Résumé du contenu de la page N° 1
8 CHANNEL/
16 CHANNEL DVR
User Manual SRD-852D/1652D
Résumé du contenu de la page N° 2
overview FEATURES The SRD DVR employs H.264 video encoding for 8 to 16 channel inputs and G.723 audio encoding for 4 channels, and supports hard disc recording and playback as well. These DVRs also supports network connectivity, providing remote monitoring from a remote PC transferring video and audio data. • Provides convenient User Interface • 8/16 CH Composite Input Connectors • Supports CIF(S)/2CIF(M)/4CIF(L) recording formats • Network transfer supported • De-interlacing processor for bet
Résumé du contenu de la page N° 3
OVERVIEW IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.
Résumé du contenu de la page N° 4
overview BEFORE START This user manual provides Information for using the DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, etc. You have to keep in mind the following notices : • SAMSUNG retains the copyright on this manual. • This manual cannot be copied without SAMSUNG’s prior written approval. • We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in this ma
Résumé du contenu de la page N° 5
OVERVIEW Standards Approvals This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 M of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
Résumé du contenu de la page N° 6
overview CONTENTS 2 Features OVERVIEW 3 Important Safety Instructions 4 Before Start 8 Part Names and Functions (Front) 2 10 Part Names and Functions (Rear) 12 Remote Control 14 Checking the installation environment INSTALLATION 15 Rack Installation 15 HDD Addition 14 18 Connecting the Video, Audio, and Monitor CONNECTING WITH 18 Connecting the USB OTHER DEVICE 19 Connecting POS Device 19 Connecting the Alarm Input/Output 20 Connecting the RS-485 Device 18 21 Connecting the Network 23 Getting S
Résumé du contenu de la page N° 7
OVERVIEW 68 Search SEARCH & PLAY 71 Playback 68 73 Introducing Web Viewer WEB VIEWER 74 Connecting Web Viewer 75 Using Live Viewer 81 Using Search Viewer 73 85 Viewer Setup 95 About 95 Mobile Viewer 96 SEC Backup Viewer BACKUP VIEWER 96 98 Product Specification APPENDIX 101 Product Overview 102 Default Setting 105 Troubleshooting 98 English _7
Résumé du contenu de la page N° 8
overview PART NAMES AND FUNCTIONS (FRONT) SRD-852D 1 2 3 4 ALARM HDD NETWORK BACKUP REC REC 1234 5678 ZOOM FREEZE BACKUP SEARCH 90 TELE WIDE VIEW PRESET MODE AUDIO ALARM MENU DIGTAL VIDEO RECORDER SRD-852D DVD RECORDER USB OPEN/CLOSE RETURN 10 9 8 7 6 5 SRD-1652D 1 2 3 4 ALARM HDD NETWORK BACKUP REC REC 1234 5678 ZOOM FREEZE BACKUP SEARCH 9 101112 TELE WIDE VIEW PRESET MODE AUDIO ALARM MENU 13 14 15 16 DIGTAL VIDEO RECORDER SRD-1652D DVD RECORDER USB OPEN/CLOSE RETURN 10 9 8 7 6 5 8_ overv
Résumé du contenu de la page N° 9
OVERVIEW Part Names Functions ALARM : Lights on when an event occurs. HDD : Displays the normal access to HDD. Upon access to HDD, LED repeats on and off. LED Indicator NETWORK : Displays both network connection and data transfer status. BACKUP : Displays when Backup is in progress. REC : Lights on when recording is in progress. PTZ : Sets PTZ Mode ON/OFF. ZOOM(TELE) : Sets the screen to the x2 digital zoom. Runs the TELE function in the PTZ Mode. FREEZE(WIDE) : Runs the FREEZE function i
Résumé du contenu de la page N° 10
overview PART NAMES AND FUNCTIONS (REAR) SRD-852D 1 2 3 4 5 6 7 8 9 10 SRD-1652D 1 2 3 4 5 6 7 8 9 10 10_ overview
Résumé du contenu de la page N° 11
OVERVIEW Part Names Functions AUDIO IN Audio input signal port (RCA jack). AUDIO OUT Audio Signal Output Port (RCA jack). VIDEO IN Composite Video Signal Input Port (BNC type connector). VIDEO OUT Composite Video Signal Output Port (BNC type connector). VGA VGA Video Signal Output Port. SPOT A live screen output port, separate from the VIDEO OUT. NETWORK NETWORK connector port. RS-485 Used for RS-485 communication. (TX+, TX-, RX+, RX-) - ALARM IN 1~16 (SRD-1652D) : Alarm Input port. - ALARM
Résumé du contenu de la page N° 12
overview REMOTE CONTROL DVR Available after switching to DVR mode by pressing the [DVR] button on the remote control. BACKUP SEARCH Displays the search menu. Displays the Backup Menu. OPEN/CLOSE Opens or closes the CD tray. MODE Changes the screen mode. DVR Activates the DVR function. POWER Displays the Exit pop up screen. + NUMBER [0~ 10] Used as the numeric input keys, or displays a single channel. ID Sets the ID of the system. Select 2 digits from 0 ~ 9 while pressing the ID Key. Skip Backwa
