Résumé du contenu de la page N° 1
R
LCD COLOR TV
USER'S MANUAL
TL3220
Part No: IES041201
Résumé du contenu de la page N° 2
WELCOME TO THE Wonderful World Dear customer, Thank you for choosing this LCD color TV. We expect our product and service will comfort you for long. This manual is to guide you to set up and operate your TV as quickly as possible. Please read all the safety and operation instructions carefully before you begin and follow that the handbook tells, which we recommend, though we also pro- vide Brief Operating Instructions. SAFETY CLASS This is an IEC safety class I product and must be grounded
Résumé du contenu de la page N° 3
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the CAUTION presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock. CAUTION: TO REDUCE THE RISK OF ELEC- TRIC SHOCK, DO NOT REMOVE COVER(OR BACK).NO USER- The exclamation point within an equilateral trian
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INSTRUCTION 8. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDE AMPLIFIERS) THAT PRODUCE HEAT. 9. DO NOT DEFEAT THE SAFETY PURPOSE OF THE POLARIZED OR GROUNDING-TYPE PLUG. A POLARIZED PLUG HAS TWO BLADES WITH ONE WIDER THAN THE OTHER. A GROUNDING TYPE PLUG HAS TWO BLADES AND A THIRD GROUNDING PRONG. THE WIDE BLADE OR THE THIRD PRONG ARE PROVIDED FOR YOUR SAFETY. IF THE PROVIDED PLUG DOES NO
Résumé du contenu de la page N° 5
L R AUDIO Brief Operating Instructions 1.Connection Connect the antenna lead or CATV cable or external equipments(such as Antenna, Cable TV ,VCD,DVD, VTR,Set top box,etc.)to the corresponding terminals or interface on the TV rear(please refer to the owner s manual of the equipment to be connected as well)and confirm that the signal source is available and works normally. ANT 75 COMPONENT R L R L VIDEO PC AUDIO S-VIDEO VIDEO INPUT INPUT OUTPUT AUDIO-OUT INPUT AUDIO-IN 2.The remote control
Résumé du contenu de la page N° 6
Brief Operating Instructions 3.Switching on/off 1)Connect the TV to power outlet, the power indicator will be red and then turn blue. Several seconds later, TV picture will display on the screen. 2)Press stand by button on the machine or the [Power] button on the remote control to turn off the TV. 4.Signal source selection Press the number [1-9] button or [ or ] button to select TV input; press the [VIDEO] button to select VIDEO input; press the [S-VIDEO] button to select S-VIDEO input;
Résumé du contenu de la page N° 7
Preparation for Using your new TV Selecting a location for the TV 1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen. 2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause overheating, which may damage the TV. NOTE: Please contact local dealer for wall mounting. Learning about your TV You can operate your TV by using the buttons on the front panel or the remote control. The terminals
Résumé du contenu de la page N° 8
L R AUDIO Preparation for Using your new TV Remote sensing window 0 PC VGA input Power button (standby) Power indicator 11 (ON/OFF) Power Switch CATV antenna input Headphone output AC Power Socket Y/PbPr/YCbCr input Menu button S-Video input Audio input Source select AV input Volume down / cursor left AV output PC audio input Volume up / cursor right Channel down / cursor down RS232C DEBUG input DVI input Channel up / cursor up Connecting your TV Caution: Do not plug the TV in until you ha
Résumé du contenu de la page N° 9
Preparation for Using your new TV Connecting to a Computer You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB interface and PC audio interface. Connect the devices as shown below. PC/NB To VGA L R L R S-VIDEO VIDEO VIDEO PC AUDIO OUTPUT INPUT INPUT INPUT AUDIO-IN AUDIO-OUT To speaker RGB line Audio line Connecting to an antenna To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna
Résumé du contenu de la page N° 10
L R AUDIO Preparation for Using your new TV Connecting to a cable converter box This television has an extended tuning range and can tune most cable channels without using a cable company supplied converter box. Some cable companies offer premium pay channels in which signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. For subscribers to Basic Cable TV Service For basic cable service not
Résumé du contenu de la page N° 11
Using the remote control Preparing the remote control for use Installing the remote control batteries 1. Open the battery cover on the back of the remote control. 2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment. 3. Close the battery cover. Note: 1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire. 2.Do not mix battery types or combine used batteries with new ones. 3.Remove de
