Instruction d'utilisation Land Pride STEERING DAMPENER UPDATE KIT 356-139A

Résumé du contenu de la page N° 1

Steering Dampener Replacement Kit
Part Number 356-139A
Accu-Z Riding Mowers Manual No. 356-140M
1. Park unit on level ground, remove ignition key and
Before You Start
disconnect negative battery cable.
2. Locate and remove return spring assembly (A) from
When you see this symbol, the subsequent
pump lever (B) and the spring mount (C). Discard
instructions and warnings are serious - follow
!
these parts as they are no longer necessary.
without exception. Your life and the lives of
others depend o

Résumé du contenu de la page N° 2

Land Pride Assembly Instructions Refer to Figure 3: 6. Place control lever in neutral position. 7. Loosen the steering dampeners front ball stud (A). 8. Pull dampener spring housing (B) pass the point that the internal spring is engaged. 9. Release dampener spring housing (B) and allow the internal spring to bring the housing back to the neutral position. 10. Tighten nut (C) on the steering dampeners front ball stud (A). NOTE: The dampener must not bottom out when the pump lever is fully stroked

Résumé du contenu de la page N° 3

Land Pride Listing of Parts Kit No. 356-139A STEERING DAMPENER UPDATE KIT Qty. Part No. Part Description 2 839-216C CENTERING DAMPENER (See item G below) 22458 Figure 4 A - Return spring assembly C - Spring mount E - Clamp B - Pump lever G - Steering dampener - new F - Dampener ball stud D - Steering dampener - old 2/28/05 Manual No. 356-140M 3

Résumé du contenu de la page N° 4

Corporate Office: P.O. Box 5060 Salina, Kansas 67402-5060 USA www.landpride.com