Résumé du contenu de la page N° 13
OVERVIEW MONITOR Available after switching to Monitor mode by pressing the [MONITOR] button on the remote control. AUTO ID RESET Selects the screen status automatically. Initializes the ID value to 00. P.MODE Selects the screen mode. POWER MONITOR Turns the monitor power on/off. Activates the monitor function. NUMBER [0~9] Changes the system ID. ID Sets the ID. Select 2 digits from 0 ~ 9 while pressing the ID Key. +/– MUTE Adjusts the audio volume. Mutes the audio out. MENU Displays the Setup
Résumé du contenu de la page N° 14
installation Please take note of the followings before using this product. • Do not use the product outdoor. • Do not spill water or liquid in the connection part of the product. • Do not impose the system to excessive shock or force. • Do not pull out the power plug forcefully. • Do not disassemble the product on your own. • Do not exceed the rated input/output range. • Use a certifi ed power cord only. • For the product with an input ground, use a grounded power plug. CHECKING THE INSTALLATION
Résumé du contenu de la page N° 15
INSTALLATION RACK INSTALLATION Install the Bracket-Rack as shown in the fi gure, and then fasten the screws on both sides (2 screws on each side). Fix the screws not to be loosened by vibrations. HDD ADDITION You can install additional HDDs. Make sure to unplug the power cord from the wall outlet to prevent possible electric shock, injury or product damage. Please consult your provider for further information on HDD installation since improper installation or settings may damage the produc
Résumé du contenu de la page N° 16
installation If adding HDDs The following fi gures are based on Model SRD-1652D. 1. First, loosen the screws on both sides and remove the cover. Cover 2. Disconnect the power and HDD Signal cable from the existing HDDs, then loosen the screws (x4) in Upper Bracket the left/right and upper sides and remove the upper brackets. Lower Bracket 3. Install HDDs (x3) on the upper bracket and fi x them with screws. Upper Bracket Lower Bracket 16_ installation
Résumé du contenu de la page N° 17
INSTALLATION 4. When the installation of additional HDDs is done, insert the lower and upper brackets into the DVR and fi x them with the provided screws. 5. When the installation of additional HDDs is done, connect the power cable and connect the HDD data cables (SATA Cable) to connectors ~ on the main board. Note that the number of a HDD data calbe is nothing to do with operation of the HDD. Just make arrangements of the connectors considering the length of each connector. 6. Chec
Résumé du contenu de la page N° 18
connecting with other device The following fi gures are based on Model SRD-1652D. M CONNECTING THE VIDEO, AUDIO, AND MONITOR AC 100-240V~IN AUDIO OUT VIDEO IN VIDEO IN SPOT AUDIO IN VIDEO OUT VIDEO OUT (composite) (VGA) CONNECTING THE USB 1. By factory default, a USB port is provided for external connection. 2. You can connect a USB HDD, USB CD/DVD player, USB memory or mouse to the USB port. 3. If a USB HDD is connected to the system, recognition and settings are available in “Menu > Setting t
Résumé du contenu de la page N° 19
CONNECTING WITH OTHER DEVICE CONNECTING POS DEVICE 1. You can connect a POS device to the RS-232C port on the product’s rear side when you connect it directly with a RS-232C cable. 2. Connection setup for the RS-232C port is available in “Menu > Device > POS Devices”, press the button and set . (Page 49) CONNECTING THE ALARM INPUT/OUTPUT The Alarm In/Out port at the back is composed of the following. 1. Alarm In Port for
Résumé du contenu de la page N° 20
connecting with other device • ALARM IN 1 ~ 8 (SRD-852D) : Alarm Input Port • ALARM IN 1 ~ 16 (SRD-1652D) : Alarm Input Port • ALARM RESET : On receiving an Alarm Reset signal, the system cancels the current Alarm Input and resumes sensing. • ALARM OUT 1 ~ 4 : Alarm Output Port ALARM OUT ALARM IN ALARM IN CONNECTING THE RS-485 DEVICE Connect the RS-485 device through the back port. You can connect and control the PTZ camera which supports the RS-485 communication. M • Transfer Type : You may
