Résumé du contenu de la page N° 1
15” LCD TV
OWNER'S MANUAL
Résumé du contenu de la page N° 2
SAFETY PRECAUTIONS WARNING: TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER RISK OF ELECTRIC SHOCK DO NOT OPEN SERVICING TO QUALIFIED PERSONNEL. RISQUE DE CHOC ÉLECTRIQUE NE WARNING: TO PREVENT FIRE OR SHOCK AVIS PAS OUVRIR HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT PLACE OBJECTS * SEE REAR OF UNIT FOR GRAPHIC SYMBOLS * FILLED WITH LIQUIDS ON OR NEAR THIS UNIT. The lightning flash with an arrowhead within a t
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 13.Unplug this apparatus during lightning storms or when unused for 2. Keep these instructions. long periods of time. 3. Heed all warnings. 14. Refer all servicing to qualified 4. Follow all instructions. service personnel. Servicing is 5. Do not use this apparatus near water. required when the apparatus has 6. Clean only with a dry cloth. been damaged in any way, such as 7. Do not block any ventilation power-supply cord or plug is openin
Résumé du contenu de la page N° 4
TABLE OF CONTENTS SAFETY PRECAUTIONS ...................................................................................... 2 IMPORTANT SAFETY INSTRUCTIONS ............................................................... 3 REMOTE CONTROL ........................................................................................... 5 ACCESSORIES ..................................................................................................... 5 REMOTE CONTROL REFERENCE GUIDE ......................
Résumé du contenu de la page N° 5
REMOTE CONTROL USING THE REMOTE CONTROL Point the remote control at the REMOTE SENSOR located on the unit. When using this unit in very bright light, the infrared REMOTE CONTROL SENSOR may not work properly. The recommended effective distance for using the remote control is about 16 feet (5 meters). TO CHANGE THE REMOTE CONTROL BATTERY 1. Open the battery door. 2. Insert two “AAA” batteries. BATTERY REPLACEMENT When the batteries become weak, the operating dis
Résumé du contenu de la page N° 6
REMOTE CONTROL REFERENCE GUIDE 4) PICTURE Button Press to select from preset screen display settings to match the type of show you are watching (Standard, Dynamic, Personal, Soft & Movie) 5) DISPLAY Button Press to change disc status information displayed on the screen. 6) CURSOR ( , , , ) Buttons Press to highlight selections on a menu screen and adjust certain settings. CH+/CH– Button Press CH+/CH– to change the TV channels. VOLUME (–/+) Buttons Press to adjust the volume level. 7) TV Button P
Résumé du contenu de la page N° 7
UNIT REFERENCE GUIDE 3 17 4 5 6 7 89 10 1314 16 11 12 15 1) Color LCD Screen 4) Removable Base Stand 2) STANDBY/ON Button 5) DC IN 12V Turns the unit on and off. 6) AV OUT Video Output Jack MENU Button 7) AV OUT Audio Output Jacks Enters and exits the TV menu. (Left/Right) FUNCTION Button 8) AV IN Video Input Jack Selects TV, AV IN, YUV IN or PC IN. – VOL + Controls 9) AV IN Audio Input Jacks (Left/Right) Adjusts the volume level and highlight 10) PC IN MONITOR/VGA Jack selections (Left & Right)
Résumé du contenu de la page N° 8
CONNECTIONS CONNECTING A TV ANTENNA/CABLE/SATELLITE To view television channels correctly, a signal must be received from one of the following sources: - An indoor or outdoor aerial antenna - A cable system - A satellite system Connecting a Digital Antenna The tuner in this TV receives ATSC TV signals from an antenna. This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts. Satellite, Cable, or TV antenna cable to TV ANTENNA CABLE Terminal (cable not includ
Résumé du contenu de la page N° 9
CONNECTIONS CONNECTING TO A/V DEVICES (VCR, PVR, Camcorder, Game System, etc.) Connecting to Devices with an S-Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit (Audio cable not included). Connect the S-VIDEO output from the VCR to the S-VIDEO input on this unit (S-VIDEO cable not included). Make sure you connect both audio and video from t
Résumé du contenu de la page N° 10
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Output To connect to A/V devices such as a VCR or camcorder: - Connect to a VCR Connect the right (red) and left (white) audio output from the VCR to the right (red) and left (white) input on this unit. Connect the video (yellow) output from the VCR to the video input on this unit. Make sure you connect both audio and video from the same VCR to the same input (AV IN). Note: Please refer to the user manual for the VCR for
Résumé du contenu de la page N° 11
