Résumé du contenu de la page N° 1
NA VMAN
English 1-3
Deutsch 2-1
Francaise 3-1
Italiano 4-1
Espana 5-1
Português 6-1
M300 1-1
Résumé du contenu de la page N° 2
NA VMAN M300 1-2
Résumé du contenu de la page N° 3
M300 – English NA VMAN M300 USER GUIDE English M300 1-3
Résumé du contenu de la page N° 4
Welcome NA VMAN Welcome Navman’s 300 series GPS Sport.Tools provide an affordable and reliable way to track and store a variety of personal performance indicators. Please read this guide carefully and familiarize yourself with the interface and functions, as well as the intended use and limitations of the Navman M300 GPS Sport.Tool. This product complies with CE, FCC, Canada 210, and C-Tick regulations. Operation is subject to the following two conditions: (1) this device may not cause in
Résumé du contenu de la page N° 5
M300 - Content NA VMAN Content 1.0 General information 1-6 1.1 Checklist 1-6 1.2 Care and maintenance 1-6 1.3 Water resistance 1-6 1.4 Changing the battery 1-7 2.0 Navman M300 interface 1-8 2.1 Button functions 1-8 2.2 Display screen 1-8 3.0 Getting started 1-9 3.1 Be outdoors 1-9 3.2 Fit the M300 1-9 3.3 Startup 1-9 3.3.1 Enter setup 1-10 3.3.2 Start normal operation 1-10 4.0 Setup 1-11 4.1 Setting options 1-11 4.1.1 Set time format 1-12 4.1.2 Set date format 1-12 4.1.3 Beep 1-13 4.1.4 Set spee
Résumé du contenu de la page N° 6
M300 – General information NA VMAN 1.0 General information 1.1 Checklist The M300 package should contain the following items: • Navman M300 GPS Sport.Tool • armband • quick guide • user guide • 1 x AA battery • registration card 1.2 Care and maintenance Do not attempt to disassemble the M300; there are no user serviceable components in this product. The M300 is of robust design. However, care should be taken to protect from shocks or extreme heat. Clean using only a soft cloth with mild soap
Résumé du contenu de la page N° 7
M300 - General information NA VMAN 1.4 Changing the battery Always shut down the M300 before changing the battery. Note: All system settings, and the calculated data that was stored at the last controlled shutdown*, are retained when the battery is removed. This information persists indefinitely until updated or reset. 1. Turn D-ring anti-clockwise and slide enclosure cover down to open battery enclosure. 2. Insert battery with « » end as indicated inside enclosure. 3. Replace enclosure cover
Résumé du contenu de la page N° 8
M300 - Interface NA VMAN 2.0 Navman M300 interface 2.1 Button functions There are two control buttons, and . These buttons are pressed separately or together to turn the unit on and off, cycle through modes, and select mode options. Throughout this guide the button icons are used as follows: = press this button = press this button = press both buttons together Note: where it is required to press and HOLD buttons, a countdown begins. To perform the required action continue to hold until
Résumé du contenu de la page N° 9
M300 - Getting started NA VMAN 3.0 Getting started 3.1 Be outdoors The M300 is not intended for operation indoors or under water as it uses Global Positioning System (GPS) satellites to get time and date information, and to calculate distance and speed. For best results, always use the M300 outdoors with an unobstructed view of the sky. 3.2 Fit the M300 The M300 is designed to be worn on the left upper arm. The easiest way to fit the unit is to feed the strap through the fastener to create
Résumé du contenu de la page N° 10
M300 - Getting started NA VMAN 3.3.1 Enter setup To enter setup Press and hold to turn the power on and enter setup. counter When the counter reaches zero, the M300 will enter setup. If you release before the counter reaches zero the M300 will immediately start normal operation. Note: To enter setup after starting normal operation you will need to restart the M300. For details about changing settings see Section 4.0. To leave setup Press and hold to leave setup and start normal operation
Résumé du contenu de la page N° 11
M300 - Setup NA VMAN 4.0 Setup 4.1 Setting options Press and hold to turn the power on and enter setup. Press repeatedly to step through the setting options. Setting options are accessed in the order shown below. See subsequent sections for details about editing settings. Set (12hr) Set (31-12) Beep Set offset Set units (knots) Set (12hr) lets you set 12hr or 24hr time format Set (31-12) lets you set dd-mm or mm-dd date format Beep When beep is ON a beep will sound when the buttons are pushe
