Résumé du contenu de la page N° 1
Gas Barbecue
Use, Care & Assembly Manual
With Grill Lighting Instructions
Model 9947A726
ASSEMBLER/INSTALLER:
Leave these instructions with the consumer.
CONSUMER/USER:
Read all instructions and keep in a safe place for future reference.
For Outdoor Use Only
IMPORTANT
Read this manual carefully before assembling,
using or servicing this grill. Keep this manual for
future reference. If you have questions about
assembly, operation, servicing or repair of this CERTIFIED
®®
grill, please call Colema
Résumé du contenu de la page N° 2
Contents WARNING General Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IF YOU SMELL GAS: General Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. Shut off gas to the appliance. Electrical Attachments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Extinguish any open flame. 3. Open lid. LP Fuel Connections Other Than Portable L.P. Cylinders . . . . . . . . .
Résumé du contenu de la page N° 3
3 1 2 General Safety Information (cont.) 4 7 24" 8 5 6 General Installation Installation must conform with local codes or, in the absence of local 9 codes, with either the National Fuel Gas Code, ANSI Z223.1 (USA), Clear CAN/CGA-B149.1, Natural Gas Installation Code or CAN/CGA-B149.2, Propane Installation Code (Canada). To check local codes, see your local L.P. gas dealer or natural gas company listed in the Yellow Pages for recommended installation pro- cedures and regulations. 24" 24" (
Résumé du contenu de la page N° 4
Electrical Attachments Natural Gas Connections When using an electric attachment with grill, follow specification WARNING and warning statements accompanying the attachment. IMPORTANT: If using an external electrical source, the installed Gas supply system must be installed in accordance with the U.S. appliance must be electrically grounded according to local codes National Fuel Gas Code. or, in the absence of local codes, with the National Electrical This appliance and its individual shut o
Résumé du contenu de la page N° 5
Portable L.P. Gas Barbecue Cylinders (cont.) Portable L.P. Gas Barbecue Cylinders (cont.) DANGER CAUTION DO NOT insert any foreign objects into the valve outlet. Have the gas dealer weigh cylinder after filling to ensure that You may damage the valve. A damaged valve can cause the cylinder is not overfilled. a leak, which could result in explosion, fire, severe per- sonal injury or death. Hose and Regulator WARNING The Type 1 connection system has the following features: Cylinders must be s
Résumé du contenu de la page N° 6
Transporting the Cylinder (cont.) Filling and Purging Type 1 L.P. Gas Cylinders (cont.) WARNING 13 Handle a full cylinder with care. Gas is under high pressure. CGA-510 POL DANGER NEVER store a spare L.P. gas supply cylinder under the grill body or inside grill enclosure or in the vicinity of any heat producing appliance. (Fig. 12) NEVER fill the cylinder beyond 80% full. Failure to follow this information exactly could result in an explosion and/or fire causing death or serious injury. P
Résumé du contenu de la page N° 7
Assembly/Set up ■ Remove components from package. Lid TM Burner Heat Tent Grease Pan Grates Rotisserie Motor Blister Pack HVR Assembly Warming Rack Ignition Side Box Burner Grease Tray Rotisserie Brackets Rotisserie Spit Back Panel Middle Divider Right Leg Panel Left Leg Panel Top Panel Bottom Panel Left Side Burner Table Right Door Door Magnets Left Right Door Side Table Casters Door Tank Base Tool Towel Handles Hook Bar Trivet 7
Résumé du contenu de la page N° 8
Assembly/Set up (cont.) STEP 4 STEP 1 BOTTOM & SIDE PANELS TOP PANEL ■ Install three screws from the top and three Hex nuts from below as shown for each side panel. ■ Tighten screws. 6 Required ■ Set Top Panel into position Panel with hole on top of Middle Divider. 6 Required must be installed ■ Align holes and hand- as shown. install 2 screws. ■ Install screws where Top Panel joins to Sides. ■ Tighten screws. STEP 5 BACK PANEL ■ Install Back Panel as shown. NOTE: Top & bottom row of screw hol
Résumé du contenu de la page N° 9
Assembly/Set up (cont.) STEP 8 LEFT SIDE BURNER (cont.) STEP 6 INSTALLING IGNITION BOX ■ Insert the post through the mounting hole. ■ Install the Ignition Box to the left front leg (on the inside surface) with two self-tapping screws. Two holes are provided for location. 2 Required ■ Reinstall the hairpin cotter. STEP 7 RIGHT SIDE TABLE ■ Remove preinstalled screws from Right Supports. ■ Install Right Side Table. POST NOTE: Side Table Supports have slots for easy assembly. ■ Tighten securely.
