Résumé du contenu de la page N° 1
LCD TELEVISION
INSTRUCTION MANUAL
GB
DLT-26C2
DLT-26C3
DLT-32C2
DLT-32C3
DLT-32C5
DLT-32C6
DLT-32C7
DLT-37C3
DLT-37C7
Helpline Number: 0870 100 2525
Résumé du contenu de la page N° 2
Caution CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. T he lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s en- closure that may be of sufficient magnitude to constitute a risk electric shock. T he exclamation point wit
Résumé du contenu de la page N° 3
Important Safeguards Please read the following safeguards for your TV and retain for future reference. Always follow all warnings and instructions marked on the television. 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain them safely for future reference. Follow all operations and instructions accordingly. 2. Heed Warnings Adhere to all warnings on the appliance and in the operating instructions. 3. Cleaning Unplug the TV fr
Résumé du contenu de la page N° 4
Important Safeguards 12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 13. Overloading Do not overload wall outlets and extension cords as this can result in a risk of fire or electric
Résumé du contenu de la page N° 5
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and im- proper operation of the product may result in the person’s death WARNING or serious injury. In case of an accident, please unplug the unit from the outlet immediately. To reduce the risk of electric shock, do not remove
Résumé du contenu de la page N° 6
Warning This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user’s own safety, and the proper operation of the product. Ignoring or disregarding the contents of this section and im- proper operation of the product may result in the person’s death CAUTION or serious injury. Please keep the user’s manual in a safe place for future reference. Do not put volatile substance-such as benzene, Do not spill
Résumé du contenu de la page N° 7
Table of Contents Installation and Maintenance Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Camcorder & Video Game Connection. . . . . . . . . . . . . . . . . . . . 13 DVD Player Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 STB (S
Résumé du contenu de la page N° 8
Supplied Accessories Make sure that the following accessories are provided with the product. AC cord Instruction manual Cover Bottom - When you install wall mounting you set up cover bottom like upper picture. Remote controller Batteries Cable holder (Except C2 Series) The method of wire arrangement 1. Assemble the cable holder enclosed on the back of TV. (PICTURE1) (ASSEMBLY METHOD: After you push the „A”(prominence part of cable holder) in the hole, rotate the cable holder clockwise as
Résumé du contenu de la page N° 9
Antenna Connection Indoor Antenna Connection 1. Connect the feeder cable of the antenna to the combining adapter. WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong antenna con- nection. Be sure to check its direction and place when installing. combining adapter 2. Connect the combining adapter to the antenna input at the left side of the TV set. WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest Service Cen- tre
Résumé du contenu de la page N° 10
Antenna Connection CTV Antenna Connection Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. Antenna socket on the wall Antenna socket at the left side of the TV set ANT/CABLE When a feeder cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right. Antenna socket on the wall Antenna socket at the le
Résumé du contenu de la page N° 11
Antenna Connection Outdoor Antenna Connection Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses. Single Antenna Connection VHF Antenna Back of the tv set UHF Antenna HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT ANT/CABLE Separate Antenna Connection. VHF Antenna In case of coaxial cable In case of feeder cable ANT/CABLE UHF Antenna ANTENA combining Adapter (Separate purchase) 11
Résumé du contenu de la page N° 12
Video Connection Connecting with an External Source You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with the AV3 input. S-Video HDMI INPUT AV1 AV2 O PC INPUT PC AUDIO S-VHS AV3 L - AUDIO - R Note : If S-video and RCA jack are connected the same time, The TV set will only detect the S-Video mode. • If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is rec- ommended for better picture quality.
Résumé du contenu de la page N° 13
Camcorder & Video Game Connection Watching the Camcorder Recording on TV 1. Prepare the S-video and RCA connector. 2. These connectors connect to S-video or AV 3 as shown in the picture below. 3. Turn on the TV set and camcorder/video game. 4. Select AV3/S-video mode, using the ”AV”button of the Remote controller or “ ” button of the TV set. HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL Camcorder AV3 L - AUDIO - R COMPONENT Back of the tv set Video game Note : If S-video and RC
Résumé du contenu de la page N° 14
DVD Player connection When connecting with a component cable and Euro SCART cable HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT Back of the tv set DVD Note : • When you connect with the component video, please check the colour of the cable between the DVD and TV set. When connecting with a S-VHS cable and RCA cable HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT Back of the tv set DVD Note : If S-video
Résumé du contenu de la page N° 15
STB(Set Top Box) Connection When connecting with a HDMI cable HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT Back of the tv set Set Top Box When connecting with a component cable HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT Back of the tv set Set Top Box 15
Résumé du contenu de la page N° 16
PC Connection When connecting with PC(D-Sub) cable. 1. First adjust resolution of the PC. (Refer to table in page 17.) 2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below. 3. Turn on the PC and TV set. 4. Select PC mode by pressing the “MULTIMEDIA” button on the remote control or ” ” button of the TV set. Back of the tv set HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT PC When connecting with a HDMI cable. 1
Résumé du contenu de la page N° 17
PC Connection PC CONNECTION NOTES: 1) The resolution of the TV set is best at 1360(6) x 768(WXGA). 2) If there is a [Vertial Frequency] setting menu in the [Display] Menu of the PC, adjust the frequency to 60Hz. 3) If the PC resolution is too high, it may be hard to detect signals. Select a suitable resolution. 4) HDMI input port receives only digital Signal. 5) Depending on the graphic card when you plug & unplug the HDMI connection the screen may not dis- play correctly. Restart the compute
Résumé du contenu de la page N° 18
Cable TV Broadcasting Connection External Input Connection Source Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to either the Component input or SCART input AV1 or AV2. Input Cable TV Broadcasting Station CATV Receiver Back of the tv set HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT Antenna Input Connection Watching cable television
Résumé du contenu de la page N° 19
Connect with the Dolby Digital AMP. If you connect the optical output to a Dolby digital AMP, you can listen to better sound. Back of the tv set HDMI INPUT AV1 AV2 OPTICAL PC INPUT PC AUDIO Pr Pb Y S-VHS RL AV3 L - AUDIO - R COMPONENT Optical output I N P U T Dolby Digital AMP L Woofer Centre R Surround L Surround R 19
Résumé du contenu de la page N° 20
Name of Each Part Front / Side Panel Buttons on the TV set have the same functions as those of the remote controller. Control Key Buttons. TV/VIDEO Button : Each time you press this button, the TV will cycle through: TV / AV1 / AV2 / AV3(S-Video) / PC/HDMI / COMPONENT. MENU Button : Use this button to enter and exit the MENU. VOL Buttons : Use these buttons to change your TV’s volume or to move the cursor in the menu. PR Buttons : Use these buttons to change channels on your TV or to mov
