Instruction d'utilisation Edelbrock 2701

Résumé du contenu de la page N° 1

Performer and Performer RPM Intake Manifolds
®
For Small Block Chevrolet Engines
INSTALLATION INSTRUCTIONS
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this
installation, it is recommended to have the installation completed by a qualified mechanic. If you have any questions

Résumé du contenu de la page N° 2

� EGR SYSTEMS: Edelbrock EGR-equipped Performer manifolds are intended as a direct functionally identical replacement for their O.E.M. counterparts. All exhaust emissions or emissions related stock components are intended to be retained and functional. Non-EGR equipped manifolds will not accept stock EGR (Exhaust Gas Recirculation) equipment. EGR systems are used on some 1972 and later model vehicles and only in some states. Check local laws for requirements. Manifolds not equpped with EGR are n

Résumé du contenu de la page N° 3

� THROTTLE BRACKETS: Due to the design of Performer manifolds, the throttle and kickdown bracket on some vehicles may require modification to fit. See Figure 1 for guidelines or purchase our #8031, 8030 or 8036 throttle, cruise, and kickdown linkage brackets for pre- 1995 cylinder heads. On Vortec or E-Tec cylinder head applications, purchase throttle bracket #8032 � GASKETS: Do not use competition style intake gaskets for this street manifold. Due to material deterioration over time, internal

Résumé du contenu de la page N° 4

� CAMSHAFT AND HEADERS: The Performer Series manifolds are compatible with aftermarket camshafts and headers designed to work in the idle-5500 rpm range. Edelbrock has developed dyno-matched, street proven camshafts (#2102 for 262-350 cid and #2103 for 400 cid engines) for use with Performer Series intake manifolds. Header primary tube diameter should be 1-5/8". Performer RPM Series manifolds are compatible with aftermarket camshafts and headers designed to work in the 1500-6500 rpm range. Edelb