Résumé du contenu de la page N° 1
LCD
Color Television
OWNER’S MANUAL
MODEL: 17LX1R
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached on the back cover and quote this
information to your dealer when you require service.
Internet Home Page : http://www.lge.com
http://www.lg.ca
P/N : 3828TUL315C (0503-REV00)
Printed in Korea
Résumé du contenu de la page N° 2
Warning Warning Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi- cient magnitude to constitute a risk of electric shock to persons.
Résumé du contenu de la page N° 3
Safety Instructions Safety Instructions Safety Instructions WARNING : To reduce the risk of fire or electric shock, DO NOT expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION : These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the oper
Résumé du contenu de la page N° 4
Safety Instructions Safety Instructions continued Safety Instructions continued 12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has b
Résumé du contenu de la page N° 5
Contents Contents Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Picture Menu Options Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3~4 EZ Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17 Manual Picture Control (User option) . . . . . . . .17 Introduction Picture format (ARC) . . . . . . . . . . . . . . . . . . . .17 Controls & Connection Options . . . . . . . . . . . . . .6 Sound Menu Options Remote Co
Résumé du contenu de la page N° 6
Introduction Introduction Introduction Controls & Connection Options Controls & Connection Options CH Channel Buttons VOL Volume Buttons ENTER Enter Button MENU Menu Button TV TV·Video Button VIDEO /I On/Off Button ON/OFF Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode, illuminates green when the set is switched on. VIDEO Input AUDIO Input IN2 () S-Video Input PC Input AC Input Antenna Input Headphone Jack DVD/DTV Input Audio/Video Input PC sound Input 6 R -AUDIO-
Résumé du contenu de la page N° 7
Introduction Remote Control Key Functions Remote Control Key Functions - When using the remote control, aim it at the remote control sensor on the TV. MUTE MULTIMEDIA Switches the sound on or off. Selects: TV, Component or PC mode. TV/VIDEO MUTE POWER Selects: TV, Video1, Video2, S-Video, Component or TV/VIDEO MULTIMEDIA MTS POWER PC mode. FCR EXIT MENU MTS FCR (Refer to p.18) (Refer to p.16) MENU CH ENTER EXIT VOL VOL ENTER CH CH (Channel button) D D / E 123 VOL F / G (Volume button) 456 NUMBE
Résumé du contenu de la page N° 8
Introduction Installation Installation MUTE POWER Accessories Accessories TV/VIDEO MULTIMEDIA MTS FCR EXIT MENU CH ENTER VOL VOL CH 123 456 789 AUDIO VIDEO 0 CC FLASHBK SLEEP ARC 1.5V Power Cord Owner’s Manual AAA Batteries Remote Control PC Sound Cable Polishing cloth PC Signal Cable Tie Holder - Arrange the wires with the tie Holder. Kensington Security System Kensington Security System - The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington
Résumé du contenu de la page N° 9
Installation Installation Instruction Installation Instruction Connection of Connection of TV TV 1 Pull the back cover backside while pushing the two tabs and then lift it up. 2 Connect the antenna cable to the socket marked +75Ω on the back. For the best reception an outdoor antenna should be used. 3 To connect an additional equipment, see the External Equipment Connections section. 4 Connect the power cord. 5 Close the back cover. 1 2 4 ~ 5 Cable Holders Cable Holders - Thread, then pull the
Résumé du contenu de la page N° 10
Installation External Equipment Connections External Equipment Connections Antenna Connection Antenna Connection - For optimum picture quality, adjust antenna direction. Connecting to an Inside Antenna Setup - Typical wall antenna jack used in apartment buildings, connect the antenna cable as shown below. (Use the correct type of antenna cable for the type of wall antenna jack.) Turn clockwise to tighten. 75Ω Round Cable Copper Wire () 300Ω Flat Wire Antenna Converter Antenna Jack Apartment Buil
Résumé du contenu de la page N° 11
Installation External Equipment Connections Continued External Equipment Connections Continued VCR Setup VCR Setup - In Video mode, TV automatically reverts to TV mode if the fcr button or flashbk buttons are pressed. Connection 1 Set VCR switch to 3 or 4 and then tune TV to the same channel number. Connection 2 2 Typical 1. Connect the audio/video output jacks on VCR to the corre- Antennas sponding input jacks on the TV. When connecting the TV to 1 a VCR, match the jack colors (Video = yellow,
