Résumé du contenu de la page N° 1
Canon New F-1
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Film Advance Lever Film Speed Range The film advance lever has a 30° stand-off One of the widest ranges of any 35mm angle for readiness in action SLR, the ASA 6-6400 film speed photography. Contoured to fit the thumb provides plenty of latitude for for comfortable and efficient operation, push-processing films. the lever allows single or multiple stroke The ASA is clearly displayed in the film advance. window for easy reference. Battery Check Button Safety Stopper Press this button to
Résumé du contenu de la page N° 4
Canon Breech-lock Mount Exposure Compensation The breech-lock mount is an exclusive feature which Exposure compensation up to +2EV is assures total interchangeability of all Canon lenses and possible for special creative effects. accessories. Lens change is effected in one swift motion. Calibrated in 1/3 EV increments, the dial is released by pressing the lock button. Stop-down Slide Exposure Compensation A convenient feature which allows you Exposure compensation up to +2EV is to possi
Résumé du contenu de la page N° 5
Eyepiece: Shutter Button/Self-timer Shutter The eyepiece shutter shuts out all The multifunctional shutter button extraneous light. A useful safeguard provides a meter reading when depressed when taking long exposures or with gently and releases the shutter when fully self-timed depressed. To activate the selftimer, turn or remote-control photography. the outer ring to "S" and press the shutter. A beeping sound will issue for 10 sees. before the shutter releases itself. Set the ring to "A
Résumé du contenu de la page N° 6
Film Rewind/Multiple Contoured Action Grip Exposure Lever The specially shaped battery compartment cover provides a firm action Traditionally located on the base, Canon grip for steadier shooting. Press the has relocated the film rewind lever on top release button underneath to remove the for easier access when using a tripod or cover and gain access to other accessories. For film rewind, turn the battery. the lever clockwise and depress. Do the same thing before cocking the shutter t
Résumé du contenu de la page N° 7
CONTENTS CONTENTS Contents 1 Attaching the Lens 4 2 Battery 6 2.1 Loading the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.2 Checking the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 Shutter Release and Self-timer/Lock Lever 9 4 Holding the Camera 11 5 Focusing 12 6 Loading the Film 14 7 Setting the ASA/ISO Film Speed 15 8 Frame Counter 16 9 Exposure 18 10 Shutter 19 11 How to Choose a Shutter Speed 21 11.1 Freezing Motion . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 8
CONTENTS CONTENTS 18 Aperture-priority AE 33 18.1 Stopped-down AE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 18.2 Match-needle Metering . . . . . . . . . . . . . . . . . . . . . . . . . 36 18.3 Stopped-down (Fixed-index) Metering . . . . . . . . . . . . . . . . 36 19 Shutter-priority AE 38 20 Meter Coupling Range 41 21 Metering Sensitivity Areas 42 22 Exposure Compensation 45 23 Rewinding the Film 50 24 Depth of Field 52 25 Self-timer 54 26 Multiple Exposures 57 27 Exposure in Mu
Résumé du contenu de la page N° 9
1 ATTACHING THE LENS 1 Attaching the Lens To remove the body cap, turn it counterclockwise until it stops and pull it off. To reattach, align the red dot on the cap with the camera’s red dot. Then lightly push the cap in and turn it fully clockwise. Turn the rear lens cap in the direction of the arrow until it stops and pull it off. To reattach, align the arrow on the cap with the lens’ red dot. Then lightly push the cap in and turn it fully clockwise. To mount the lens, align its red positioning
Résumé du contenu de la page N° 10
1 ATTACHING THE LENS The following lenses cannot be mounted on the New Canon F-1: FL 19mm f/3.5 R 100mm f/3.5 FL 58mm f/1.2 R 100mm f/2 R 50mm f/1.8 FLP 38mm f/2.8 R 58mm f/1.2 Notes: • Do not push the stop-down slide while advancing the film. Otherwise, it may be impossible to mount the lens. • Do not press the lens release button while mounting the lens or it may not pop out, thus causing the lens to work incorrectly. 5
Résumé du contenu de la page N° 11
2 BATTERY 2 Battery 2.1 Loading the Battery The action grip of the camera also serves as a battery chamber cover and therefore must be removed to load a battery. To do this, press the release button and lift up the grip. Use one of the batteries listed below or an equivalent of another brand: Lithium 6V Duracell PX 28L Alkaline - manganese 6V Eveready (UCAR) No. A544 IEC 4LR44 Silver Oxide 6V Eveready (UCAR) No. 544, Durqceli PX 28, IEC 4SR44 To ensure proper contact, wipe the battery terminals
