Résumé du contenu de la page N° 1
LC-13S1U/LC-15S1U/LC-20S1U
03. 12. 11
LC-13/15/20S1U(Mex)Cover
LC-13S1U
LC-15S1U
LC-20S1U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135 DE CRISTAL LÍQUIDO
TELEVISOR DE CRISTAL
SHARP CORPORATION
LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
MANUAL DE OPERAÇÃO
Printed in Mexico
Imprimé au Mexique
Impreso en México
Products that have earned the ENERGY STARb are designed to protect the
Impresso no
Résumé du contenu de la page N° 2
LC-13S1U LC-15S1U LC-20S1U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the Serial No.: rear of the TV. U.S.A. ONLY IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow- head symbol, within an equilat- eral triangle, is intended
Résumé du contenu de la page N° 3
IMPORTANT INFORMATION (Continued) WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment. U.S.A. ONLY CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. “Note to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the National Electrical Code that provides
Résumé du contenu de la page N° 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. Ho
Résumé du contenu de la page N° 5
IMPORTANT SAFETY PRECAUTIONS (Continued) Cleaning—Unplug the power cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink and laundry tub, swimming pool and in a wet basement. Stand—Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product
Résumé du contenu de la page N° 6
IMPORTANT SAFETY PRECAUTIONS (Continued) Outdoor Antenna Grounding – If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, l
Résumé du contenu de la page N° 7
CONTENTS Page IMPORTANT INFORMATION.......................................................................................................1, 2 DEAR SHARP CUSTOMER .............................................................................................................3 IMPORTANT SAFETY PRECAUTIONS .......................................................................................3-5 CONTENTS .................................................................................................
Résumé du contenu de la page N° 8
SUPPLIED ACCESSORIES Make sure the following accessories are provided with the product. Remote Control “AAA” size Battery (×2) RRMCGA174WJSA Antenna Cable AC Cord QCNWG0003CEPA QACCDA023WJPA AC Adapter Operation Manual Cable Clamp UADP-0212CEZZ UBATU0026GEZZ UADP-A044WJPZ TINS-A857WJZZ LHLDWA002WJSB A • AC cord enclosed in this product is an object for 110-125V. In using it on the 125-240V AC, please consult to the following. SHARP ELECTRONICS CORPORATION 1300 Naperville Drive, Romeoville, Illin
Résumé du contenu de la page N° 9
PREPARATION Using the Remote Control Use the remote control by pointing it towards the remote POWER OPC HEADPHONE control sensor window on the main unit. Objects between HEADPHONE jack the remote control and sensor window may prevent proper operation. OPC indicator POWER indicator Cautions regarding use of the remote control Remote control Do not expose the remote control to shock. sensor In addition, do not expose the remote control to liquid, and OPC sensor do not place in an area with hig
Résumé du contenu de la page N° 10
PREPARATION (Continued) Removing the Terminal Cover LC-20S1U Before connecting cables and cords to the rear terminals, remove the terminal cover. Push in the tab and pull out the terminal cover carefully. To mount the cover, insert the 2 hooks on the bottom of the cover into the cabinet and press on the upper part of the terminal cover until the tab locks in place with a click. LC-13/15S1U Before connecting cables and cords to the rear terminals, remove the terminal cover. Push in the 2 ta
Résumé du contenu de la page N° 11
PREPARATION (Continued) Antenna Connection ANTENNAS • The antenna requirements for good color television reception are more important than those for black & white television reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connections that are provided with the various antenna systems. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal
Résumé du contenu de la page N° 12
PREPARATION (Continued) Antenna Connection (Continued) CABLE TV (CATV) CONNECTION • A 75-ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75- ohm coaxial cable to the set, screw the 75-ohm cable to the ANT. terminal. • Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler i
