Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
C Your Local Agent/Dealer 9- 52, A s hi har a- c ho, Nishinomiya, Japan Telephone: 0798-65-2111 Telefax: 0798-65-4200 FIRST EDITION : APR. 1997 All rights reserved. Printed in Japan K : MAR. 1, 2001 PUB. No. OME-43840 GP-30/35 (TATA )
Résumé du contenu de la page N° 3
SAFETY INSTRUCTIONS Safety Instructions for the Operator WARNING WARNING Do not open the equipment. Keep heater away from equipment. Only qualified personnel should A heater can melt the equipment’s power work inside the equipment. cord, which can cause fire or electrical shock. Immediately turn off the power at the switchboard if water leaks into the Use the proper fuse. equipment or something is dropped in the equipment. Fuse rating is shown on the equipment. Use of a wrong fuse can result in
Résumé du contenu de la page N° 4
Safety Instructions for the Installer CAUTION WARNING Do not open the cover unless totally Ground the equipment to familiar with electrical circuits and prevent mutual interference. service manual. Improper handling can result in electrical Observe the following compass safe shock. distances: Turn off the power at the switchboard Standard Steering before beginning the installation. Display 0.9 m 0.7 m unit Fire or electrical shock can result if the power is left on. Do not install th
Résumé du contenu de la page N° 5
TABLE OF CONTENTS FOREWORD ......................................v 5. SETTING, CANCELLING DESTINATION 5.1 Setting Destination by Cursor ........ 5-1 5.2 Setting Destination by Waypoint ... 5-1 1. OPERATIONAL 5.3 Setting Route as Destination .......... 5-2 OVERVIEW 5.4 Canceling Destination .................... 5-2 1.1 System Configuration .................... 1-1 1.2 Control Description ....................... 1-2 1.3 Turning On and Off the Power....... 1-3 6. ALARMS 1.4 Adjusting Displa
Résumé du contenu de la page N° 6
9. INSTALLATION 9.1 Installation of Display Unit............ 9-1 9.2 Installation of Antenna Unit........... 9-1 9.3 Wiring ............................................ 9-2 9.4 Initial Settings ................................ 9-3 APPENDIX SPECIFICATIONS ............................. A-1 EQUIPMENT LISTS.......................... A-3 GEODETIC CHART LIST................. A-4 DGPS REFERENCE STATIONS ....... A-5 LORAN C CHAINS ..........................A-11 DECCA CHAINS .............................
Résumé du contenu de la page N° 7
FOREWORD A Word to GP-30/35 Owners Features Congratulations on your choice of the The GP-30/35 GPS Navigator is a totally FURUNO GP-30/35 GPS Navigator. We are integrated GPS receiver and video plotter, confident you will see why the FURUNO and consists of a display unit and an antenna name has become synonymous with quality unit. The high sensitivity receiver tracks up and reliability. to eight satellites simultaneously. An 8-state Kalman filter ensures optimum accuracy in For over 40 years FUR
Résumé du contenu de la page N° 8
Résumé du contenu de la page N° 9
1.2 Control Description Cursor Pad • Shifts cursor and display. • Selects items on menus. One pressing: Zoom, centering. MENU ENT Registers items on menus. Two pressings: Opens menu. Selects display mode. GOTO DISP Sets/cancels destination. MARK Inscribes mark, MOB mark MOB on the display. DIM Long press: Turns power PWR on/off. Touch and release: Opens the display for adjustment of dimmer and contrast. Figure 1-2 Control panel 1-2
Résumé du contenu de la page N° 10
Turning off the power 1.3 Turning On and Off the Power Press and hold down the [DIM/PWR] key until the screen goes blank. Turning on the power Press and hold down the [DIM/PWR] key. The unit beeps and then starts up with the 1.4 Adjusting Display Dimmer last-used display mode. and Contrast The GP-30/35 takes about two minutes to 1. Press the [DIM/PWR] key. The display find its position when turned on for the very shown in Figure 1-3 appears. first time. This is because the default po
Résumé du contenu de la page N° 11
1.5 Display Modes The GP-30/35 has four display modes: Plotter Display, Highway Display, Steering Display, and Nav Data Display. Press the [DISP] key to select a display mode. Each time the key is pressed, the display mode changes in the sequence shown below. 2D n [ 5 ] m x CSE: X 7° DISP key SPD: DISP key k 0.0 t 34°44.000N 135°21.000E [Plotter Display] 2D 12—DEC—97 15:37:40 BRG ---° 34° 44. 000’ N CSE 7° 135° 21. 000’ E n N RNG --- m 0.5 0.5 k n CSE: XTE:
