Résumé du contenu de la page N° 1
®
V iewSonic
N4200w
- User Guide
LCD TV
- 使用手册
Model No. : VS10945-1G
Résumé du contenu de la page N° 2
Contents Important Safety Instructions ......................................................................... 1 Copyright Information..................................................................................... 2 Product Registration ...................................................................................... 2 Product disposal at end of product life........................................................... 2 Antenna Installation Instructions ........................
Résumé du contenu de la page N° 3
Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this guide for further instructions. 7. Do not block any
Résumé du contenu de la page N° 4
Copyright Information ® Copyright© ViewSonic Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product. In the interest of continuing product imp
Résumé du contenu de la page N° 5
Antenna Installation Instructions 1. Outdoor Antenna Grounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charge. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding ele
Résumé du contenu de la page N° 6
Getting Started You are now ready to install your LCD TV. Please make sure you have read the safety instructions before proceeding. Important! Save the original box and all packing material for future shipping needs. Package Contents Please check that your LCD TV package includes: LCD TV Quick Start Guide ViewSonic User’s Guide RF Cable AC Power Cable Warranty Card Universal Remote Control with Service Sticker Batteries Important! If there are any items missing from this lis
Résumé du contenu de la page N° 7
Fixing ViewSonic LCD TV to the Wall The LCD TV can be wall-mounted or freestanding. Before installing the product to the wall, please consider the following guidelines: • Read the Important Safety Instructions, at the start of this manual. • Do not install in a moist or wet environment. This equipment is intended for indoor use only. • Do not install near heat source, or strong magnetic fields. • Use only approved wall brackets capable of supporting the weight of the LCD TV. • Mount yo
Résumé du contenu de la page N° 8
Relocating the Satellite Speakers To replace the speakers attached to LCD TV or extend the cable please contact ViewSonic or your local distributor for advice. To detach the satellite (side) speakers from the main LCD TV unit, please read the following guidelines: 1. Disconnect the power to LCD TV. 2. Now remove the audio cable from the LCD TV. 3. Set the LCD TV on a table or work surface, screen-down with a towel or woolen blanket between the screen and the surface to protect the
Résumé du contenu de la page N° 9
Introducing ViewSonic LCD TV Front Display and Controls A INPUT Select input sources. B MENU Toggle the OSD menu . Decrease the volume during normal operation or adjust a C VOL- highlighted control whilst using the OSD menu. Increase the volume during normal operation or adjust a D VOL+ highlighted control whilst using the OSD menu. CH ﹀ E Channel down/ Scroll down. F CH ＾ Channel up/ Scroll up. G Turn the power on/off. ViewSonic 7 N4200w
Résumé du contenu de la page N° 10
Rear Panel and Connections A POWER S/W Power (on/off) switch. B AC IN Using the cable provided, plug the TV into the nearest outlet. C HDMI (1) Have one HDMI cable terminals of your DVD player. D HDMI (2) Have one HDMI cable terminals of your DVD player. Connect the VGA cable output of PC to the VGA terminal input. E VGA Use a PC to Phono audio-cable to connect the audio output of your F PC STEREO PC to the audio input terminal. Connect external video devices such as VCR, DVD, and
Résumé du contenu de la page N° 11
Side Panel Connections Connect audio output (right channel) from compatible devices to A Audio-R this terminal. Connect audio output (left channel) from compatible devices to B Audio-L this terminal. Connect external video devices such as VCR, DVD, and video C VIDEO game to this jack. Connect external video devices such as VCR, DVD, and video D S-V games to this DIN socket. Connect audio output (right channel) from compatible devices to E Audio-R this terminal. Connect audio
Résumé du contenu de la page N° 12
Remote control The following table describes the functions for the Universal Remote control. Select Input Source (e.g. Video, Antenna, PC). A 信号源 (SOURCE) B 0~100+ channel selectors Use these buttons to select a channel. Adjust Volume. C 音量 (VOL+ / VOL-) UP/DOWN for OSD function select and LEFT/ UP/DOWN/LEFT/ RIGHT/ OK RIGHT for function adjust. Press OK to confirm D buttons your selection. Temporarily switch off audio output retaining E 静音 (MUTE) the current volume settings.
