Instruction d'utilisation Canon MX360

Résumé du contenu de la page N° 1

Dedicated Fax Line
Setup Guide
MX360 or MX410
Next

Résumé du contenu de la page N° 2

Connecting The Phone Lines Previous Next

Résumé du contenu de la page N° 3

Connecting The Phone Lines Before Wall jack After Wall jack (Phone Cord included with Canon printer) Next Previous 3

Résumé du contenu de la page N° 4

If Your Wall Plate Has Two Jacks Use the jack that supports the fax line. Previous Next 4

Résumé du contenu de la page N° 5

If Your Wall Plate Has One Jack For Two Lines If your wall jack provides one jack for two phone lines, it would be best to use a “2 Line 3 Way Adapter.” This adapter can be purchased at most stores that sell electronics. This device creates three plugs where there was one. One jack will be for your voice line. The other jack can be used for your fax transactions. In most cases, line 1 (L1) is used for phone calls; L2 is used of faxing. The third jack (L1+L2) allows access to both lines. Thi

Résumé du contenu de la page N° 6

Fax to Phone Line Connection First, connect one end of the supplied telephone cord to the telephone jack on the wall. Wall Jack (Phone Cord included with Canon printer) Previous Next 6

Résumé du contenu de la page N° 7

Fax to Phone Line Connection Next, connect the other end of the supplied telephone cord to the lower jack (labeled “L”) on the MX360 or MX410. Wall Jack (Phone Cord included with Canon printer) Previous Next 7

Résumé du contenu de la page N° 8

Setting Up The Receive Mode Previous Next

Résumé du contenu de la page N° 9

Step 1 Step 2 Turn on the MX360 or MX410 by Press the FAX button. pressing the ON button. MX360 MX410 Previous Next 9

Résumé du contenu de la page N° 10

Step 3 Step 4 Press the Menu button Use the Left or Right Arrow button to select “Receive mode set”. Previous Next 10

Résumé du contenu de la page N° 11

Step 5 Step 6 Press the OK button The “Receive mode set” screen will appear Previous Next 11

Résumé du contenu de la page N° 12

Step 7 Step 8 Use the Left or Right arrow button Ensure that “Fax only mode” is to select “Fax only mode” displayed Previous Next 12

Résumé du contenu de la page N° 13

Step 9 Step 10 Press the OK button The “Make advanced settings?” screen will appear Previous Next 13

Résumé du contenu de la page N° 14

Step 11 Step 12 Press the FAX button Your MX360 or MX410 is now set to FAX only mode. Notice that the mode is listed on the fax standby screen. Previous Next 14

Résumé du contenu de la page N° 15

To Receive A Fax When a call comes in on the fax line, the MX360 or MX410 will answer the call and begin receiving the fax. You do not have to be home or interact with the MX360 or MX410 to receive a fax. Previous 15