Résumé du contenu de la page N° 1
BN68-00905A-X0Cover.qxd 4/6/05 2:28 PM Page 1
LCD TV
LE26R51BD
LE26R41BD
-
AFTER SALES SERVICE
LE32R51BD
LE32R41BD
-
Do not hesitate to contact your retailer or service agent if a
change in the performance of your product indicates that a
faulty condition may be present.
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
ON-SCREEN MENUS
PC DISPLAY
PICTURE IN PICTURE (PIP)
TELETEXT
This device is a Class B digital apparatus.
Résumé du contenu de la page N° 2
01 BN68-00905A-X0Eng.qxd 4/6/05 4:05 PM Page 2 Precautions When Displaying a Still Image A still image may cause permanent damage to the TV screen. WARNINGS: Image retention, commonly known as screen burn-in, can occur on most types of television if the same image is displayed continuously. The most common causes of image retention are logos that remain stationary on the TV screen. These logos are common on many programmes received via a Setop Box. To reduce this risk, avoid displaying still i
Résumé du contenu de la page N° 3
01 BN68-00905A-X0Eng.qxd 4/6/05 4:05 PM Page 3 Note : If there are borders around the displayed picture (top or sides), then extended viewing could result in the border leaving a trace image on the screen. Do not leave the screen in pause mode for extended periods of time as you may experience temporary or permanent image burn. Note : If the borders at the left, right and the center of the screen remain fixed for an extended period of time, the amount of light transmission will also remain va
Résumé du contenu de la page N° 4
01 BN68-00905A-X0Eng.qxd 4/6/05 4:05 PM Page 2 Contents CONNECTING AND PREPARING YOUR TV Viewing the Control Panel ............................................................................................................................... 4 Viewing the Connection Panel......................................................................................................................... 5 - Connecting an Aerial or Cable Television Network ..................................................
Résumé du contenu de la page N° 5
01 BN68-00905A-X0Eng.qxd 4/6/05 4:05 PM Page 3 Contents SETTING THE OTHERS Activating the Child Lock ........................................................................................................................ 45 Setting the Blue Screen Mode................................................................................................................ 46 Selecting the Melody ............................................................................................................
Résumé du contenu de la page N° 6
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 4 Viewing the Control Panel - LE26R51BD - LE32R51BD - LE26R41BD - LE32R41BD SOURCE (Power) Press to turn the TV on and off. Displays a menu of all of the available input sources (TV, DTV, Ext.1, Ext.2, AV, S-Video, Component, PC, HDMI). Power Indicator You can also use the SOURCE button on Blinks and turns off when the power is on and the TV’s control panel to make selections. lights up in stand-by mode. MENU Light Detecting Sensor Press to see an
Résumé du contenu de la page N° 7
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 5 Viewing the Connection Panel Power Input Whenever you connect an audio or video system to your set, ensure that all elements are switched off. English-5
Résumé du contenu de la page N° 8
01 BN68-00905A-00Eng.qxd 4/19/05 1:43 PM Page 6 Viewing the Connection Panel Connecting an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: - An outdoor aerial - A cable television network - A satellite network Connecting Component Devices (DVD) - Connect component video cables to component connector (“PR”, “PB”, “Y”) on the rear of your set and the other ends to corresponding component video out
Résumé du contenu de la page N° 9
01 BN68-00905A-00Eng.qxd 4/19/05 1:43 PM Page 7 Viewing the Connection Panel Connecting HDMI/DVI - Supports connections between HDMI-connection-enabled AV devices (set top boxes, DVD players and AV receivers). - No additional sound connection is needed for a HDMI to HDMI link What is HDMI? - HDMI, or high-definition multimedia interface, is a next-generation interface that enables the transmission of digital audio and video signals using a single cable without compression. - “Multimedia inte
Résumé du contenu de la page N° 10
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 8 Viewing the Connection Panel TV Rear Panel CI Card Please insert the card as shown Connecting CI (Common Interface) Card - When not inserting “CI Card” in some channels, “Scramble Signal” is displayed on the screen. - The pairing information containing a telephone number, CI CARD ID, Host ID, and other information will be displayed in about 2~3 minutes. If an error message is displayed, please contact your service provider. - When the channel