Résumé du contenu de la page N° 13
Toggles between input sources for the Main and K 画中画/ 信号 源互换(PIP/SWAP) Sub pictures. L 观赏模式 (WIDE) Change Aspect Ratio. M 休眠 (SLEEP) Set timer to turn off the Display. N 菜单 (MENU) Display menu or exit OSD menu. 频道 (CH﹀ / CH＾) O Sequentially scrolls between channels. P Power ON/OFF. 电源 ViewSonic 11 N4200w
Résumé du contenu de la page N° 14
Preparing Your LCD TV 1. Insert Remote Control Batteries a) Remove the battery cover by pushing the catch in the middle of the remote control and then lifting the cover. b) Align the batteries according to the (+) and (-) markings on the battery and those in the compartment. c) Replace the battery cover and push down until it clicks into place. CAUTION Only use the specified AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a
Résumé du contenu de la page N° 15
2. Connecting an External Antenna Make sure the power is off before installing an external antenna to N4200w. Connect the TV antenna to the LCD TV terminal or CATV box using only 75-ohm coaxial cable. RF Cable or Adapter 3. Connecting to Audio Output To connect an external amplifier, connect the L/R RCA cable from the TV AUDIO OUT port to the appropriate AUDIO IN port on a compatible amplifier. Audio in Cable (Cable not supplied) ViewSonic 13 N4200w
Résumé du contenu de la page N° 16
4. Connecting to a SPDIF Device To digitally transfer audio to an external amplifier, PC, or recorder, use a compatible SPDIF stereo jack to connect to the LCD TV. SPDIF Cable (Cable not supplied) 5. Connecting AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices The following figures show the available connections to the rear-panel of LCD TV, and how to connect them to the corresponding device. In nearly all cases, the cables are color-coded to match the terminals on the rear panel.
Résumé du contenu de la page N° 17
S-Video model: Connect video cable to the output jack on the video source, and the S-video input jack on the LCD TV. Now connect the audio cables to the left and right audio-out terminals on the video source to the audio-in terminals. S-Video Cable (Cable not supplied) Audio in Cable (Cable not supplied) VCR YCbCr / YPbPr model: Connect video cables to the Y, Pb/Cb, Pr/Cr outputs on the video source, and the Y, Pb/Cb, Pr/Cr inputs on the LCD TV. Now connect the audio cables to t
Résumé du contenu de la page N° 18
HDMI and HDTV: LCD TV is compatible with HDTV and HDMI, uncompressed interference free digital transmission standards. The former requires additional audio cable; in this case connect the audio outputs on the DVD player to the PC stereo input. The latter, is an all-in-one interface supporting audio and video in a single cable. There are two possible HDMI cable connections to your DVD player. Please refer to the connection that matches your equipment. DVD Player (Cable not supplied)
Résumé du contenu de la page N° 19
PC Audio in: Connect an audio-cable from the audio output (green terminal) of your PC to the audio input terminal (also green) of N4200w. PC PC Audio Cable (Cable not supplied) HDMI: Connect the HDMI cable from DVI output of PC to the HDMI input of N4200w. PC HDMI Cable (Cable not supplied) ViewSonic 17 N4200w
Résumé du contenu de la page N° 20
7. Connecting the power cable Connect the power cable to the N4200w then to a properly grounded AC outlet. Turn on the AC Switch on the back of N4200w. AC Switch Switch to ON AC wall socket 8. Powering LCD TV Press the Power button at the bottom of the LCD TV, or press the Power button on the Remote Control. Now switch on the external video player. ViewSonic 18 N4200w
