Résumé du contenu de la page N° 1
Model No.
No. de Modelo
TH-42PH20U
TH-50PH20U
Operating Instructions
Contents
High Defi nition Plasma Display
..................
Manual de instrucciones Important Safety Instructions 3
•
..................................
FCC STATEMENT 4
Alta defi nición Pantalla de plasma •
.................................
Safety Precautions 5
•
...........................................
Maintenance 6
•
.............................................
Accessories 7
•
.....................................
Résumé du contenu de la page N° 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important operating and servicing that parts inside the product are a risk of electric shock instructions are in the papers to per son
Résumé du contenu de la page N° 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
Résumé du contenu de la page N° 4
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Résumé du contenu de la page N° 5
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Panasonic Corporation.) • Speakers .................................................. TY-SP42P8W-K (for TH-42PH20U), TY-SP50P8W-K (for TH-50PH20U) • Pedestal ................................................... TY-ST2
Résumé du contenu de la page N° 6
Safety Precautions WARNING Do not use any power supply cord other than that Setup provided with this unit. Do not place the Plasma Display on sloped or unstable • Doing so may cause fi re or electric shocks. surfaces. • The Plasma Display may fall off or tip over. Securely insert the power cord plug as far as it will go. • If the plug is not fully inserted, heat may be generated Do not place any objects on top of the Plasma Display. which could cause fi re. If the plug is damaged or the • I
Résumé du contenu de la page N° 7
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating CD-ROM Remote Control Transmitter Batteries for the Instruction book (Operating N2QAYB000535 Remote Control instructions) Transmitter (AA Size × 2) Clamper × 3 AC cord TMME289 Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity (+ and -). “AA” size - + + - Helpful Hint: For freq
Résumé du contenu de la page N° 8
Résumé du contenu de la page N° 9
Connections Video equipment connection PC IN: PC Input T erminal SERIAL: Control the Connect to video terminal Plasma Display of PC or equipment with by connecting Y, PB(CB) and PR(CR) to PC. output. (see page 11) (see page 12) SLOT: T erminal board (optional accessories) insert slot (see page 5) Note: The right side slot is for terminal board with 2-slot width. The terminal board with 1-slot width does not function when installed in the right side slot. Terminals are on the bottom
Résumé du contenu de la page N° 10
Connections HDMI connection [Pin assignments and signal names] Pin No. Signal Name Pin No. Signal Name T.M.D.S Clock 1 T.M.D.S Data2+ 11 Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield 3 T.M.D.S Data2- 13 CEC 4 T.M.D.S Data1+ Reserved 14 T.M.D.S Data1 5 HDMI cable (N.C. on device) 19 3 1 Shield 6 15 T.M.D.S Data1- SCL 7 16 T.M.D.S Data0+ SDA T.M.D.S Data0 DDC/CEC 8 17 Shield Ground 9 18 T.M.D.S Data0- +5V Power 18 4 2 HDMI AV OUT 10 19 Hot Plug Detect T.M.D.S Clock+ DVD player Note: Addit
Résumé du contenu de la page N° 11
Connections PC Input Terminals connection (Female) COMPUTER Audio Stereo mini plug (M3) Connect a cable which matches the audio output terminal on the computer. Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable (Male) Notes: • With regard to the typical PC input signals that are described in the applicable input signals list, adjustment values such as for the standard picture positions and sizes have already been stored in this unit. You can add up to eight PC input signal types t
Résumé du contenu de la page N° 12