Résumé du contenu de la page N° 11
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 9 Viewing the Remote Control (All Functions Except Teletext) Television Standby button DTV MHEG menu display (Refer to page 12) Selects the DTV mode directly Selects the TV mode directly DTV Channel list display Number buttons for direct channel access Electronic Program Guide (EPG) display Previous channel Available source selection Temporary sound switch-off (Refer to page 48) (Refer to page 36) -Next channel -Volume increase -Previous channel -V
Résumé du contenu de la page N° 12
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 10 Viewing the Remote Control (Teletext Functions) Teletext display/Mix both teletext information and he normal broadcast Teletext hold P : Teletext next page P : Teletext previous page Teletext mode selection LIST/FASTEXT (UK) Teletext reveal Teletext index Teletext size selection Teletext sub page Teletext cancel Teletext store Teletext Function : Refer to pages 78-80 for details English-10
Résumé du contenu de la page N° 13
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 11 Installing Batteries in the Remote Control 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the compartment. 3 Replace the cover. Remove the batteries and store them in a cool, dry place if you won’t be using the remote control for a long time. The remot
Résumé du contenu de la page N° 14
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 12 Switching On and Off The mains lead is attached to the rear of your set. If you purchased this set in the United Kingdom, refer to page 91 for further instructions on plug wiring. 1 Plug the mains lead into an appropriate socket. Result: The standby indicator lights up on the front panel. The main voltage is indicated on the rear of your set and the frequency is 50 or 60Hz. 2 Press the POWER button on the front of the panel. Result: The programm
Résumé du contenu de la page N° 15
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 13 Becoming Familiar with the Remote Control The remote control is used mainly to: Change channels and adjust the volume. Set up your set using the on-screen menu system. The following table presents the most frequently used buttons and their functions. Button Viewing Function Menu Function Used to display the - next stored channel. Used to display the - previous stored channel. to Used to display the corresponding channels. For double digit chann
Résumé du contenu de la page N° 16
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 14 Plug and Play When the set is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. 1 If the set is in standby mode, press the POWER button on the remote control. Result: The message Start Plug & Play is displayed. It appears for a little while, and then the message Check antenna input. is displayed with the OK selected. 2 Press the ENTER button. Result: The Auto Store
Résumé du contenu de la page N° 17
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 15 Plug and Play If you want to reset this feature... In the case of DTV mode, Plug&Play can not be selected. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Setup. Press the ENTER button. Result: The options available in the Setup group are displayed. 3 The Plug & Play is selected. 4 Press the ENTER button. Result: The message Start Plug & Play is displayed. 5 For further details on how to set, refer to
Résumé du contenu de la page N° 18
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 16 Storing Channels Automatically You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However, you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available
Résumé du contenu de la page N° 19
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 17 Storing Channels Manually You can store up to 100 channels, including those received via cable networks. When storing channels manually, you can choose: Whether or not to store each of the channels found. The programme number of each stored channel which you wish to identify. 1 Press the MENU button. Result: The main menu is displayed. 2 Press the or button to select Channel. Result: The options available in the Channel group are displayed. 3 Pr
Résumé du contenu de la page N° 20
01 BN68-00905A-X0Eng.qxd 4/6/05 4:06 PM Page 18 Storing Channels Manually 9 If you know the number of the channel to be stored, Press the or button to select Channel and then press the ENTER button. Select C (Air channel) or S (Cable channel) by pressing the or button. Press the button to select channel. Select the required number by pressing the or button and then press the ENTER button. If there is an abnormal sound or no sound, re-select the sound system required. You can also set a chan
