Instruction d'utilisation Ariens 920014

Résumé du contenu de la page N° 1

Date: 10/17/2012 No. N-2033R2
Product Notice
Ariens Company
655 W. Ryan St. – Revised –
Brillion, WI 54110
www.ariens.com
Product Family: Ariens 920014 Sno-Thro Models with Briggs & Stratton Engines
Subject: Inspect and Repair Units Before Sale
Dealer Action: SALES HOLD – Do not sell units below until repair is complete
Safety Notice: Sales Hold
Briggs & Stratton Company has notified Ariens Company of a potential engine safety concern on certain
920014 Ariens Sno-Thro models with serial num

Résumé du contenu de la page N° 2

BRIGGS & STRATTON SERVICE NOTIFICATION TO: ALL ARIENS SNOWTHROWER SERVICE ACCOUNTS DATE: OCTOBER 2012 SUBJECT: IMPORTANT NOTICE – CARBURETOR BOWL NUT ENGINE MODEL: 13D137-0110-F1 INSTALLED ON ARIENS SNOWTHROWER ENGINE SERIAL #: 120530 0000 0 THROUGH 1207 1699 999 EQUIPMENT MODEL: ARIENS 920014 SNO-THRO EQUIPMENT SERIAL #: 100,000 THROUGH 11 9, 039 PLEASE GIVE THIS YOUR IMMEDIATE ATTENTION We have received isolated reports of cross-threaded carburetor bowl n

Résumé du contenu de la page N° 3

INSPECTION / CORRECTION For any subject models identified within the serial number ranges above: 1) Remove upper and lower shroud bolts (A, Figure 1) using a 10 mm socket. 2) Remove choke shaft (B) by applying uniform upward pull force. The upper shroud can then be gently lifted upward and set to the side, leaving the primer hose and ignition wires attached. 3) Pull off throttle control knob (C) with uniform outward force. 4) Then, with the fuel shut-off valve in the off position, ca