Instruction d'utilisation Linak MEDLINE LA32

Résumé du contenu de la page N° 1

PRODUCT DATA SHEET
ACTUATOR
LA32
Features:
� 24 V DC permanent magnet motor
� Thrust up to 6000 N (with ball screw)
� Stainless steel piston rod
� High-strength plastic housing protects motor
and gears
� Elegant and compact design with small
installation dimensions
� Protection class: IPX1
� Colour: black
� 2250 mm straight cable with 6.3 mm jack plug
� Low noise level: 46 dB (A); measuring method
DS/EN ISO 3746, actuator not loaded
� LA32K with ball screw and double-acting brake
(i.e.

Résumé du contenu de la page N° 2

Precautions: � As there is friction in the spindle/gear system, a load of 800 N is necessary to start the lowering function with LA32F. The actuator will use up to 3.5 Amp. in inward direction unloaded due to a brake system that is fitted as standard on all types of LA32F. � Release of the QR is only possible with a Bowden cable release force 25-60 N. � The piston rod eyes are “crimped” in place and cannot be screwed loose Protective cap “Crimped” piston rod eye Piston rod without eye � Piston

Résumé du contenu de la page N° 3

Dimension +0.1 30 Ø10.1 0 +0.2 Ø10.1 0 11 51 24.5 13 204 30 S S + 173 28 +0.2 Ø12.1 0 18 36 LINAK A/S 01 02 05 06 LA32001B Installation dimensions: S + 173: (with/without safety nut) (Min. install dim. 273 mm) S + 181: (LA323. with/without safety nut) S + 184: with splines S + 198: with splines and safety nut S + 210: LA32K, LA32KAS, LA32 with safety nut S + 215: with brake 3D view of the back fi xture. S + 267: LA32KSM (here type “01” is shown. Drawing no.: 0321200 LA32 with

Résumé du contenu de la page N° 4

Technical specifications: Type Push 321xxx+00xxx4xx 322xxx+00xxx4xx 3000 (2000N) (2000N) 13.6/8.5 4.5 322xxx+40xxx4xx 3000 3000 32Kxxx+x0xxx4xx 32Kxxx+10xxx4xx 32Kxxx+30xxx4xx # # 328xxF+x0xxx4xx 15/6.5 9.5 7500 32Kxxx+30xxx3xx (7500N) (7500N) The above measurements are made in connection with a CB12, the LA32JKSM with a CBJ1 high speed. P = Stroke lengths where potentiometer is possible as standard * LINAK control boxes are designed so that they will short-circuit the motor terminals (poles)