Instruction d'utilisation Edelbrock 641540

Résumé du contenu de la page N° 1

RUSSELL FORD 5.0L COMPLETE EFI
PLUMBING KIT
Catalog #641540
INSTALLATION INSTRUCTIONS
Please study these instructions carefully before installing your new complete fuel system kit. If you have any questions, please call
our Technical Hotline at: 1-800-416-8628, 7:00 am to 5:00 pm, Monday - Friday, Pacific Standard Time or e-mail us at
Edelbrock@Edelbrock.com.
KIT CONTENTS
❑ 1 Edelbrock Fuel Pump #1790 ❑ 1 Russell assembly lube/sealant
❑ 1 Edelbrock Fuel Pressure Regulator Kit #1728 ❑ 20 ft. Rus

Résumé du contenu de la page N° 2

BEFORE BEGINNING Someone who has a basic knowledge of automobile repair and modification and is familiar with and comfortable with working on their vehicle can accomplish the mechanical installation of this kit using common tools and procedures. However, this kit is designed to allow you to custom fit the fuel lines and components to your application, and will require that you cut hoses to fit and drill holes for fuel pressure regulator mounting, junction blocks, etc. If you do not feel comforta

Résumé du contenu de la page N° 3

FORD EFI 302 COMPLETE KIT FUEL RAIL INSTALL Russell fuel rail install: Note: Some modification to the fuel pressure regulator bracket may be needed for the correct fitment in your 1. Attach supplied brackets to the supplied fuel rails using desired location. Refer to the included fuel pressure the supplied hardware. Use thread locking compound. regulator instructions for details. Note: Install most of the necessary components onto the fuel 2. Following the instructions provided with the fuel rai

Résumé du contenu de la page N° 4

3. Connect other large (12 gauge) red relay wire to the 1. Determine the hose path and length required for the positive (+) battery terminal. fuel hose leading from the fuel tank outlet fitting (not included) to the fuel inlet fitting of the fuel pump. Build 4. Connect small pink relay wire to a 12V switched (“key- and install the hose assembly. on”) power supply (e.g. terminal in a fuse box or splice on ignition switch). 2. Determine the hose path and length required for the fuel hose from the

Résumé du contenu de la page N° 5

©2007 Edelbrock Corporation Catalog #641540 Page 5 of 5 Brochure No. 63-641540 Rev. 10/07 - AJ/mc

Résumé du contenu de la page N° 6

Edelbrock Corporation, 2700 California St., Torrance, CA 90503 Tech Line: 800-416-8628 E-Mail: Edelbrock@Edelbrock.com ©2007 Edelbrock Corporation Catalog #641540 Brochure No. 63-641540 Rev. 10/07 - AJ/mc