Résumé du contenu de la page N° 12
Installation DVD Setup DVD Setup Connections 1. Connect the DVD video outputs to the COMPONENT (Y, PB, PR) jacks and connect the DVD audio outputs to the AUDIO jacks. 2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure. NOTE: If your DVD player does not have component video output, use S-Video. Viewing Setup 1. Turn on the DVD player, insert a DVD. 2. Use the TV/VI
Résumé du contenu de la page N° 13
Installation PC Setup PC Setup - After setup, be sure to select PC source on TV. Connections 1. Set the monitor output resolution on the PC before connecting to the TV. 2. Connect the TV to the PC with the PC cable. 3. Connect the PC audio output to the TV's PC SOUND input. Viewing Setup 1. Turn on the PC. 2. Use the TV/VIDEO or MULTIMEDIA button on the remote control to select PC. Monitor Display Specifications Horizontal Vertical MODE Resolution Frequency(kHz) Frequency(Hz) 31.4 60 VGA 640x48
Résumé du contenu de la page N° 14
Operation Operation Operation PC Menu Options PC Menu Options - After setup, be sure to select PC source to see the PC image on TV screen. PC H-Position 85 V-Position Clock Phase Auto Configure Reset D FG OK MENU E 1. Press the MENU button and then use button to select the PC menu. D / E 2. Press the G button and then use button to select desired item. D / E 3. Use the F / G button to make appropriate adjustments. • H-position/V-position Adjusts picture left/right and up/down. The adjustment
Résumé du contenu de la page N° 15
Operation TV Operation Overview TV Operation Overview 1. First, make all equipment connections. Plug the AC Adapter into the TV, then plug the AC Adapter into a power outlet. At this time, the TV is switched to standby mode. • In standby mode, press the POWER, CH ( ), TV/VIDEO, MULTIMEDIA or NUMBER button on the D,E remote control or ON/OFF, CH (D,E), TV/VIDEO located on the TV to turn the TV on. 2. Select the viewing source by pressing TV/VIDEO or MULTIMEDIA repeatedly. • Note: See page 17 if y
Résumé du contenu de la page N° 16
Operation Channel Menu Options Channel Menu Options Memorizing the Channels with EZ Scan Memorizing the Channels with EZ Scan - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming sig- nals either over-the-air or from a cable-type service provider. Channel 1. Press the MENU button and then use button to select the Channel menu. D /E EZ Scan To start Manual prog. 2. Press the G button and then use button to select EZ Scan. D / E Fa
Résumé du contenu de la page N° 17
Operation Picture Menu Options Picture Menu Options EZ Video EZ Video - This function adjusts the TV for the best picture appearance. 1. Press the VIDEO button repeatedly to select the picture appearance setup option as shown below. Clear Optimum Soft User • You can also adjust EZ Video in the Picture menu. • Clear, Optimum and Soft are preset for good picture quality at the factory and cannot be changed. Manual Picture Control ( Manual Picture Control (User option) option) - You can adjust pict
Résumé du contenu de la page N° 18
Operation Sound Menu Options Sound Menu Options EZ Audio EZ Audio - This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate sound option based on the program content. 1. Use the AUDIO button to select the appropriate sound setup as shown below. Flat Music Movie Sports User • You can also adjust EZ Audio in the Sound menu. Equalizer Equalizer Adjustments Adjustments 1. Press the MENU button and then use but- D / E Sound ton to select the S
Résumé du contenu de la page N° 19
Operation Timer Menu Options Timer Menu Options Auto Clock Setup Auto Clock Setup - The time is set automatically through from a PBS broadcast signal. - The PBS channel signal includes information for the correct time and daylight saving time. Timer Auto Clock Clock Auto G Time zone Auto Off timer Manual PBS Ch. TV 1 On timer D.S.T. Auto Auto off D FG Move Adjust  Exit D E FG OK MENU E 1. Press the MENU button and then use button to select the Timer m
Résumé du contenu de la page N° 20
Operation On/Off Timer Setup On/Off Timer Setup - Timer function operates only if current time is set. - Off-Timer function overrides On-Timer function if they are set to the same time. - The TV must be in standby mode for the On-Timer to work. - If you don’t press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically revert to standby mode. 1. Press the MENU button and then use D / E button to select the Timer Timer menu. Clock Off timer 2. Pres
