Instruction d'utilisation Metra Electronics 99-5808

Résumé du contenu de la page N° 1

INSTALLATION INSTRUCTIONS FOR PART 99-5808
APPLICATIONS
2004-2007 Ford Freestar
2004-2007 Mercury Monterey
2005-2007 Ford Focus
2005-2007 F Series Super Duty
99-5808
KIT FEATURES
• DIN Head Unit Provisions with Pocket
• ISO DIN Head Unit Provisions with Pocket
KIT COMPONENTS
A) Radio Housing • B) ISO Brackets • C) Trim Plate
C
B
WIRING AND ANTENNA CONNECTIONS
A
(Sold Separately)
• Wiring Harness:
• 70-5520 - Ford harness 2003-up
• 70-5521 - Ford amplified harness 2003-up

Résumé du contenu de la page N° 2

99-5808 Dash Disassembly - Ford Freestar 2004-2007 ............................................................. 1 - Mercury Monterey 2004-2007 ..................................................... 1 - Ford Focus 2005 -2007 .............................................................. 1 - F Series Super Duty 2005-2007 ...................................................2 DIN Head Unit Provision ................................................................. 3 ISO DIN Head Unit Provision .....

Résumé du contenu de la page N° 3

DASH DISASSEMBLY 99-5808 FORD FREESTAR 2004-2007 MERCURY MONTEREY 2004-2007 A Disconnect the negative battery terminal 1 to prevent an accidental short circuit. Unsnap and remove entire panel surrounding 2 radio and climate controls. (FIGURE A) 3 Remove (4) 7mm screws to remove B factory radio. (FIGURE B) FORD FOCUS 2005-2007 1 Disconnect the negative battery terminal to A prevent accidental short circuit. 2 Unsnap and remove entire panel surrounding the radio and climate controls. (FIGURE A) R

Résumé du contenu de la page N° 4

99-5808 F SERIES SUPER DUTY 2005-2007 1 Disconnect the negative battery terminal A to prevent an accidental short circuit. 2 Unsnap and remove entire panel sur- rounding radio and climate controls. (FIGURE A) 3 Remove (4) 7mm screws to remove factory radio. 2 DASH DISASSEMBLY

Résumé du contenu de la page N° 5

KIT ASSEMBLY 99-5808 DIN HEAD UNIT PROVISIONS: 1 Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs down. (Figure A) 2 Slide the after-market head unit into the cage and secure. (Figure B) ISO DIN Head Unit Provision Mount the ISO Brackets to the head 1 unit with the screws supplied with the unit. Slide the head unit into the radio 2 opening until the side clips engage. Snap the Trim plate into the Radio 3 Housing. 3

Résumé du contenu de la page N° 6

99-5808 A A) Strip wire ends back 1/2" B B) Twist ends together C) Solder C D) Tape D Locate the factory wiring har- 1 ness in the dash. Metra recom- mends using the proper mating adapter and making the con- nections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit) Re-connect the negative battery 2 terminal and test the unit for proper operation. 3 Reassemble radio and dash assemblies in reverse order of disassembly. 4 FINAL ASSEMBLY

Résumé du contenu de la page N° 7

NOTES 99-5808 ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ____________________________________________________________ ___________________________________________________________

Résumé du contenu de la page N° 8

INST995808 1-800-221-0932 www.metraonline.com REV. 04-20-09 © COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION INST99-5808