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. (Male) COMPUTER 9 8 7 6 52 4 3 1 Pin layout for SERIAL Terminal RS-232C Straight cable (Female) D-sub 9p Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied Signal names for D-sub 9P connector with this set. Details Pin No. The SERI
Résumé du contenu de la page N° 13
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Connecting the plug to the Wall Outlet. Note: When disconnecting the AC cord, be absolutely sure to INPUT MENU -/ VOL +/ ENTER/ disconnect the AC cord plug at the socket outlet fi rst. Power Indicator Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Remote Control Sensor Press the button on the remote control to turn the Plasma Display off. Power Indicator: Red (standby) Press t
Résumé du contenu de la page N° 14
Power ON / OFF When fi rst switching on the unit Following screen will be displayed when the unit is turned on for the fi rst time. Select the items with the remote control. Unit buttons are invalid. OSD LANGUAGE English (UK) OSD LANGUAGE Deutsch Français 1 Select the language. Italiano Español 2 Set. ENGLISH (US) Ру сский PRESENT TIME SETUP SELECT SET 1 Select “DAY” or “PRESENT TIME OF DAY”. 2 Setup “DAY” or “PRESENT TIME OF DAY”. PRESENT TIME SETUP PRESENT TIME OF DAY MON 9
Résumé du contenu de la page N° 15
Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: PC VIDEO COMPONENT* HDMI DVI VIDEO: Video input terminal in AV IN (VIDEO). COMPONENT*: Component or RGB input terminal in COMPONENT/RGB IN. HDMI: HDMI input terminal in AV IN (HDMI). DVI: DVI input terminal in DVI-D IN. PC: PC inp
Résumé du contenu de la page N° 16
Basic Controls Main Unit Remote control sensor Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 18) Enter / Aspect button INPUT MENU -/ VOL +/ ENTER/ (see page 18) Main Power On / Off Switch MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen Power Indicator will switch. The Power Indicator will light. Normal Viewing PICTURE SET UP • Power-OFF ....Indicator not i
Résumé du contenu de la page N° 17
Basic Controls Remote Control Transmitter OFF TIMER button The Plasma Display can be preset to switch to stand- by after a fi xed period. The setting changes to 30 ACTION button minutes, 60 minutes, 90 minutes and 0 minutes (off Press to make selections. timer cancelled) each time the button is pressed. ASPECT button 30 60 90 Press to adjust the aspect. 0 When three minutes remain, “OFF TIMER 3” will fl ash. The off timer is cancelled if a power interruption Standby (ON / OFF) button occurs. T
Résumé du contenu de la page N° 18
On-Screen Menu Displays Remote Control Unit Press several times. Display the menu screen. 1 MENU Each time the MENU button is pressed, the Press to select. menu screen will switch. (Example: PICTURE menu) Normal Viewing PICTURE SOUND POS. /SIZE SET UP Select the item. 2 Select. PICTURE Select. NORMALIZE NORMAL STANDARD Press. PICTURE MENU PICTURE 25 0 BRIGHTNESS COLOR 0 ( Example: TINT 0 SHARPNESS 5 PICTURE menu) COLOR TEMP NORMAL COLOR MANAGEMENT OFF ADVANCED SETTINGS Set . Set. S
Résumé du contenu de la page N° 19
On-Screen Menu Displays Overview Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. SET UP 1/2 [ ] POS. /SIZE SIGNAL VIDEO NORMAL NORMALIZE SIGNAL 3D Y/C FILTER (NTSC) ON AUTO SETUP SCREENSAVER COLOR SYSTEM AUTO H-POS 0 EXTENDED LIFE SETTINGS 3 : 2 PULLDOWN OFF H-SIZE 0 INPUT LABEL NOISE REDUCTION OFF V-POS 0 COMPONENT/RGB-IN SELECT V-SIZE 0 RGB DOT CLOCK 0 POWER SAVE OFF 0 SCREENSAVER CLOCK PHASE STANDBY SAVE OFF CLAMP PO
Résumé du contenu de la page N° 20
Specifi cations TH-42PH20U TH-50PH20U Power Source 110 - 127 V AC, 50/60 Hz Power Consumption Rated Power 290 W 350 W Consumption On mode Average Power 160 W 195 W ∗ Consumption Stand-by condition Save OFF 0.9 W, Save ON 0.4 W Save OFF 0.9 W, Save ON 0.4 W 0.2 W 0.2 W Power off condition Drive method : AC type 42-inch, Drive method : AC type 50-inch, Plasma Display panel 16:9 aspect ratio 16:9 aspect ratio 36.2” (921 mm) (W) × 20.4” (518 mm) (H) 43.5” (1,105 mm) (W) × 24.4” (622 mm) (H) Scree
