Résumé du contenu de la page N° 1
E
DATA PROJECTOR
*
XJ-H1600/XJ-H1650
* *
XJ-ST145 /XJ-ST155
* USB Port Models
User’s Guide
Be sure to read the precautions in the separate Setup Guide. For
details about setting up the projector, see the Setup Guide.
Be sure to keep all user documentation handy for future
reference.
Résumé du contenu de la page N° 2
DLP is a registered trademark of Texas Instruments of the United States. Microsoft, Windows, and Windows Vista are registered trademarks or trademarks of Microsoft Corporation in the United States and other countries. HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC. XGA is a registered trademark of IBM Corporation of the United States. PJLink is a trademark applied for registration or is already registered in Japa
Résumé du contenu de la page N° 3
Contents About this manual... ...............................................................................5 Projector Overview ......................................................... 6 Projector Features and Main Functions .................................................6 Remote Controller and Projector Keys...................................................8 Back Terminals.......................................................................................9 Operation During Projection .
Résumé du contenu de la page N° 4
Configuring Advanced Projector Settings.................. 21 Basic Setup Menu Operations .............................................................21 Displaying the Setup Menu........................................................................................ 21 Configuring Setup Menu Settings.............................................................................. 21 Basic Setup Menu Example....................................................................................... 22 Di
Résumé du contenu de la page N° 5
Appendix ........................................................................ 44 Connecting to a Video Device..............................................................44 Connection to a composite video output or S-video output ..................................... 44 Connection to a component video output................................................................. 45 Connecting the HDMI Output of a Video Device or Computer to the Projector...........................................
Résumé du contenu de la page N° 6
Projector Overview This section describes the features of the projector, and explains the functions of the projector and remote controller keys. Projector Features and Main Functions XJ-H1600/XJ-H1650/XJ-ST145/XJ-ST155 Mercury-free Hybrid Light Source: A CASIO-original laser and LED hybrid light source delivers high luminance from 2500 to 3500 lumens. This projector does not use a mercury lamp, making it environmentally friendly. A wide selection of input sources: Analog RGB, composite video
Résumé du contenu de la page N° 7
XJ-H1650/XJ-ST145/XJ-ST155 Projection of Data from USB Memory or a Memory Card without a Computer: USB memory or a memory card (using a commercially available USB card reader) can be connected directly to the projector’s USB-A port. The projector comes with special software for converting PowerPoint presentation data to a format that can be stored to USB memory or a memory card and projected without using a computer. Images and movies also can be projected directly from USB memory or a memo
Résumé du contenu de la page N° 8
Remote Controller and Projector Keys Operations in this manual are presented based on the remote controller that comes with the projector. Major operation keys are also provided on the projector unit, so the most of the same procedures can also be performed directly on the projector. Remote Controller Keys Remote control signal emitter [INPUT] key CLASS 1 LED PRODUCT [MENU] key [P] (Power) key [ESC] key [FUNC] key Cursor keys ( / / / ) [AUTO] key [ENTER] key ([STYLE] key) [BLANK] key [FREE
Résumé du contenu de la page N° 9
Back Terminals 123 4 5 6 7 8 9bkblbmbnbo bp bq br 1 USB-A port (XJ-H1650/XJ-ST145/XJ-ST155 only) 2 LAN port (XJ-H1650/XJ-ST145/XJ-ST155 only) 3 HDMI port 4 MONITOR OUT terminal 5 COMPUTER IN 1 terminal 6 COMPUTER IN 2 terminal 7 Remote control signal receiver 8 Power connector 1 9 SERIAL port* bk AUDIO OUT terminal bl Anti-theft lock hole bm AUDIO IN 1 terminal bn AUDIO IN 2 terminal bo AUDIO IN L/R terminals bp VIDEO terminal bq S-VIDEO terminal 2 br USB-B port* (XJ-H1650/XJ-ST145/XJ-ST155 only
Résumé du contenu de la page N° 10
Operation During Projection Selecting the Input Source Turning on the projector initially causes the same input source that was selected the last time it was turned off to be selected. To select a different input source 1. Press the [INPUT] key. This displays the input source selection screen. 2. Select either the Normal Input Mode or 3D Input Mode depending on the type of image you want to project. For details about the 3D Input Mode, see the explanation in the following section. 3. Use the
Résumé du contenu de la page N° 11
