Résumé du contenu de la page N° 1
USER’S MANUAL
MANUEL DE L’UTILISATEUR
MANUAL DEL USUARIO
LTV-19w6
Widescreen LCD TV
TV LCD à Écran Géant
TV LCD Pantalla Grande
www.westinghousedigital.com
Westinghouse Digital Electronics SE-UM-1907-0601
Santa Fe Springs, CA
Résumé du contenu de la page N° 2
Table of Contents IMPORTANT PRODUCT SAFETY INSTRUCTIONS ......................................................................................2 Antenna Installation Safety...................................................................................................................................4 Cleaning the LCD TV ...........................................................................................................................................4 Safety Guidelines ...........
Résumé du contenu de la page N° 3
IMPORTANT PRODUCT SAFETY INSTRUCTIONS Read carefully and follow all warnings and instructions in this User's Manual and those marked on the product before you operate your television. Failure to follow warnings can result in personal injury or damage to product. Keep this User’s Manual in a convenient location for future reference. Proper Positioning of Television Always handle your LCD television with care. Avoid touching the LCD screen. Skin oils are difficult to remove. Alwa
Résumé du contenu de la page N° 4
To assure proper ventilation, do not block the openings by placing the LCD TV on a bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an enclosed rack, unless proper ventilation is provided. Other Notices and Precautions Caution: Never remove the rear cover. There are no user serviceable parts inside. Your LCD TV contains high-voltage parts. You may be seriously injured if you touch them. Do not attempt repairs yourself. Your
Résumé du contenu de la page N° 5
Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded so as to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements f
Résumé du contenu de la page N° 6
Safety Guidelines Warning: This device must be operated with the original power supply. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below: USA...............…UL Switzerland……SEV Canada.............CSA Britain ...........…BASE/BS Germany……….VDE Japan ........
Résumé du contenu de la page N° 7
Installation Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb WSXGA+ computer monitor —making it a practical solution for tight spaces in the office, bedroom, or kitchen. Watch television, play video games, e-mail, or surf the Internet. Package Contents Your LCD TV package includes: • 19” widescreen LCD TV • Detachable Base Stand • Remote Control (2 AAA
Résumé du contenu de la page N° 8
2. Attach Base Stand to LCD TV Attach the base stand to the LCD TV stand neck. Align the holes and tabs, press and snap the base stand into place. Detachable Base Stand To detach the base stand, just press on the locking tabs on the bottom of the base stand and remove the base stand from the stand neck. 7
Résumé du contenu de la page N° 9
3. Connect Antenna, Video, S-Video, YPbPr, DVI, and VGA Cables Connect video and audio cables from compatible devices to the back panel of the LCD TV. Video Inputs PC Inputs Video Inputs PC Inputs S- Video Audio-R Audio-L Video DVI YPbPr Antenna D-Sub (VGA) Audio-In Audio-Out 8
Résumé du contenu de la page N° 10
Note: The Audio-L and Audio-R (Audio L/R) inputs are shared between YPbPr, S-Video, and Video source input connectors. Connecting a computer to the LCD TV: IMPORTANT: Before you begin, make sure the computer and TV are turned off. Connect a D-Sub (VGA) or DVI cable and an audio cable to the back of the LCD TV. D-Sub CONNECTION: Connect an analog D-Sub (VGA) cable from your computer VGA port to the D-Sub input connection. Connect a 3.5mm stereo mini-cable from the computer
Résumé du contenu de la page N° 11
4. Connect Power Cable Connect the power cord to the back of the LCD TV and then into a properly grounded AC outlet. 5. Turn Power On Press the power button on the right side of the LCD TV or on the remote control to turn on the TV. Power Button Remote Power Button 10
Résumé du contenu de la page N° 12
