Résumé du contenu de la page N° 5
IMPORTANT SAFETY PRECAUTIONS • Cleaning — Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. • Water and Moisture — Do not use this product near water – for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. • Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause th
Résumé du contenu de la page N° 6
IMPORTANT SAFETY PRECAUTIONS • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, Iocation of a
Résumé du contenu de la page N° 7
Contents IMPORTANT INFORMATION ………………………1 Using external equipment ……………………… 41 DEAR SHARP CUSTOMER …………………………3 Watching a DVD image ……………………… 42 IMPORTANT SAFETY PRECAUTIONS ……………3 Connecting a DVD player ………………… 42 Contents ………………………………………………6 Displaying a DVD image ………………… 42 Supplied accessories ………………………………7 Watching a VCR image ……………………… 43 Preparation ……………………………………………8 Connecting a VCR ………………………… 43 Attaching the speakers …………………………8 Displaying a VCR image ………………… 43 Where to place the S
Résumé du contenu de la page N° 8
Supplied accessories Make sure the following accessories are provided with the product. Remote control unit (g1) “AA” size Alkaline battery (g2) Cable clamp (Large g1, Small g2) TV CBL VCR DVD TV /SAT /LD /DTV POWER ANT-A/B INPUT AV FRONT MODE SURROUND MTS CC TWIN PICTURE SELECT VIEW SUB TWIN CH MODE FREEZE INPUT DISPLAY SLEEP EDIT/ LEARN 12 3 45 6 78 9 0 100 ENT FLASHBACK VOL CH MUTE MENU TV/SAT/DVD DTV/DVD TOP RETURN MENU MENU SOURCE DTV/SAT POWER GUIDE SET/ ENTER DTV/SAT INFO VCR REC FAVO
Résumé du contenu de la page N° 9
Preparation Attaching the speakers The supplied speaker unit can be attached to or detached from the Display. It must be attached unless you use external amplifier/speakers. Before attaching (or detaching) speakers, unplug the AC cord from the AC outlet. Be sure to attach or detach the speakers with two or more people. Example: Attaching right speaker. 123 Speaker Hole plug Hole Bulge Bulge Insert the speaker plug into the Take hold of the speaker and Fasten the screws to secure the terminal on
Résumé du contenu de la page N° 10
Preparation Where to place the System “System” means the Display and AVC System. First select the location where to place the System. 1 Selecting the location of the System • Select a place with no direct sunlight and good ventilation. • The Display and the AVC System are connected by the system cable. (See page 10 for details.) System cable AVC System If you want to keep a longer distance between Display the Display and AVC System, please purchase the optional system cable AN-07SC1 (about 23 fe
Résumé du contenu de la page N° 11
Preparation Setting the System After putting the Display and the AVC System in place, connect the system cables and AC cords. Use the cable clamps for bundling the cables. Removing the terminal cover 1 Display (rear view) Press the two hooks toward the center of the Display and remove the cover toward you. Press down the two upper hooks to remove the cover toward you. 2 Connecting the system cable and the AC cord to the Display DISPLAY INPUT1 DISPLAY INPUT2 (WHITE) (GRAY) Connect the plug into C
Résumé du contenu de la page N° 12
Preparation 4 Attaching the clamps and bundling the cables with the clamp Cable clamp (Large) Cable clamp (Small) Insert the cable Peel off the seal clamp in the hole on the back and on the Display leg attach as shown. as shown. Display (rear view) NOTE • The small clamp on the right is used for bundling external speakers. (See page 56.) 5 Closing the terminal cover Cables come out from the small opening. 11
Résumé du contenu de la page N° 13
Preparation Setting the Display on the wall Using an optional bracket to mount the Display • You can ask a qualified service personnel about using an optional AN-37AG1 bracket to mount the Display to the wall. • Carefully read the instructions that come with the bracket before beginning work. Hanging on the wall AN-37AG1 wall mount bracket. (See the bracket instructions for details.) Vertical mounting Angular mounting CAUTION • Installing the Liquid Crystal Television requires special skill that
Résumé du contenu de la page N° 14
Preparation Inserting the batteries If the remote control fails to operate Liquid Crystal Television functions, replace the batteries in the remote control unit. 1 Open the battery cover. 2 Insert two “AA” size Alkaline 3 Close the battery cover. batteries (supplied with the product). _ + + _ • Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment. CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to