Résumé du contenu de la page N° 10
Assembly/Set up (cont.) STEP 9 BURNER ASSEMBLY (cont.) STEP 11 ■ The cardboard packing GREASE PAN & GREASE TRAY below the burners ■ Note: Remove Grease Tray cannot be easily and packing from rear of grill. Grease Tray removed. It will burn (This is the storage position of away during the first the Grease Tray for shipping.) use. ■ Grease Pan attaches to Grease Tray with slides. ■ Install Grease Pan as shown. Grease Pan STEP 10 HOSE ROUTING ■ Slide Grease Tray into Grill. ■ Route Burner Val
Résumé du contenu de la page N° 11
Assembly/Set up (cont.) STEP 14 BURNER TRIVET STEP 18 DOORS ■ Install Left and Right Doors. ■ Open Left Side Burner Lid and place ■ Insert Bottom Door Pin into hole Trivet on Burner. on Bottom Frame. ■ Hinge Pins are spring-loaded. Pull down to insert Hinge Pin into Top Frame Hole. NOTE: Make sure the 2 holes on each Door are at the top when installed. Top Frame Bottom Frame Hole STEP 15 TOOL HOLDERS Bottom Door Pin ■ Install Tool Holders onto front of 4 Required Left Side Burner and Right Si
Résumé du contenu de la page N° 12
Assembly/Set up (cont.) Connecting Type 1 L.P. Gas Cylinders STEP 20 ROTISSERIE (cont.) WARNING ■ Install Rotisserie Motor & Rotisserie Spit as shown. ■ Make sure Rotisserie Motor is placed on the right side of the grill. This procedure MUST be performed OUTDOORS only! Be sure L.P. cylinder valve is closed. Attach to Grill. Read and NOTE: The Rotisserie Motor will appear to be upside down when installed follow directions on the cylinder and fuel hose safety tags. correctly. CAUTION In the connec
Résumé du contenu de la page N° 13
Leak Testing (cont.) Start-Up Check List How to Check for Leaks WARNING 1. Make a soapy solution of equal parts mild liquid dishwashing Failure to follow these safety steps before using grill each detergent and water. time could result in a fire that could be hazardous to you, your 2. Turn off all burner control knobs. appliance or property. It is especially important to observe 3. Turn on fuel supply. Turn cylinder valve knob counterclockwise these steps after the grill has been stored, moved
Résumé du contenu de la page N° 14
Lighting Instructions (cont.) Lighting Main Burners (cont.) Match-Lighting 18 1. Strike and place the burning match near the BURNER being 3 operated. 2. Turn on BURNER CONTROL KNOB while holding match near burner. 4 3. The other burners can be ignited by turning them on one at a time after first burner is lighted. CAUTION Use a LONG wooden match. Make sure all burner controls are off except one 1 being lighted. 2 Lighting Side Burner 1. Turn on side burner gas control knob. (Fig. 20) 2. Press
Résumé du contenu de la page N° 15
Shutting Off the Grill (cont.) General Use and Correct Burner Flames (cont.) 1. Turn all burner control knob(s) to off. 21 2. After burner flame goes out, turn off fuel supply. For an L.P. cylinder, turn the L.P. cylinder knob in a clockwise direction until it stops. Good Bad Yellow CAUTION Be certain the gas is shut off at the L.P. cylinder valve anytime the grill is not in use. Blue Yellow General Use and Correct Burner Flames Blue WARNING Keep grill area clean and free from combustible mate
Résumé du contenu de la page N° 16
In Case of Grease Fire Cleaning the Venturi (cont.) Steps For Cleaning Venturi: Follow These Steps: 1. Remove burner from grill bottom. 1. Shut off gas at the burner valve(s) and stay away! 2. Look inside lower end of venturi tubes for nests, webs or mud. 2. Allow the fire to burn itself out. 3. To remove the above obstructions, use an accessory flexible 3. Once the fire is out and the appliance has cooled, shut off the venturi brush or bend a small hook on one end of a 20-inch- L.P. cylinder
Résumé du contenu de la page N° 17
Cleaning and Maintenance (cont.) Troubleshooting COOKING GRIDS: Clean cooking grids with mild soap and hot Problem: Burner will not light or has incom- water. Remove stubborn residue with a mild cleanser or scrub plete burner flame. brush. Use a brass-bristle brush on porcelain-coated grids. DO NOT use a commercial oven cleaner. Possible Causes and Solutions: 1. Make sure the 9-volt battery is fresh. PORCELAIN-COATED HEAT TENTS: Wipe off grease residue 2. Check for spider webs or insec
Résumé du contenu de la page N° 18
For Your Additional Safety (cont.) Troubleshooting (cont.) IF YOU STILL HAVE A PROBLEM, THERE MAY BE AIR IN THE Problem: Flame behind control panel or CYLINDER DUE TO IMPROPER PURGING. control knob area. 2. The L.P. cylinder was not properly purged before it was filled. Possible Causes and Solutions: SOLUTION: See your L.P. gas supplier. IMMEDIATELY shut off cylinder valve and allow grill to cool. 1. Check for spider webs or insect nests in venturi and clean venturi. 2. Gas is leaking from a fau
Résumé du contenu de la page N° 19
Replacement Parts List Item Part No. Description Item Part No. Description 1 9947-2321 Left Side Burner Table, Stainless 16 9947-1051 Temperature Gauge 2 9947-6561 Cast Brass Side Burner 17 9947-3071 Leg Panel Assembly, Left, Stainless 3 9947-1471 Side Burner Control Knob 18 9947-3081 Leg Panel Assembly, Right, Stainless 4 9947-3271 Side Burner Electrode (Not Shown) 19 9947-4071 Back Cart Panel, Stainless 5 9947-1271 3 Black Control Knobs 20 9947-4511 Bottom Cart Panel, Black 6 9947-1591 3 Bezel
Résumé du contenu de la page N° 20
Warranty COLEMAN GAS BARBECUE GRILL LIMITED WARRANTY FOR 6000 SERIES GRILLS The Coleman Company, Inc. (“Coleman”) warrants that the following parts of this product will be free from defects in material and workmanship for the following time periods: the castings and burners carry a limited lifetime war- ranty; the electronic ignition components are warranted for ten (10) years; and the other components, except for the propane cylinder and paint finish, are warranted for five (5) years. We DO NO
