Résumé du contenu de la page N° 1
Operators Manual
IT IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER
SAFETY AT ALL TIMES, AND IT IS IMPERATIVE THAT THE DETAILS SET
OUT IN THIS MANUAL ARE FOLLOWED PRECISELY,
Part No. 90500089
Résumé du contenu de la page N° 2
© 1996 NAMCO LIMITED. all rights reserved. No part of this publication may be reproduced by any mechanical, photographic or electronic process, or in the form of phonographic recording, nor may it be stored in a retrieval system, transmitted or otherwise copied for public or private use, without permission from NAMCO EUROPE LIMITED While the information contained in this manual is given in good faith and was accurate at the time of publication, NAMCO EUROPE LIMITED reserve the right to make chan
Résumé du contenu de la page N° 3
SAFETY WARNING In order to use this machine safely, be sure to read this Installation and commissioning manual carefully before installation, adjustment or use of this machine. Whenever the owner of this machine entrusts disassembly, installation, adjustment or routine maintenance to another person, the owner should ensure that that person read the appropriate precautions and relevant sections of this manual before starting work. In order that no accidents occur when the machine is in operation,
Résumé du contenu de la page N° 4
Contents Operators Manual .........................................................................................................................1 SAFETY WARNING......................................................................................................................3 1. SPECIFICATIONS ..................................................................................... 5 2. HOW TO PLAY .......................................................................................... 6 3.
Résumé du contenu de la page N° 5
1. SPECIFICATIONS POWER SUPPLY:- 230volts AC MONITOR:- Thomson 52” Projector Monitor (RP52) COIN ACCEPTOR:- Mars CashFlow - 1 Channel DIMENSIONS:- Assembled 1250(w) x 2430(d) x 2320(h) Monitor Cabinet 1250(w) x 645(d) x 1940(h) Cycle Assembly 980 (w) x 1785(d) x 1380(h) Header Assembly 1145(w) x 350(d) x 380(h) WEIGHT:- Assembled 411kg Monitor Cabinet 200kg Cycle Assembly 193kg Header Assembly 18kg ACCESSORIES:- Keys: (Cash Door) .......................................... 2 (Coin Door) .........
Résumé du contenu de la page N° 6
2. HOW TO PLAY This is a new flight game in which the player gains points by riding a human- powered propcycle and flying freely in the sky. The player flies the propcycle and gains points by hitting and popping floating red balloons. (1) Operation The game is operated by using the handlebars and pedals. Handle: - Handle Backward = Climb : The cycle gains altitude but loses speed. - Handle Forward = Drop : The cycle loses altitude but gains speed. - Handle Left = Turn Left. - Handle Right = Turn
Résumé du contenu de la page N° 7
3. MAJOR COMPONENTS Page 7
Résumé du contenu de la page N° 8
4. INSTALLATION Notes on Installation DANGER NEVER turn the power to the machine ON until installation has been completed. DANGER In order to avoid injury or damage to the machine due to mis- operation, ensure that the voltage of the mains supply is 230volts AC. Also, in order to prevent possible electric shocks, be sure that the machine is connected to the mains supply with a securely connected earthed plug. WARNING If the location site of this machine has a polished floor it is recommended tha
Résumé du contenu de la page N° 9
WARNING This machine is designed for indoor use only. The game must not be installed outdoors or under the following conditions:- a. In areas directly exposed to sunlight, high humidity, direct water contact, dust, high heat or extreme cold. b. In locations that would present an obstacle in the case of an emergency, i.e. near fire equipment or emergency exits. c. On an unstable or uneven surface, or subject to floor vibration. 4-1 Fitting the Header Assembly The Header Assembly has a forward cen
Résumé du contenu de la page N° 10
4-2 Connecting the Cycle Assy to the Monitor Cabinet 1, Connect the connectors between the Cycle Assembly And the Monitor Cabinet. 2. Remove 2off Hex Head Set Screws (M8x25), Spring and Flat Washers on each Joint Bracket, turn the Bracket over and refit, finger tight, using the same screws and washers. 3. Push the Cycle Assembly fully up to the Monitor Cabinet, taking care not to trap any wires. 4 Fit the Joint Brackets, finger tight, to the Monitor Cabinet using 2off Hex Head Set Screws (M8x25)
Résumé du contenu de la page N° 11
4-3 Removing the Shipping Bracket 1. Remove the two Hex Head Set Screws (M8x16) retaining the shipping bracket to the Cycle Base. 2. Remove the two Hex Head Set Screws (M12x20) retaining the shipping bracket to the Cycle Assembly. 3. Remove the shipping bracket. (Ensure that the bracket and the M8 screws and washers are retained safely for refitting if the machine is moved or transported in the future.) 4. Refit the two Hex Head Screws (M12x20) with washers to the Cycle Assembly and tighten full