Résumé du contenu de la page N° 12
2 BATTERY 2.2 Checking the Battery 2.2 Checking the Battery Thebatterycanbecheckedwiththeshutterdialatanysettingotherthan”A”, and at any ASA/ISO film speed setting. With the shutter dial on ”B,” battery check is possibleonlyafterthefilmhasbeenadvanced. Tocheckthebattery,pressthecheck button for about three seconds while looking in the viewfinder. Battery power is sufficient when the meter needle is above the battery check index. The weaker the battery, the lower the needle. However, even if the batte
Résumé du contenu de la page N° 13
2.2 Checking the Battery 2 BATTERY Try to make a habit of checking the battery at the followingtimes: • After loading a new battery. • If the shutter won’t function with the selftimer/lock lever on ”A.” • Before and after making many long exposures at slow speeds other than ”B.” • When you are using the camera at low temperatures. • Before shooting important events. • When the camera is used frequently. • After storing the camera for a long time. • Before going on a trip. The battery check butto
Résumé du contenu de la page N° 14
3 SHUTTER RELEASE AND SELF-TIMER/LOCK LEVER 3 Shutter Release and Self-timer/Lock Lever The self-timer/lock lever of the camera has three settings. With the lever at ”A,” press the shutter button halfway to activate the meter. To release the shutter, gen- tly press the shutter button all the way down. When the level is at ”L,” the shutter button is locked. It is advisable to turn the lock lever to ”L” when the camera is not in use to prevent accidental shutter release and battery consumption. Wi
Résumé du contenu de la page N° 15
3 SHUTTER RELEASE AND SELF-TIMER/LOCK LEVER mirror for the next shutter release. The film must be advanced fully to the next frame or the shutter will not release. 10
Résumé du contenu de la page N° 16
4 HOLDING THE CAMERA 4 Holding the Camera The best way to prevent image blur from camera movement is to hold the camera as steady as possible, with your left hand supporting the camera and lens. Lightly rest your right index finger on the shutter button, and the tip of your thumb on the film advance lever or on the body. Wrap your other right fingers around the action grip. Then press your left elbow to your body and lightly press the camera against your cheek or forehead. For a vertical shot, stea
Résumé du contenu de la page N° 17
5 FOCUSING 5 Focusing 1. Laser-matte screen 2. Microprism rangefinder 3. New split rangefinder 4. Overexposure warning mark 5. Meter Needle 6. Stopped-down metering/battery check index 7. Aperture needle 8. Underexposure warning mark twhen using f/1.4 lens) 9. Shutter speed display out of focus in focus 12
Résumé du contenu de la page N° 18
5 FOCUSING Turn the focusing ring of the lens as you look in the viewfinder until the main sub- ject is sharp. The three focusing aids of the standard screen can be used alone or in combination according to the subject and your own preference. Note: The New Canon F- 1’s focusing screen, which makes precise focusing possible, also determinesthemeteringsensitivityarea. Thereare13typesoffocusingscreensand three different metering areas optionally available to suit your particular focusing and meterin
Résumé du contenu de la page N° 19
6 LOADING THE FILM 6 Loading the Film Pressing the safety stopper, pull up the rewind knob until the camera back pops open. Be sure to shield the film from direct sunlight while loading. Place the car- tridge in the film chamber as shown. Then push down the rewind knob, turning it until it drops into its normal position. Note: Remove the plastic insert from the pressure plate before loading the first film car- tridge. Pull the film leader across the camera and insert the tip into any slot of the take
Résumé du contenu de la page N° 20
7 SETTING THE ASA/ISO FILM SPEED 7 Setting the ASA/ISO Film Speed Turn the setting dial, while pressing the lock release button, until the desired film speed aligns with the index. The dial cannot be turned lower than ASA6 or higher than ASA6400. The table on the next page shows the ASA/ISO film speeds which can be set on the New Canon F-1. Figures in parentheses are intermediate speeds which are indicated by dots on the ASA/ISO dial. ASA/ISOisanumericalratingofthefilm’ssensitivitytolight. Thehighe