Résumé du contenu de la page N° 13
35° 12° DISPLAY AND CONTROL OVERVIEW Controls Upper control panel VOL (–)/(+) CH ( )/( ) MENU TV/VIDEO MAIN POWER The screen can be adjusted backwards to an angle between 12 degrees and 35 degrees. The screen cannot be set up straight. When changing the angle, make sure to hold the stand and adjust the screen to the best viewable angle. Adjustable range Speaker OPC sensor HEADPHONE jack Plug the headphone mini-plug into the HEADPHONE jack located on the front of the TV set. OPC indicator (Optic
Résumé du contenu de la page N° 14
DISPLAY AND CONTROL OVERVIEW (Continued) Terminals VIDEO AUDIO (L) AV-IN1 AUDIO (R) S-VIDEO ANT. (Antenna terminal) Y PB PR COMPONENT AUDIO (L) AUDIO (R) POWER INPUT (DC12V) Carrying handle Round lock for Kensington Security Standard Slot. Stand The screen can be adjusted backwards to AUDIO (R) an angle between 12 AUDIO (L) AV-OUT AV-IN2 and 35 degrees. When changing the VIDEO angle, make sure to hold S-VIDEO the stand and adjust to (INPUT ONLY) the best viewable angle. * Be careful to prevent
Résumé du contenu de la page N° 15
REMOTE CONTROL 1 POWER (p. 21) Switch the Liquid Crystal Television power on or off. 10 1 BRIGHT 2 SLEEP (p. 26) 11 Set the sleep timer. SLEEP PIC. FLIP 2 12 3 ENTER ENTER Execute a command. 3 DISPLAY MENU 13 4 4 DISPLAY AUDIO 14 5 MUTE CC TV/VIDEO ONLY Display the channel and time information. 6 15 FLASH- 5 AUDIO ONLY (p. 29) BACK VOL CH Output audio without screen image. 7 16 6 MUTE (p. 23) 8 Mute the sound. 7 VOL (+)/(–) (p. 23) 17 Set the volume. 8 CH ( )/( ) (p. 24) 9 Select channel. 9 MTS
Résumé du contenu de la page N° 16
EZ SETUP (WITH AUTO CLOCK SETTING) EZ SETUP during the First Power On Control section of main unit When you turn on the TV for the first time, it will automatically memorize the broadcasting channels and clock. Please perform the following instructions before you press MAIN MAIN POWER POWER. (1) Insert the batteries into the remote control. (See page 8.) (2) Connect the antenna cable to the TV set. (See page 10.) (3) Connect the AC adapter to the POWER INPUT terminal of the product and plug in
Résumé du contenu de la page N° 17
EZ SETUP (WITH AUTO CLOCK SETTING) (Continued) EZ SETUP during the First Power On (Continued) 6 Press a/b to select YES, and CONNECT ANTENNA OR CABLE. press ENTER. BRIGHT START EZ SETUP? SLEEP PIC. FLIP If you want to stop the EZ SETUP YES NO process once it has started, press ENTER DISPLAY MENU c and it will be canceled. If you ENTER/ AUDIO want to SET UP again, please refer MUTE ONLY CC TV/VIDEO a/b/c/d to pages 35 and 36 on SET UP. FLASH- BACK VOL CH ENTER MENU SELECT : ENTER : EXIT: T
Résumé du contenu de la page N° 18
SETTING THE CLOCK AUTO CLOCK Setting There are two methods of setting the clock: AUTO CLOCK and MANUAL CLOCK. AUTO CLOCK uses EDS signals, which are provided by some TV stations, to automatically adjust the clock. MANUAL CLOCK set the clock manually in areas where no channel carries EDS signals. 1 Press MENU to display the MENU MENU SLEEP TIMER screen. AV ADJUST BRIGHT PRESET SLEEP PIC. FLIP CLOSED CAPTION V–CHIP BLOCK ENTER SET UP DISPLAY MENU ENTER/ AUDIO MUTE ONLY CC TV/VIDEO a/b FLASH- 2 Pre
Résumé du contenu de la page N° 19
SETTING THE CLOCK (Continued) AUTO CLOCK Setting (Continued) 5 Press a/b to move the cursor to EDS CH SET, and press ENTER. BRIGHT AUTO CLOCK SLEEP PIC. FLIP 6 Press c/d to select AUTO or RETURN MANUAL. EDS CH SET [AUTO ] ENTER DISPLAY MENU EDS CH [––– ] START AUDIO ENTER/ MUTE ONLY CC TV/VIDEO a/b/c/d FLASH- BACK 7 Press a/b to move the cursor to VOL CH START, and press ENTER. ENTER MENU ADJUST : ENTER : EXIT: MENU PLEASE WAI T NOW SEARCH I NG T IME If you do not know th
Résumé du contenu de la page N° 20
SETTING THE CLOCK (Continued) MANUAL CLOCK Setting If there are no channels with EDS signals, set the clock manually using MANUAL CLOCK. 1 Press MENU to display the MENU MENU SLEEP TIMER screen. AV ADJUST BRIGHT PRESET SLEEP PIC. FLIP CLOSED CAPTION 2 Press a/b to move the cursor to V–CHIP BLOCK SET UP, and press ENTER. ENTER SET UP DISPLAY MENU ENTER/ AUDIO MUTE CC TV/VIDEO ONLY a/b/c/d 3 Press a/b to move the cursor to SET UP FLASH- BACK RETURN CLOCK, and press ENTER. VOL CH BLUE SCREEN [OFF]