Résumé du contenu de la page N° 12
5. ADJUSTMENTS 5-1 Turning on the Power After the machine has been installed, turn ON the power. The Power switch is located on the rear of the Main cabinet. (See section 3 “Major Components” (page 3).) 5-2 Adjustment Switches The adjustment switches are located inside the coin door. 1. Service Switch Press this switch to obtain game credits without incrementing the play meters. 2. Test Switch Slide this switch “ON” to enter test mode. Test mode allows game testing and the changing of game setti
Résumé du contenu de la page N° 13
5-3 Test Mode 1. Open the coin door and slide the test switch “ON”. The “Menu Screen” will be displayed on the monitor. 2. Select the test required by moving the handle bars up or down. The colour of the selected test will change. 3. Enter the selected test by pressing the start button. Select “EXIT” to return to the “Menu Screen” 4. After testing is completed, ensure that the test switch is returned to the “OFF” position to return to game mode. The Test Switch must always be in the “OFF” positi
Résumé du contenu de la page N° 14
5-3-1 Coin Options a. Select item (1) “COIN OPTIONS” on the menu screen, to set the game cost and related settings. b. Move the handle bars up or down to select the required item then press the start button. c. Move the handle bars left or right to change the settings then press the start button to store the new values. d. Select “EXIT” and press the start button to return to the menu screen. Note:- The price of play on this machine is set within the Cashflow Coin Mech. Ensure that the Coin Opti
Résumé du contenu de la page N° 15
5-3-2 Game Options a. Select item (2) “GAME OPTIONS” on the menu screen to set the game options. b. Move the handle bars up or down to select the required item then press the start button. c. Move the handle bars left or right to change the settings then press the start button to store the new values. d. Select “EXIT” and press the start button to return to the menu screen. GAME OPTIONS [DEFAULT IN GREEN] DIFFICULTY B ............................. (a) CONTINUE TIME B ...........................
Résumé du contenu de la page N° 16
5-3-3 I/O Test a. Select item (3) “I/O TEST” on the menu screen. b. Move the handle bars up or down to select the required item then press the start button. c. Move the handle bars left or right to change the settings then press the start button to store the new values. d. Select “EXIT” and press the start button to return to the menu screen I/O TEST DIP 12345678 .................................... (a) SWITCH .................................... (b) PEDAL .................................... (c
Résumé du contenu de la page N° 17
5-3-3-1 Switch Test a. Select “SWITCH” on the menu screen and press the start button. The following screen is displayed. I/O TEST DIP 12345678 SWITCH UP / DOWN : 0000 ................................... (a) RIGHT / LEFT : 0000 ................................... (b) START : OFF ................................... (c) COIN : OFF ................................... (d) SERVICE : OFF ................................... (e) TO EXIT : PUSH START AND HANDLEBARS UP (a) Handle Bar up/down: When the hand
Résumé du contenu de la page N° 18
5-3-3-2 Pedal Test a. Select “PEDAL” on the menu screen and press the start button. The following screen is displayed. I/O TEST DIP 12345678 SWITCH PEDAL PEDAL 7FBF .................... (a) READY } PRESS START .................... (b) TO EXIT : PUSH START AND HANDLEBARS UP (a) Pedal rotation When the pedals are rotated in the forward direction the value increases, and when they are rotated in the backward direction the value decreases. (b) Rotation sensor check This mode checks whether the senso
Résumé du contenu de la page N° 19
e. When the start button has been pressed, the following screen is displayed. I/O TEST DIP 12345678 SWITCH PEDAL PEDAL C5CF END OK RETRY : PRESS START TO EXIT : PUSH START AND HANDLEBARS UP f. If “OK” is displayed the pedals are correct. If “NG” is displayed there has been a problem in reading the pedal rotation. Press start and repeat steps c) and d) again. If “NG” is still displayed after repeating the test, there is the possibility that the sensor board or sensor sticker is faulty. g. Press t
Résumé du contenu de la page N° 20
5-3-3-4 Lamp Test a. Select “LAMP” on the menu screen and press the start button. The following screen is displayed. I/O TEST DIP 12345678 SWITCH PEDAL MOTOR LAMP BUTTON OFF EXIT START : ENTER UP/DOWN : CHOOSE b. When the start button is pressed once, ‘OFF’ changes to ‘ON’ and the start button lamp turns ON. When the start button is pressed again, ‘ON’ changes to ‘OFF’ and the start button lamp turns OFF. c. Select “EXIT” and press the start button to return to the “I/O Test” screen. 5-3-4 Monit