Résumé du contenu de la page N° 12
M300 - Setup NA VMAN 4.1.1 Set time format Set 12hr or 24hr time display format. time format SYSTEM SET To access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To set time format 1) Press to start editing (time format option flashes). 2) Press or to select 12hr or 24hr. 3) Press to stop editing. 4) Press to go to the next option, or hold to leave setup. 4.1.2 Set date format Set ‘dd-mm’ or ‘mm-dd
Résumé du contenu de la page N° 13
M300 - Setup NA VMAN 4.1.3 Beep Set beep ON or beep OFF. When beep is ON, an audible ‘beep’ will sound when buttons are pressed. status SYSTEM SET Access this option If necessary, press and hold to turn the power on and enter setup. Press repeatedly until the screen appears as shown above. To set button beep status 1) Press to start editing (setting status flashes). 2) Press or to select On or OFF. 3) Press to stop editing. 4) Press to go to the next option, or hold to leave setup. 4.1
Résumé du contenu de la page N° 14
M300 - Setup NA VMAN 4.1.5 Set offset (set local time) This option lets you adjust the M300 to display local time*. You only need to do this once, unless operating the unit in a new time zone. (* By default the M300 displays GPS time. The M300 will perform all functions accurately without adjusting the offset to display your local time.) Note: If you attempt to change the time offset before all GPS data are obtained, the screen displays ‘no GPS’ and the antenna icon flashes until all GPS da
Résumé du contenu de la page N° 15
M300 - Setup NA VMAN 4.1.6 Editing settings (overview) settings editing details edit accept set 12hr set (12hr) set (12hr) set 24hr edit accept set 31-12 set (31-12) set (31-12) set 12-31 edit accept beep ON beep beep beep OFF set units (knots) edit accept set units (knots) set units (knots) set units (km/h) set units (mph) � � accept edit set offset time (date) KEY = press this button = press this button = press both buttons together M300 1-15
Résumé du contenu de la page N° 16
M300 - Normal operation NA VMAN 5.0 Normal operation 5.1 Modes Press to turn the power on and start normal operation. Press repeatedly to step through the modes (press and hold to cycle through the modes quickly). Modes are accessed in the order shown below. See subsequent sections for details about using different modes. 2 MAX 8 7 AVG 3 Speed Speed AVG Speed MAX Odometer Timer RCL Timer Clock Heading N S RCL Speed mode shows distance and speed Speed (AVG) mode shows distance and average sp
Résumé du contenu de la page N° 17
M300 - Normal operation NA VMAN 5.1.1 Speed mode This mode lets you monitor session distance and current speed. current speed session distance nmi knots To access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Speed mode • Press to store current lap data (the screen briefly shows the lap distance, lap number, and lap time that is being stored). • Press and hold to clear all* session data. (*D
Résumé du contenu de la page N° 18
M300 - Normal operation NA VMAN 5.1.3 Speed (Maximum) mode This mode lets you monitor session distance and maximum speed. session distance maximum speed nmi knots MAX Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Speed (maximum) mode • Press to store current lap data (the screen briefly shows the lap distance, lap number, and lap time that is being stored). • Press and hold to clear
Résumé du contenu de la page N° 19
M300 - Normal operation NA VMAN 5.1.5 Heading mode This mode shows the current heading in degrees from true North. current heading N S Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Heading mode • Press to store current lap data (the screen briefly shows the lap distance, lap number, and lap time that is being stored). • Press to go to the next mode. M300 1-19
Résumé du contenu de la page N° 20
M300 - Normal operation NA VMAN 5.1.6 Clock mode Clock mode shows the current time and date. (Time is only displayed while GPS satellite signals are available. By default, GPS time is displayed. See section 4.1.5 for instructions on setting local time.) current time current date PM Access this mode If necessary, press to turn the power on and start normal operation. Press repeatedly until the screen appears as shown above. While in Clock mode • Press to store current lap data (the screen
