Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
SAFETY PRECAUTIONS PLACEMENT INFORMATION • Do not use this unit in places that are extremely hot, cold, dusty or humid. • Do not restrict the airflow of this unit by placing it somewhere with poor air flow, by covering it with a cloth, by placing it on bedding or carpeting. • The apparatus shall not be exposed to dripping WARNING : TO REDUCE THE RISK OF ELECTRIC or splashing and that no objects filled with liquids, SHOCK, DO NOT REMOVE COVER (OR BACK). such as vases, shall be placed on apparatus
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. plugs, convenience receptacles, and the point where they exit from the 2) Keep these instructions. apparatus. 3) Heed all warnings. 11) Only use attachments / accessories 4) Follow all instructions. specified by the manufacturer. 5) Do not use this apparatus near water. 12) Use only with the cart, stand, 6) Clean only with a dry cloth. tripod, bracket, or table 7) Do not block any ventilation openings. specified by the Install in accordan
Résumé du contenu de la page N° 4
3 15/16” QUICK INSTALLATION ATTACHING THE BASE STAND • Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal. WARNING: The LCD display is very fragile and must be protected at all times when attaching the base stand. Be sure that nothing hard or sharp, or anything that could scratch or damage the LCD display, comes in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. The Base Stand CAUTIONS: Attach the
Résumé du contenu de la page N° 5
QUICK INSTALLATION When you turn on your television set for the first time, be sure to place it on a solid stable surface. To avoid danger, do not expose the TV to water, or a heat source (e.g. lamp, candle, radiator). Do not obstruct the ventilation grid at the rear and be sure to leave sufficient gaps around the unit as shown. TURNING ON THE UNIT FOR THE FIRST TIME The first time you turn on the unit, the unit will enter Setup mode. You can easily follow the prompt message on the screen to co
Résumé du contenu de la page N° 6
ACCESSORIES Please check and identify the supplied accessories. Remote Control ......................................................................................................................... x 1 “AAA” Batteries (for remote control) ........................................................................................ x 2 Screws (for base stand) .......................................................................................................... x 4 GETTING STARTED USING THE REMO
Résumé du contenu de la page N° 7
REMOTE CONTROL REFERENCE GUIDE REMOTE CONTROL 6. DISPLAY button 10 Press to show that input you are watching 1 11 (TV/AV In/YUV In/PC In). 7. VOLUME (- / +) Buttons Press to adjust the volume level. 2 8. CC Button Press to activate the Closed Captioning feature. This function only works on 3 12 programs broadcasted with captions. 13 4 9. TV Button Press to switch to TV mode. 5 10. PICTURE Button 6 14 Press to select from preset screen display settings to match the type of show 7 you are watching
Résumé du contenu de la page N° 8
CONTROL REFERENCE GUIDE FRONT AND SIDE VIEWS 1) Button Turns the unit on and off. 2) MENU Button Enters the on-screen TV menu. 3) FUNCTION Button Selects TV/AV In/YUV In/PC In. 4) CH Buttons Confirms selections on the TV menu screen and changes the TV channels. 5) - VOL + Controls Adjusts the volume level. 6) Color LCD Screen 7) Remote Sensor Receives the remote control signal. 8) Speaker 9) Removable Stand REAR VIEW 10) AC Power Cord 11) VIDEO OUT Jack - AV OUT 12) AUDIO OUT Jacks (Left/Right)
Résumé du contenu de la page N° 9
CONNECTIONS CONNECTING A TV ANTENNA / CABLE / SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts. Satellite, cable or TV Connecting an Analog antenna cable to TV ANTENNA terminal
Résumé du contenu de la page N° 10
CONNECTIONS CONNECTING DEVICES WITH A COMPOSITE (YELLOW RCA-TYPE) VIDEO OUTPUT To connect A/V devices such as a VCR, video game system or camcorder: Connecting a VCR / Video Game System / Camcorder Connect the AUDIO / VIDEO cable (not included) as shown. Make sure you connect the cable from the other equipment (AUDIO and VIDEO OUT) to this unit (AUDIO and VIDEO IN). NOTE: Please refer to the user manual for the other equipment for more information. To AUDIO / VIDEO IN jacks (AV IN) To AUDIO / V
Résumé du contenu de la page N° 11
