Résumé du contenu de la page N° 1
SyncMaster UD46A, UD55A
LCD Display
User Manual
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Résumé du contenu de la page N° 2
Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property damage. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Note Important to read and under- Prohibited stand at all times Disconnect the plug from the Do not disassemble outlet Ground to prevent an electric Do not
Résumé du contenu de la page N° 3
Safety Instructions Do not touch the power plug with wet hands when removing or plug- ging the plug into the outlet. • Otherwise, this may result in electric shock. Make sure to connect the power cord to a grounded power outlet. • Otherwise, it may result in electric shock or personal injury. Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material
Résumé du contenu de la page N° 4
Safety Instructions Ensure that at least two persons lift and move the product. • Otherwise, it may be dropped and cause personal injury, and/or dam- age the product. When installing the product in a cabinet or rack, make sure that the front end of the bottom of the product does not project out. • Otherwise, it may fall or cause personal injury. • Use a cabinet or rack of a size appropriate to the product. DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIGA- RETTES AND ANY HEATING APPLIANCES NEAR
Résumé du contenu de la page N° 5
Safety Instructions Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft cloth. Do not spray cleaner directly onto the surface of the product. • Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off. When cleaning the power plug pins or dusting the power outlet, clean it with a dry cloth. • Otherwise, it may result in fire. When cleaning the product, make sure to disconnect
Résumé du contenu de la page N° 6
Safety Instructions When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. • Otherwise, this may result in electric shock or fire. If thunder or lightning is occurring, do not touch the power cord or antenna cable. • Otherwise, this may result in electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. • Otherwise, it may fall and result in electric shock, damage to the product or
Résumé du contenu de la page N° 7
Safety Instructions When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor for one (1) hour. This reduces eye fatigue. Do not install it in an unstable location such as an unstable rack or uneven surface or a location exposed to vibrations. • Otherwise, it may fall and cause personal injury and/or damage
Résumé du contenu de la page N° 8
Safety Instructions Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time. • Otherwise, the batteries may be damaged or cause fire, personal in- jury or damage due to a leakage of the internal liquid. The batteries (and rechargeable batteries) are not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling. • The customer can return used or r
Résumé du contenu de la page N° 9
Safety Instructions Do not put any heavy objects on the product. • This may result in personal injury and/or damage to the product. Precautions when handling the panel Do not stand the product as shown in the image. The panel is fragile and can get damaged. Lay the product down to handle it as shown in the image. (the packaging can be used). Ensure you use the handles on the back when moving the product. Do not hold or grasp any area of the product within 15mm from the front.
Résumé du contenu de la page N° 10
Introduction Package Contents Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by Check the contents of the Remove the styrofoam and holding the grooves on both package. vinyl cover. sides of the package box. Note • After unpacking the package, make sure to check the contents of the package. • Store the packaging box in case you need to move the product later. • If any items are missing, contact your dealer. • Conta
Résumé du contenu de la page N° 11
Introduction Manuals Quick Setup Guide Warranty Card User Manual (Not available in all loca- tions) Cables Power Cord D-Sub Cable Others Remote Control Batteries (AAA X 2) Holder Guide(4EA) (BP59-00138B) (Not available in all loca- (For Video Wall) / tions) Screw (8EA) Holder-Ring (4EA) / Screw (1EA) Bracket decoration Screw (4EA) (For function knob) (top, bottom, Left, Right) Screw (16EA) Sold separately Semi Stand KIT Wall Mount KIT TV Tuner Box (US Only)
Résumé du contenu de la page N° 12
Introduction Sold separately RGB to BNC Cable RGB to Component Cable Network Box HDMI to HDMI Cable Stereo Cable AV Cable DP Cable Note Accessories that can be purchased with the product vary by country. Your LCD Display Function knob The function knob has a remote-control sensor, a light sensor and function keys. If mounting the display onto a wall, you can move the function knob to the side of the display. Remote Control Sensor Aim the remote control towards this spot on the LCD Display.
Résumé du contenu de la page N° 13
Introduction Automatically detects the intensity of ambient light around a selected display and adjusts the screen brightness. Note It works when you use the MDC program. Power indicator Shows mode by blinking green Note See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your LCD Display OFF when it is not needed or when leaving it unattended for long periods. POWER button Use this button for turning the LCD Display on
Résumé du contenu de la page N° 14
Introduction Attaching the function knob to the display • The function knob can be attached to any screw hole on the display. • Align the screw holes of the display and function knob. Next, fasten using the screw. Note Using a screw other than the one supplied can damage the display. Detaching the function knob Hold the area marked in the Push the areas marked. Hold the areas marked, and picture. lift the function knob. Rear Note See the "Connections" section for details about cable connection
Résumé du contenu de la page N° 15
Introduction • Connect a monitor to another monitor through a DVI, DVI to HDMI cable. • Connect a DVI or DVI-HDMI cable to [DVI OUT (LOOPOUT)] on the product and [DVI IN] or [HDMI IN] on another monitor. • HDMI and network signals sent via the [DVI OUT(LOOPOUT)] port are displayed on the second display which has the [DVI IN] port. Note • The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI] on another disp
Résumé du contenu de la page N° 16
Introduction Receives a signal from the Display port. Connect a DP cable to [DP IN] on the product and DP IN on another display. AV/COMPONENT AUDIO IN [R-AUDIO-L] Connect the [AV/COMPONENT AUDIO IN [R- AUDIO-L]] port on the monitor to the audio output port on the PC or on the external device using an audio cable. AV IN Connect the [AV IN] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AUDIO OUT Connect a headphone or an External speaker. D
Résumé du contenu de la page N° 17
Introduction • Up to HDMI 1.3 can be supported. Note The MAGICINFO OUT port must be connected to the [HDMI IN 2 (MAGICINFO)] port. RJ 45 MDC (MDC PORT) MDC(Multiple Display Control) Program Port Connect the LAN cable to [RJ45 MDC] on the product and LAN on the PC. To use an MDC, the MDC program must be installed on the PC. Note Go to Multi Control and select RJ45 MDC as the MDC Connection. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port Connect a serial cabl
Résumé du contenu de la page N° 18
Introduction Kensington Lock slot An anti-theft lock allows you to use the product securely even in public places. The locking de- vice shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock the product, follow these steps: 1. Fix the cable of your anti-theft locking de- vice to a heavy object such as a desk. 2. Put one end of the cable through the loop on the other end. 3. Insert the locking device into the
Résumé du contenu de la page N° 19
Introduction POWER OFF Number Buttons / GUIDE button + VOL - SOURCE D.MENU TOOLS Up-Down Left-Right buttons INFO The Color button and the PC/DVI/HDMI/DP selection button TTX/MIX MTS/DUAL ENTER/PRE-CH MUTE CH/P TV MENU RETURN EXIT MagicInfo Turns the product On. POWER Turns the product Off. OFF Used to enter the password during the OSD adjustment or to use Number Buttons MagicInfo. Press to change the channel. The "-" button is used to select Digital channels. / GUIDE button E
Résumé du contenu de la page N° 20
Introduction Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at the time. DTV menu display D.MENU - This function does not work for this LCD Display. Use to quickly select frequently used functions. TOOLS - This function does not work for this LCD Display. Moves from one menu item to another horizontally, vertically or Up-Down Left-Right but- adjusts selected menu values. tons Current picture information is displayed on the upper left corner