Résumé du contenu de la page N° 15
Part names Display VOLUME buttons INPUT MAIN POWER (VOLl/k ) button button CHANNEL buttons POWER button (CHs/r) Remote control sensor OPC sensor OPC indicator* *OPC: Optical Picture Control (See pages 38 and 40.) POWER indicator 14
Résumé du contenu de la page N° 16
Part names AVC System Headphone PC INPUT terminal (AUDIO) (When connecting headphones, the sound from the speakers is muted.) Front view PC INPUT terminal (ANALOG RGB) How to open the door. INPUT 4 terminals (AUDIO L/R) STANDBY/ON indicator INPUT 4 terminal (VIDEO) CLEAR* MAIN POWER button INPUT 4 terminal (S-VIDEO) * If the AVC System is switched on but it does not appear to be operating correctly, it may need resetting. In this case, press CLEAR, shown in the diagram, lightly with the end of a
Résumé du contenu de la page N° 17
Part names 1TV POWER: Switch the Liquid Crystal Television power Remote control unit on or off. (See page 21.) 2 FRONT SURROUND: Set SRS* and FOCUS* Sound System mode. (See page 25.) 24 25 3 AV MODE: Select an audio or video setting. (See 1 12 13 14 page 52.) (AV mode: STANDARD, DYNAMIC, MOVIE, GAME, USER. PC 2 TV CBL VCR DVD TV /SAT /LD 15 mode: STANDARD, USER.) /DTV POWER ANT-A/B INPUT 4 VIEW MODE: Select the screen size. (See pages 52 AV FRONT MODE SURROUND MTS CC 3 16 and 53.) TWIN PICTURE
Résumé du contenu de la page N° 1
OPERATION MANUAL MODE D’EMPLOI
LC-37HV4U
MANUAL DE OPERACIÓN MANUAL DE OPERAÇÃO
-
LC 37HV4U
LIQUID CRYSTAL TELEVISION
TÉLÉVISEUR ACL
TELEVISOR CON PANTALLA DE
CRISTAL LIQUIDO
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
MODE D’EMPLOI
SHARP ELECTRONICS CORPORATION
MANUAL DE OPERACIÓN
Sharp Plaza, Mahwah, New Jersey 07430-2135
MANUAL DE OPERAÇÃO
SHARP CORPORATION
Printed in Japan
Imprimé au Japon
Printed on post-consumer recycled paper. Impreso en Japón
Imprimé sur du papier recyclé. Impresso no
Résumé du contenu de la page N° 2
LC-37HV4U LIQUID CRYSTAL TELEVISION ENGLISH OPERATION MANUAL IMPORTANT: Model No.: To aid reporting in case of loss or theft, please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear of the Serial No.: TV. IMPORTANT INFORMATION WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. The lightning flash with arrow-head symbol, within an equilateral CAUTION triangle, is intended to alert the user to the
Résumé du contenu de la page N° 3
IMPORTANT INFORMATION CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. CAUTION: DO NOT PLACE THIS PRODUCT ON AN UNSTABLE CART, STAND, TRIPOD, BRACKET, OR TABLE. THE PRODUCT MAY FALL CAUSING SERIOUS PERSONAL INJURY AND SERIOUS DAMAGE TO THE PRODUCT. USE ONLY WITH A CART, STAND, TRIPOD, BRACKET, OR TABLE RECOMMENDED BY THE MANUFACTURER OR SOLD WITH THE PRODUCT. FOLLOW THE MANUFACTURER’S INSTRUCTIONS WHEN INSTALLING THE PRODUCT AND USE MOUNTING ACCESSORIES RE
Résumé du contenu de la page N° 4
DEAR SHARP CUSTOMER Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years of trouble-free operation of your product, please read the Important Safety Precautions carefully before using this product. IMPORTANT SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. Ho
Résumé du contenu de la page N° 18
Watching TV Simple operations for watching a TV program Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the AVC System. NOTE • The antenna and the cable converter cannot be connected at the same time. F-type connector 1. A 75-ohm system is generally a round ca
Résumé du contenu de la page N° 19
Watching TV Cable converter/VCR connection (continued) A-2. Connecting with cable converter using AUX terminals for audio and video output. (If your cable TV converter has both RF OUTPUT and AUX terminals, it is recommended to connect it as shown in example A-1.) RF Cable Coaxial Antenna Cable (commercially available) (Supplied) 2-way signal splitter Rear Terminals (not OUT IN supplied) Cable lead-in VIDEO AUDIO Cable TV converter (not supplied) VCR S-VIDEO VIDEO AUDIO OUT IN Video Cable (com
Résumé du contenu de la page N° 20
Watching TV C. Connecting Antenna Cable with VCR RF Cable Coaxial Antenna Cable (commercially available) (Supplied) Rear Terminals 2-way signal splitter (not supplied) Cable lead-in Coaxial Antenna Cable (commercially available) VCR S-VIDEO VIDEO AUDIO OUT IN Video Cable (commercially available) Audio Cable (commercially available) S-video Cable (commercially available) NOTE • Be sure to remember what kind of connection is made with your System. • Shown here is the preferred method of connectin
