Résumé du contenu de la page N° 1
PC2CART-1, DC2CART-1
INSTALLATION INSTRUCTIONS
VERIFY THAT ALL PARTS LISTED ON THE EXPLODED VIEW OF THIS MANUAL HAVE BEEN INCLUDED IN
THIS CART BEFORE BEGINNING INSTALLATION.
CAUTION: USE CAUTION WHEN HANDLING PARTS, AS THEY MAY CONTAIN SHARP EDGES.
WORK GLOVES ARE RECOMMENDED TO PREVENT INJURY.
KEEP THIS OWNER’S MANUAL FOR FUTURE REFERENCE.
EMPIRE COMFORT SYSTEMS, INC • 918 FREEBURG AVE. • BELLEVILLE, IL 62220
B100999-1-0906
B100999-1-0906 Page 1
Résumé du contenu de la page N° 2
TABLE OF CONTENTS CONGRATULATIONS! You have chosen the finest grill for your outdoor cooking pleasure. Please take time to read this entire manual ® before assembling your premium Broilmaster accessory. Important Information ...................................................................................................................................... 3 PC Hardware Package ...................................................................................................................
Résumé du contenu de la page N° 3
IMPORTANT INFORMATION Gas Types Grill Location ® Never use liquid propane gas with a grill designed for Broilmaster Premium Gas Grills are designed for natural gas, or natural gas with a grill designed for liquid outdoor use ONLY. propane gas. The type of gas required for your grill is ® defined on its product identification label. Questions This cart is are designed for use with Broilmaster gas regarding different types of gases should be directed grills and must not be used with any o
Résumé du contenu de la page N° 4
PC HARDWARE PACKAGE B062998 KNOB Page 4 B100999-1-0906
Résumé du contenu de la page N° 5
DC HARDWARE PACKAGE B072220 SCREW 1/4-2 0 X 3/4 PH TRUSS HEAD BOS B1001 16 1/4-2 0 X ½ HEX HEAD BOS B062998 KNOB B100137 SCREW #10-24 X 3/8 PH TRUSS HEAD BOS B072181 1/4-20 WING NUT BOS B100999-1-0906 Page 5
Résumé du contenu de la page N° 6
CART EXPLODED VIEW 2 3 1 5 6 4 7 8 9 10 9 10 REMOVE PROTECTIVE COATING AND VERIFY THAT ALL PARTS LISTED ON THE EXPLODED VIEW OF THIS MANUAL HAVE BEEN INCLUDED BEFORE BEGINNING ASSEMBLY. CAUTION: USE CAUTION WHEN HANDLING PARTS, AS THEY MAY CONTAIN SHARP EDGES. WORK GLOVES ARE RECOMMENDED TO PREVENT INJURY. TOOLS REQUIRED: PHILLIPS HEAD SCREW DRIVER (AN ELECTRIC SCREW DRIVER OR DRILL IS RECOMMENDED TO EASE INSTALLATION.) Page 6 B100999-1-0906
Résumé du contenu de la page N° 7
CART PARTS LIST ® All repair part orders should be placed through your local Broilmaster dealer. To locate a dealer in your area, contact Broilmaster Customer Service at 800-851-3153 • www.broilmaster.com. To ensure prompt and accurate service, please provide the following information when placing a repair part order: Model Number, Part Name, Part Number, and Quantity of parts needed. KEY NO. PART NAME PC2CART DC2CART 1 KNOB B062998 B062998 2 DRIP PAN DRAWER ASSEMBLY B072205 B072210 3
Résumé du contenu de la page N° 8
FIGURE 2 CART ASSEMBLY 2 Attach drip pan bracket (5) to the rear brace of the base body Attention: Peel protective film from all parts assembly with two 1/4-20 x 3/4 phillips head screws and two before assembly. 1/4-20 Wing Nuts. Figure 2. Caution: Be careful when handling parts, as they may contain sharp edges. Work gloves are recom- mended to prevent injury. In each illustration parts are identified with "Key" num- bers. Key numbers appear in parenthesis after a part name is mentioned for t
Résumé du contenu de la page N° 9
CART ASSEMBLY 7 5 Using four 1/4-20 x 3/4 screws, fasten the grill to the Slide the mounting tabs on the control (7) housing be- cart. Figure 4. hind the opening on the cart. Allow the control housing to rest at bottom of opening on cart. Figure 6. Note: To ease assembly you may wish to install the ig- ® niter as shown in your Broilmaster grill manual before attaching the grill to the cart. FIGURE 6 FIGURE 4 6 8 Install one 1/4-20 x 1/2 hex head BOS into drip pan Align the holes in the front
Résumé du contenu de la page N° 10
FIXED BASE INSTALLATION INSTRUCTIONS Attention: Peel protective film from all parts 4 before assembly. Attach base to surface (deck, concrete, etc.) with four appropriate bolts (not supplied). Figure 9. Caution: Be careful when handling parts, as they may contain sharp edges. Work gloves are recom- mended to prevent injury. In each illustration parts are identified with "Key" num- bers. Key numbers appear in parenthesis after a part name is mentioned for the first time in the instructions and
Résumé du contenu de la page N° 11
FIXED BASE INSTALLATION INSTRUCTIONS 9 6 Install one 1/4-20 x 1/2 hex head BOS into drip pan Install one 1/4-20 x 3/4 phillips head screw into the fac- drawer assembly (2) and tighten knob (1). Figure 13. tory installed nut on the Left Side of cart. Figure 11. 7 Fasten the Cylinder Retainer (3) to the screw with a wing nut. Adjust height to accommodate your LP cyl- inder. Figure 11. FIGURE 13 10 Slide the mounting tabs on the control housing (7) be- hind the opening on cart. Allow the control
Résumé du contenu de la page N° 12
FIXED BASE INSTALLATION INSTRUCTIONS 12 Place the drip pan in the drip pan drawer and slide onto drip pan bracket. Figure 15. FIGURE 15 ® BROILMASTER A Division of Empire Comfort Systems, Inc. 918 Freeburg Ave. Belleville, Illinois 62220 Phone: 1-800-851-3153 FAX: 1-800-443-8648 VISIT OUR WEB SITE AT WWW.broilmaster.com RETAIN OWNER’S MANUAL FOR FUTURE REFERENCE. FORM NO. B100999-0-0906 Page 12 B100999-1-0906
