Résumé du contenu de la page N° 1
-
LC 45GD4U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE CRISTAL LIQUIDO
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
ESPAÑOL FRANÇAIS ENGLISH
Résumé du contenu de la page N° 2
LC-45GD4U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL • The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from the actual operations. • Some items may be grayed out. They are not selectable. IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the Serial No.: TV. IMPORTANT INFORMATION WARNING:TO REDUCE
Résumé du contenu de la page N° 3
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RE
Résumé du contenu de la page N° 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Instructions carefully before using this product. IMPORTANT SAFETY INSTRUCTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety.
Résumé du contenu de la page N° 5
IMPORTANT SAFETY INSTRUCTIONS • Water and Moisture — Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommen
Résumé du contenu de la page N° 6
IMPORTANT SAFETY INSTRUCTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of
Résumé du contenu de la page N° 7
Contents IMPORTANT INFORMATION ………………………1 Setting Slide Show …………………………… 46 DEAR SHARP CUSTOMER …………………………3 My Program …………………………………… 46 IMPORTANT SAFETY INSTRUCTIONS ……………3 Audio Select …………………………………… 46 Contents ………………………………………………6 Protecting/unprotecting still image files …… 47 Trademarks ……………………………………………7 Deleting a still image file ……………………… 47 COPYRIGHT AND LICENSE NOTICE ……………7 Deleting all still image files …………………… 47 Supplied accessories ………………………………8 Recording a motion picture ………………
Résumé du contenu de la page N° 8
Contents Closed caption ………………………………… 74 Caption Size ……………………………… 75 Font Style …………………………………… 75 Foreground Color ………………………… 76 Foreground Opacity ……………………… 76 Background Color ………………………… 76 Background Opacity ……………………… 77 Character Edge …………………………… 77 Secret number setting for parental control (AV input mode only) ……………………… 78 Parental control (setting V-CHIP level) ……… 80 How to temporarily release the V-CHIP BLOCK ……………………… 84 Reactivating the temporarily released V-CHIP BLOCK …………………………… 8
Résumé du contenu de la page N° 9
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (g1) “AAA” size battery (g2) AC cord (g1) RRMCGA264WJSA QACCDA036WJPZ Page 16 Page 13 Page 10 RF cable (g1) Cable clamp (g1) Operation manual (g1) LC-45GD4U QCNW-A342WJZZ or QCNWGA061WJZZ LHLDW0110CEZZ Pages 18 and 19 Page 10 TINS-B693WJZZ Bracket unit (g2) Speaker unit (g1) * * * * Left speaker Right speaker GCOVAB054WJKB DSP-ZA087UJ01 DSP-ZA087UJ02 Page 11 Page 11 Page 11 * The parts num
Résumé du contenu de la page N° 10
Preparation Where to place the TV First select the location where to place the TV. 1 Selecting the location of the TV • Select a place with good ventilation. Display 2 Setting the TV in place Handling the Display CAUTION • Do not remove the stand and speaker from the Display unless using an optional bracket to mount it. • Keep enough space above and behind the Display. • When you move the TV, carry it by two or more people. • When you move the Display, hold the portion of the Display, not the sp
Résumé du contenu de la page N° 11
Preparation Setting the TV After putting the Display in place, connect the AC cord. Use the cable clamp for bundling the cables. Removing the terminal cover 1 Display (rear view) Press down the hooks to remove the cover toward you. 2 Connecting the AC cord to the Display AC cord (with Ferrite core) 3 Bundling the cables with the clamp Cable clamp Insert the cable clamp in the hole on the Display as shown. CAUTION • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES
Résumé du contenu de la page N° 12
Preparation Attaching speakers 1 5 Remove the terminal cover as shown in the illustration. Attach the speaker terminal cover. 2 6 Insert the projecting bulges on the side of the Align nub of the bracket with the groove and slot it speakers into the corresponding slots in the display. into place. Screw 3 7 (SILVER) Screw (BLACK) Fasten the screw. Fasten the bracket with the screw. 4 8 Connect the ends of the cable to the speaker Attach the terminal cover as shown in the terminals as shown in the
Résumé du contenu de la page N° 13
Preparation Removing the stand Before detaching (or attaching) stand, unplug the AC cord from the AC input terminal. CAUTION • Do not remove the stand from the Display unless using an optional wall mount bracket to mount it. Before attaching/detaching stand • Before performing work make sure to turn off the TV. • Before performing work spread cushioning over the base area to lay the Display on. This will prevent it from being damaged. 2 1 Unfasten the four screws used to secure the Detach the st
Résumé du contenu de la page N° 14
Preparation Inserting the batteries If the remote control fails to operate Liquid Crystal Television functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AAA” size batteries 3 Close the battery cover. (supplied with the product). • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instr
Résumé du contenu de la page N° 15
Part names Display INPUT VOLUME buttons button (VOLl/k ) CHANNEL buttons POWER (CHs/r) button Remote control sensor CARD indicator OPC indicator OPC sensor POWER indicator * OPC: Optical Picture Control (see page 34.) 14
Résumé du contenu de la page N° 16
Part names Display INPUT 3 terminals CableCARD i.LINK slot terminals DIGITAL IN MONITOR OUTPUT terminal terminals INPUT 1 terminals INPUT 2 terminals AC INPUT DIGITAL RESET* terminal AUDIO SYSTEM RESET** OUTPUT CENTER terminal CHANNEL INPUT terminal RS-232C INPUT 5 terminal EXTERNAL terminals INPUT 4 terminal SPEAKER terminals DC OUTPUT terminal (Terminal for expanded functionality in the near future.) ANALOG A IN terminal ANALOG A OUT terminal ANALOG B IN terminal * Press RESET if the system ca
Résumé du contenu de la page N° 17
Part names 1 TV POWER: Switches the Liquid Crystal Television Remote control unit power on or Standby. (See page 20.) 2 DISPLAY: Displays the channel information. 117 3 SOURCE POWER: Turns the power of the external equipment on and off. 4 External equipment operational buttons: Operates the external equipment. 50 – 9: Sets the channel. 2 6 A-ANALOG-B: Each button selects the corresponding 18 3 antenna. k k l l 7VOL k k k/l l l: Sets the volume. (See page 23.) 4 8 CARD: Switches to card mode. 19
Résumé du contenu de la page N° 18
Watching TV Simple operations for watching a TV program Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. F-type connector 1. A 75-ohm system is generally a round cable with F-type connector that can easily be attached to a terminal without tools (Co
Résumé du contenu de la page N° 19
Watching TV Cable TV/VCR connection (continued) A-2. Connecting with cable converter using AUX terminals for audio and video output. (If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as shown in example A-1.) Coaxial Antenna Cable (commercially available) Coaxial Antenna Cable RF Cable (Supplied) (commercially available) Video Cable Audio Cable Signal splitter (commercially available) (commercially available) Coaxial Antenna Cable (commercially a
Résumé du contenu de la page N° 20
Watching TV C. Connecting Antenna Cable with VCR Coaxial Antenna Cable (commercially available) RF Cable (Supplied) Coaxial Antenna Cable (commercially available) Signal splitter (commercially available) Audio Cable (commercially available) Cable lead-in Video Cable (commercially available) VIDEO AUDIO OUT IN VCR NOTE • Be sure to remember what kind of connection is made with your TV. • Shown here is the preferred method of connecting a VCR to your TV if you are in an area with good signal rec