Résumé du contenu de la page N° 12
Using the remote control Learning about the remote control : Power on/off : Select sound mode : Adjust aspect ratio : : Mono/stereo/SAP selection Vchip operation : Closed Caption operation : Select picture mode : Main source selection : Channel up : Volume down : Volume up : Channel down : Call up the main menu : Mute the sound : Set the sleep timer Channel Number :Direct channel selection : Return to previous channel : Display current input : Switch to S-VIDEO mode : Switch to VGA mode : Switc
Résumé du contenu de la page N° 13
Using the TV features Understanding the TV features Multimedia - TV receiver, Video monitor and PC display, all in one. Wider viewing angle, 16:9 display - over 150 viewing angle, 16:9 ergonomical display panel Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective of magnetic or geomagnetic effect. 181 channels selection Closed caption decoder - You may view specially labelled (cc) TV programs, movies, news,
Résumé du contenu de la page N° 14
Using the TV features Select channels by numbers To select a channel : Press the channel numbers in series to select channel directly. For example, to seclect channel 120, Press the button 1, and 1-- will display on the top right corner of the screen, then press the button 2, 12- will display, press the button zero, you can enjoy the program of channel 120. Adjust Volume When menu is not displayed on the screen, press [ or ]to adjust the volume. Use PIP button Press the PIP butt
Résumé du contenu de la page N° 15
Using the TV features Using the PRESET menu POSITION PRESET 1) Press the [MENU] button to enter the main menu. 2) Press the [ or ] button to select the item PRESET.. 3) Press the [ or ] button to select POSITION. POSITION 4) Press the [ or ] button to select the present channel. SKIP RF INPUT AUTO_SEARCH SKIP 1) Press the MENU button to enter the main menu. 2) Press the [ or ] button to select the item PRESET. 3) Press the [
Résumé du contenu de la page N° 16
Using the TV features Using the AUDIO SETTINGS menu Adjust audio settings AUDIO SETTINGs 1) Press the MENU button to enter the main menu. 2) Press the [ or ] button to select the item audio settings. BASS 3) Press the [ or ] button to select the item you want to adjust. TREBLE 4) Press the [ or ] button to adjust the level. BALANCE 5) The adjusted data is stored automatically in the user mode. MTS BTSC / SAP You can enjoy watching TV while you liste
Résumé du contenu de la page N° 17
Using the TV features FUNCTION SETTINGs DISPLAY 1) Press the MENU button to enter the main menu.Press ADVANCE LANGUAGE ENGLISH the [ or ] button to select the FUNCTION SETTINGS. 2) Press the [ or ] button to select the item CCD CCD CONTROL CLOCK CCD CONTROL CONTROL,and press the [ ] to enter CCD CONTROL menu. COLOR SYSTEM MODE OSD LANGUAGE 3) Press the [ or ] button to select the DISPLAY. DISPLAY VCHIP BLANK 4) Press the [ ] button
Résumé du contenu de la page N° 18
Using the TV features Using the PC PARAMETERS menu PC PARAMETERS AUTO 1) Press the MENU button to enter the main menu. ADVANCE 2) Press the [ or ] button to select the pc parameters. 3) Press the [ or ] button to select the item AUTO, AUTO and press the [ ] to adjust the picture position. CLOCK PHASE POSITION AUTO COLOR CLOCK 1) Press the MENU button to enter the main menu. ADVANCE 2) Press the [ or ] button to select the pc parameters. 3)
Résumé du contenu de la page N° 19
Using the TV features Using the VCHIP SETUP menu VCHIP SETUP VCHIP SETUP VCHIP enables parents to prevent their children from PASSWORD ENTER viewing certain programs or channels. PASSWORD CHANGE 1) Press the MENU button to enter the main menu. 2) Press the [ or ] button to select the item VCHIP MPAA RATING SETUP. TV PG RATING PASSWORD ENTER Password is a four-digit number. The preset password is 1111. Enter the Vchip Password You must enter password to access the next two ope
Résumé du contenu de la page N° 20
Using the TV features Rating Defined as About MPAA Ratings NA Rating not applicable CLOCK The Motion Picture Association of America(MPAA) G General audience uses a rating system to qualify motion picture content.Television broadcasters employ a rating PG Parental Guidance suggested system to qualify the content of televison programs PG-13 Parents strongly cautioned as well.The MPAA and TV ratings work with the V-CHIP feature and allow you to block out R Restricted programming above the rat