Résumé du contenu de la page N° 12
Résumé du contenu de la page N° 13
Steering Display The steering display provides steering information such as range, bearing and ETA to desti- nation, course, and speed. Receiver status Bearing reference (magnetic) Time 04:32 Bearing from own ship CURSOR 2D MAG to destination W 300 330 N 30 60 E Bearing scale I I I I I I I I I I I I I Own ship mark Speed SPD: kt 12.5 CSE: Course 354° Range from own ship to 9.0 Bearing nm 60° RNG: BRG: destination ETA: TTG:
Résumé du contenu de la page N° 14
5. Press s or t to select option desired. 1.6 Basic Menu Operation 6. Press the [ENT] key. Most operations of the GP-30/35 are carried 7. Press the [MENU] key twice to finish. out through the menu. Below is a quick in- troduction to how to select a menu and change menu settings. If you get lost in op- How to enter numeric, character data eration, press the [MENU] key to return to In some instances it is necessary to enter nu- the MAIN MENU. A complete menu tree appears on page A-12. meric or cha
Résumé du contenu de la page N° 15
9. Press s or t to display 6. 4. Press the [ENT] key. 10.Press s to send the cursor to the next 5. Select ON and press the [ENT] key. digit. 6. Press the [ENT] key, enter speed to use 11.Press s or t to display 3. for the simulation with the Cursor Pad, and press the [ENT] key. 12.Press s to send the cursor to the last digit. 7. Press the [ENT] key. 13.Press s or t to display 0. 8. Select course entry method (AUTO or MANU) and press the [ENT] key. For 14.Press the [ENT] key. manual entry of cour
Résumé du contenu de la page N° 16
2. PLOTTER DISPLAY OVERVIEW 2.1 Enlarging/Shrinking the 2.2 Shifting the Cursor Display Operate the Cursor Pad to shift the cursor. The cursor moves in the direction of the ar- You may enlarge and shrink the display on row or diagonal pressed on the Cursor Pad. the Plotter and Highway displays. The hori- zontal range in the Plotter display is avail- able among 0.2, 0.5, 1, 2, 5, 10, 20, 40, 80, Cursor state and data 160 and 320 nautical miles. The horizontal Cursor state determines what da
Résumé du contenu de la page N° 17
Own ship’s position 2.5 Changing Track Plotting (Blinking) Interval, Stopping Plotting Course of Track 2D In drawing track, first the ship’s position (fed n [ 40 ] m from the GPS receiver) is stored into the CSE: memory at an interval of distance or auto- 7° matic recording. For distance, a shorter in- SPD: terval provides better reconstruction of the k 9.0 t track, but the storage time of the track is re- 34°44.000N 135°21.000E duced. When the track memory becomes full, the o
Résumé du contenu de la page N° 18
4. The cursor should be on the TRACK 2.6 Erasing Track REC line. Press the [ENT] key. The track recording method selection window ap- All track can be erased. Track cannot be re- pears. stored once erased. Be absolutely sure you want to erase all track. OFF 1. Press the [MENU] key twice. DISTANCE 2. Select ERASE and press the [ENT] key. AUTO The ERASE menu appears. Figure 2-7 Track recording ERASE method selection window WAYPOINTS/MARKS? 5. Select OFF, DISTANCE or AUTO and ROUTES? then press the
Résumé du contenu de la page N° 19
3. WAYPOINTS (MARKS) c) Press s to move the cursor to the next 3.1 Entering Waypoints column and press s or t to display B. In navigation terminology a waypoint is a particular location on a voyage whether it d) Press s to move the cursor to the next column and press s or t to display be a starting, intermediate or destination E. waypoint. The GP-30/35 can store 350 waypoints. Waypoints can be entered on the e) Press the [ENT] key. The following Plotter display four ways: window appears. • By cu
Résumé du contenu de la page N° 20
f) Enter a comment (max. sixteen char- Entering a waypoint through the acters) with the Cursor Pad and press menu the [ENT] key. To create a space se- 1. Press the [MENU] key twice. lect “blank” character. To remove all characters which follow the cursor, 2. Select WAYPOINTS. select the underline. 3. Press the [ENT] key. The WYPTS/ g) Press the [ENT] key. MARKS menu appears. h) Press the [ENT] key again to finish. WYPTS/MARKS Entering a waypoint at own ship’s [NEW?] CURSOR MOB
