see a burst of flashes on the blue indicator light, then release. The indicator lights on the headset and multi-adapter will flash every 3 seconds while the power is on and in “Standby” mode. If you are already wearing the headset, you’ll hear a quick series of FOUR tones when turning the headset on or off. When turning on, their pitch will be low to high, and when turning off, their pitc

Résumé du contenu de la page N° 3

To answer and end calls with only the headset: Some phones enable you to answer or end a call by pressing and releasing without having to touch the phone. For all Nextel phone models (except the i1000), the phone’s Automatic Answer feature needs to be activated for this headset feature to work. For the BlackBerry 6510, FreeSpeak's Anwer/End feature has to be turned on. To turn on FreeSpeak's Answer/End feature: 1) Ensure that the AC power adapter is not connected. 2) Put the headset

Résumé du contenu de la page N° 4

TIPS & SOLUTIONS To prolong battery life: • After you’ve ended a call using your phone’s keypad, always remember to place the headset in Standby mode by pressing and releasing when not in use. • Dock the headset firmly in its multi-adapter when not in use. If you press and release and the headset stays in Standby mode: If FreeSpeak becomes unpaired, it will not respond to the button. In rare cases, this may occur when you first receive the product or when you hold

Résumé du contenu de la page N° 5

If the headset is not responding or the light will not turn off after pairing - You may need to reset your headset. 1. Plug one end of the AC power adapter into the multi-adapter and the other end into an electrical wall outlet. 2. Insert the headset into the multi-adapter for about 3 seconds, then remove. To improve audio clarity: Stay within 30 feet (10 meters) of your multi-adapter. In general, you will get the best perform- ance when there are no obstructions (including parts of the body) be