3D Input Mode Your projector supports projection of 3D images. To project a 3D image, first enter the projector’s 3D input mode, and then select the input source. Important! Separately available 3D glasses (YA-G30) are required in order to view a projected 3D image in 3D. Separately available special software (CASIO 3D Converter) is required to project a 3D image with the projector when a computer (analog RGB) is the input source. The input sources described below can be selected for projec
Résumé du contenu de la page N° 12
Returning to the Normal Input Mode from the 3D Input Mode 1. Press the [INPUT] key to display the input source selection screen. 2. Use the [ ] and [ ] keys to move the highlighting to “To normal input mode” and then press the [ENTER] key. This enters the normal input mode and closes the input source selection screen. Horizontal Flipping in the 3D Input Mode In side-by-side 3D, a full frame consists of two halves on the left and right for each eye. In rare cases, the left and right images m
Résumé du contenu de la page N° 13
Image Operations During Projection You can perform the following operations while projecting an image. Image brightness adjustment Color mode selection Image zooming Momentary cut off of the input source image and projection of a black or blue screen, or a logo Image freeze Pointer display in the projected image Aspect ratio switching Adjusting Image Brightness Note (for USB port model users) Use the setup menu (page 21) to adjust image brightness when the input source is an external dev
Résumé du contenu de la page N° 14
Selecting the Color Mode You can select from among various different color mode settings in accordance with image contents and projection conditions. Important! The color mode cannot be selected in the following cases. When “Off” is selected for the Eco Mode setting (page 19) When the projector is in the 3D input mode. See “3D Input Mode” (page 11). The color mode cannot be selected while “On” is selected for the setup menu “Option Settings 2 Interactive Pointer” setting. Though the color
Résumé du contenu de la page N° 15
Momentarily Cutting Off the Input Source Image 1. Press the [BLANK] key. This temporarily cuts off the image from the input source and projects a black screen in its place. 2. To resume projection of the image from the input source, press the [BLANK] key (or [ESC] key). Note You can specify projection of a black screen or blue screen, or a logo. For details, see “Blank Screen” under “Screen Settings Main Menu” on page 33. Freezing an Image Pressing the [FREEZE] key freezes the projected imag
Résumé du contenu de la page N° 16
Displaying a Pointer in the Projected Image You can select from among different pointer styles, including various arrow styles, for display in the projected image. Pointers can be used during a presentation to indicate or highlight a specific part of the image. Note Depending on the pointer style you are using, the pointer may not display properly when you are using keystone correction. If this happens, use the [KEYSTONE +] and [KEYSTONE –] keys to change the keystone correction value to zer
Résumé du contenu de la page N° 17
Changing the aspect ratio of the projected image Press the [ASPECT] key to cycle through the aspect ratio settings for the projected image. Available settings are as shown below. For details about the meaning of each setting, see the “Aspect Ratio” setting under “Screen Settings Main Menu” on page 32. Input Source Pressing [ASPECT] will toggle between these settings: Video, S-video, Component, HDMI (DTV) Normal 16:9 RGB, HDMI (PC) Normal Full Note When the input source is a component or an H
Résumé du contenu de la page N° 18
Adjusting the Volume Level You can use the remote controller keys to adjust the volume level of the audio that is output from the projector’s speaker. To adjust the volume level 1. Press the [VOLUME] key. This causes the [Volume] screen to appear on the projected image. 2. Press the [ ] key to increase the volume, or the [ ] key to lower the volume. 3. After the setting is the way you want, press the [ESC] key. This causes the [Volume] screen to disappear. Note You also can use the setup me
Résumé du contenu de la page N° 19
Eco Mode (Power Saving, Low Noise) The following three Eco Mode settings are available to specify whether priority should be given to low-power, low-noise operation or to projection brightness. On (Auto) : A brightness sensor on the top of the projector senses surrounding light, and automatically adjusts projection brightness and color accordingly. Brightness is reduced for darker surroundings, which saves power and reduces operation noise. On (Manual): Enables manual adjustment to balance th
Résumé du contenu de la page N° 20
Important! The Eco Mode setting automatically changes to “Off” whenever the projector is in the 3D input mode (“3D Input Mode”, page 11) or “On” is selected for the “Option Settings 2 Interactive Pointer” setting. The “On (Auto)” setting cannot be selected for the Eco Mode while “On” is selected for “Screen Settings Ceiling Mount” on the setup menu. If the “Ceiling Mount” setting is changed to “On” while “On (Auto)” is selected for the Eco Mode setting, the Eco Mode setting will autom