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) devices with component video output must be connected to the YUV input. Connect the component video cable and audio cable (not included) as shown. Make sure you connect the component video cable and audio cable from the other equipment (COMPONENT VIDEO OUT and AUDIO OUT) to this unit (COMPONENT VIDEO IN and AUDIO IN - YUV IN). T o AUDIO IN jacks (YUV IN) To AUDIO OUT jacks * May require a subscription To COMPONENT To COMPO
Résumé du contenu de la page N° 12
CONNECTIONS CONNECTING AN AUDIO AMPLIFIER This connection allows you to use an audio amplifier and external speakers. Connect the AUDIO cable (not included) as shown. Make sure you connect the cable from the other equipment (AUDIO IN) to this unit (AUDIO OUT). To AUDIO IN jacks To AUDIO OUT jacks CONNECTING THE AC POWER CORD • Connect the AC power cord into a wall outlet. • Press the STANDBY / ON button on the left side of the unit or use the remote control to turn on the unit. NOTES: • TO PREVE
Résumé du contenu de la page N° 13
TV SETUP Note: Some settings on the menu screen may not activate depending on which mode the unit is currently in (TV/AV/YUV/PC). PICTURE MENU 1. Press the MENU button. PICTURE PICTURE AUDIO TIME SET UP PARENTAL TV Picture Mode Standard 2. Press the button to enter PICTURE settings. Contrast 63 3. Use the or button to select the options (Picture Brightness 44 Mode, Contrast, Brightness, Sharpness, Tint Sharpness 38 or Color). Adjust them using the or button (The Tint 0 screen will change to
Résumé du contenu de la page N° 14
TV SETUP TIME MENU 1. Press the MENU button. 2. Use the or button to select TIME, then press the PICTURE AUDIO TIME TIME SET UP PARENTAL TV button to enter the TIME settings. OSD Duration 15 Sec Sleep Timer Off 50 3. Use the or button to select the options (OSD Time Zone Eastern 50 Duration, Sleep Timer, Time Zone, Day Saving Day Saving Time Off Time or Clock). Adjust them using the or button. Clock 2007/03/05 04:39PM 4. Repeat step 3 to adjust other options. 5. To exit the MAIN MENU and
Résumé du contenu de la page N° 15
TV SETUP PC Set Up (in PC mode only) - Resolution : 1680 x 1050 max PICTURE AUDIO TIME SETUP SETUP SETUP - Refresh Frequency : 60Hz max H-Pos 50 50 H - Pos : Center the image by moving it left or right. V-Pos Clock 50 V - Pos : Center the image by moving it up or down. Phase 100 Clock : Adjusts the display clock to change width of Auto adjust the image. Phase : Adjusts the image if there is flicker of screen letters, color misalignment, or blurring. Best Resolution is 1680x1050 UP/DOWN ADJUST
Résumé du contenu de la page N° 16
TV SETUP Parental 1. Use the or button to select various Parental PICTURE AUDIO TIME SET UP P PARENT ARENTAL AL TV settings. Adjust them using the or button, or press Change Password the button to go into the detailed settings. Rating Enable On 2. Press the MENU button to return to the previous menu. US 3. Repeat steps 1 - 2 to adjust other options. Canada 4. To exit the MAIN MENU and return to the normal RRT Setting screen, press the EXIT or MENU button repeatedly. Reset RRT UP/DOWN ADJUST
Résumé du contenu de la page N° 17
TV SETUP TV MENU (For TV Mode Only) 1. Press the MENU button. PICTURE AUDIO TIME SET UP PARENTAL TV TV 2. Use the or button to select TV, then press the Antenna Air button to enter the TV settings. Auto Scan 3. Use the or button to select the options Auto Scan Add CH (Antenna, Auto Scan, Auto Scan Add CH, Channel Skip Channel Skip, Channel No., Channel Label or Channel No. 5-5 Channel Label XXX DTV Signal). Adjust them using the or button, DTV Signal or press the button to go into the de
Résumé du contenu de la page N° 18
MAINTENANCE CLEANING THE UNIT • Be sure to turn the unit off and disconnect the AC power cord before cleaning the unit. • Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that has been dipped in a weak soap-and-water solution and wrung out thoroughly. Then wipe it with a dry cloth. • Never use alcohol, benzene, paint-thinner, cleaning fluid or other chemicals. Do NOT use compressed air to remove dust. TROUBLESHOOTING GUIDE SYMPTOM CAUSE (
Résumé du contenu de la page N° 19
Unit : INCH PLV36220CS1_12-19.pmd 18 10/24/2007, 7:47 PM
Résumé du contenu de la page N° 20
VENTURER ELECTRONICS (“VENTURER”) makes the following limited warranty. This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product. Ninety (90) Day Parts & Labor Warranty VENTURER products purchased in the United States are warranted to be free from defects in materials or workmanship for a period of ninety (90) days from the date of their original retail purchase. If the unit fails to conform to this warranty, we will service the product