CONNECTIONS Connecting to Devices with a Composite (yellow RCA-type) Video Input To connect to A/V devices such as a VCR, PVR or camcorder: - Connect to a VCR/PVR Connect the right (red) and left (white) audio input from the VCR/PVR to the right (red) and left (white) output on this unit. Connect the video (yellow) input from the VCR/ PVR to the video output on this unit. Make sure you connect both audio and video from the same VCR/PVR to the same output (AV OUT). Note: Please refer to the user
Résumé du contenu de la page N° 12
CONNECTIONS CONNECTING A HIGH-DEFINITION (HD) SOURCE High-Definition (HD) Devices with component video output must be connected to the YUV input. Connect the three video outputs (Y, Pb, Pr) from the source to the corresponding video inputs on this unit (Component video cable not included). Connect the right (red) and left (white) audio output from the source to the right (red) and left (white) input on this unit (Audio cable not included). Make sure you connect both audio and video from the same
Résumé du contenu de la page N° 13
POWER SUPPLY USING THE CAR POWER ADAPTER The included car power adapter allows the unit to be used with vehicles that have a 12V, negative ground electrical system. Cautions: Use the provided car power adapter only. Use with other car power adapters could damage the unit. The car power adapter included with this unit is for its use only. Do not use it with other equipment. In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle. Make sure the un
Résumé du contenu de la page N° 14
INSTALLATION REMOVING THE BASE STAND WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the front of the unit at any time because the screen could crack. 1. Disconnect any cables or cords connected to the unit. 2. Lay the unit down on a flat surface, so the backside is facing up, making sure to place a s
Résumé du contenu de la page N° 15
USING HEADPHONES Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level. When headphones are connected, no sound will come from the front speakers. Note: Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss. Earphones / Headphones (1/8” [3.5mm] diameter plug) UNIT OPERATION TURNING THE UNIT ON FOR THE FIRST TIME The first time for you turning on the unit, the unit wi
Résumé du contenu de la page N° 16
TV SETUP VIDEO MENU 1. Press the MENU button. 2. Press the ENTER or button to select Video. 3. Use the or button to select the options (Picture Mode, Brightness, Contrast, Saturation, Tint, Sharpness or Color Temperature). Adjust them using the or button (The screen will change to your desired setting); or press the ENTER or button to go into the detailed settings. 4. Press the EXIT button to return to the previous menu. 5. Repeat steps 3 and 4 to adjust other options. 6. To exit the MAIN
Résumé du contenu de la page N° 17
TV SETUP VGA Settings in PC Mode Use the or button to select the options (Auto Adjust, H. Position, V. Position, Phase or Clock). Adjust them using the or button. The screen will change to your desired setting. button to confirm Auto Adjust.) (Press the ENTER or - Resolution : 1,024 x 768 max - Refresh Frequency : 60Hz max Video Auto Adjust H. Position 50 H. Position : Center the image by moving it Audio V. Position 50 left or right. Phase 3 Setup V. Position : Center the image by moving
Résumé du contenu de la page N° 18
TV SETUP TV MENU (For TV Mode Only) 1. Press the MENU button. 2. Use the or button to select TV. Press the Video Tuner Mode Cable Auto Scan ENTER or button to go into the TV settings. Audio Auto Scan Add CH 3. Use the or button to select the options Channel Skip TV (Tuner Mode, Auto Scan, Add Channel, Channel MTS Stereo Setup Audio Language English Skip, MTS or Audio Language). Adjust them using the or button (The screen will change to Parental your desired setting); or press the ENTER or
Résumé du contenu de la page N° 19
TV SETUP TV MODE AV / YUV MODE Video OSD Language English Video OSD Language English Time Setup Time Setup Audio Audio Caption Caption Restore setting Restore setting TV Setup Setup Parental Parental Setup Select EXIT Exit Setup Select EXIT Exit PC MODE Video OSD Language English OSD Language :Select from English / Time Setup Español / Français. Audio Restore setting Setup Parental Setup Select EXIT Exit Time Setup Setting: Video Time Zone EasternTime Video Time Update Off Time Date 2000/01/01
Résumé du contenu de la page N° 20
TV SETUP Caption Setting: Video Analog Closed Caption Off Video Caption Style As Broadcaster Digital Closed Caption Off Font Size Small Audio Audio Font Style Style 1 Digital Caption Style Font Color Green TV TV Font Opacity Solid Setup Setup Background Color Black Background Opacity Translucent Parental Parental Window Color White Window Opacity Transparent Caption Select EXIT Return Digital Caption Style Select EXIT Return Analog Closed Caption : Select the analog closed caption or turn it o