6. Programming TV Channels 1. Select TV as the source input using the Source button on the remote control. 2. Press the Menu button to display the OSD Display Menu. 3. Use the CH ▲/ ▼arrow keys to highlight the TV Menu. 4. Using the Vol ► arrow keys select the TV sub-menu. Use the ▼ to highlight the CH Auto Scan function. Press Vol ► arrow key and Channel Auto Scan will be performed. 5. Once the CH Auto Scan is complete, switch channels by using the CH ▲/ ▼ arrow keys on
Résumé du contenu de la page N° 13
Controls & Connections This section describes the keypad panel controls, and remote control in more detail. Front View of the Product Use the buttons on the right side keypad control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the next page and are defined in the “OSD Functions” section. IR Receiver Keypad Controls Speakers 12
Résumé du contenu de la page N° 14
Side Keypad Controls 1 2 3 4 5 6 Button Mode TV Source OSD Menu 1 CH+ Channel up Navigate up 2 Channel down Navigate down CH- 3 Vol- Volume down Decrease value Vol+ 4 Volume up Increase value Press and hold for 2 seconds to 5 Menu/Source access the OSD menu. Press Enter/Exit Menu and release to change source. 6 Power TV ON or OFF TV ON or OFF 13
Résumé du contenu de la page N° 15
Remote Control 1. Mute Turn audio on and off. 2. MTS (Multi-channel TV Sound) Stereo, Mono and SAP sound selection 13 3. Power 4 Switch the power on and off. 2 4. Sleep 5 Automatically turn off the TV after a set time. 6 5. Display 9 Display the channel information. 7 6. PIP Available in D-Sub/DVI Modes; to turn PIP 8 picture on & off and select PIP picture size. 7. PIP Menu 10 Used to navigate through the PIP OSD 12 menu and control audio swap. 11 13 8. Return Recall th
Résumé du contenu de la page N° 16
OSD Functions This section describes each on-screen display (OSD) command. There are different OSD menus depending on whether you are in TV, Video (Video/S-Video/YPbPr) or PC (D-Sub/DVI) mode. All the function settings for your LCD TV are controlled either via the remote control or using the control keys located on the right side of the LCD TV. To display the OSD main menu, press and hold the Menu button on the control keys or the MENU key on the remote control. Use the ▲/ ▼ arrow ke
Résumé du contenu de la page N° 17
Audio Menu In the Audio Menu use the Vol ► button to select the Audio sub-menu. Use the CH ▲/ ▼ buttons to highlight the function. Then use the Vol ◄/ ► arrow keys to change the values of the function in the OSD menu. Function Name Explanation Volume Volume adjustment Mute Turn Audio Off and On Treble Treble adjustment Bass Bass adjustment Balance Left to Right Audio adjustment MTS Multi-channel Television Sound, select SAP, MONO, or STEREO Color Menu In the Color Men
Résumé du contenu de la page N° 18
TV Menu In the TV Menu, use the Vol ► button to select the TV sub-menu. Use the CH ▲/ ▼ buttons to highlight the function. Then use the Vol ◄/ ► arrow keys to change the values of the function in the OSD menu. Function Name Explanation Tuner System Select between STD, HRC, IRC, Air (Depending on your local area) CH. Auto Scan Start to scan channel after pressing right or left key, and stop scan if any key is pressed. CH. Fine Tune Tune channel from 0-100 Blue Screen Toggle betwe
Résumé du contenu de la page N° 19
Function Name Explanation Language English, Chinese, French, Spanish OSD Transparency Set OSD transparency level OSD Time-out Set the time to turn off the OSD automatically OSD Position OSD horizontal/vertical position adjustment Reset Restore factory default settings Sleep Set the Sleep timer for 30, 45, 60, 90, or 120 minutes Aspect Ratio Set the display to Full, Normal, or Zoom (Can only change with an active signal) V-Chip and Parental Control Menu To access the PARENTAL CO
Résumé du contenu de la page N° 20
Rating Menus Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the PIN code. Use the ▼ button to highlight the Movie (MPAA) or TV (TVPG) menu. Use the ► button to select the sub-menu. Use the ▲/ ▼ buttons to highlight the Movie/TV Rating to be blocked or un-blocked. Press the MENU button to lock and unlock the highlighted rating. Press EXIT to exit the V-chip menu. Function Name Explanation MOVIE RATING G: General audience PG: Paren
