Instruction d'utilisation Metra Electronics 95-9012

Résumé du contenu de la page N° 1

INSTALLATION INSTRUCTIONS FOR PART 95-9012
APPLICATIONS
•GOLF 1999-2006
•GTI 1999-2005
•JETTA 1999-2005
(Excluding NEW JETTA 2005)
•PASSAT 2000-2005
95-9012
KIT FEATURES
• Double DIN Head Unit Provision
• Stacked ISO DIN Head Unit Provision
KIT COMPONENTS
A) Radio Housing • B) (8) Phillips screws
B
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
• 70-1784 VW harness 1998-2001
• XSVI-9003-NAV VW Interface 2003-up
Antenna adapter:
• 40-EU55-adapter for amplified antenna 2002-up
• 40-VW53 adap

Résumé du contenu de la page N° 2

95-9012 TABLE OF CONTENTS Dash Disassembly - Golf 1999-2006 .... ........ ........ ....... ........ ........ ....... 1 - GTI 1999-2005 .... ........ ........ ....... ........ ........ ....... 1 - JETTA 1999-2005 (Excluding NEW JETTA 2005) . . . . . . . . . . . . . . . . . . . . . . . 1 - PASSAT 2000-2005 .... ....... ........ ........ ....... ........ ....1 Kit Assembly - Double DIN Head Unit Provision . . . ............. .............. ......2 - ISO Stacked Head Unit Provision ..... ........ ..

Résumé du contenu de la page N° 3

95-9012 DASH DISASSEMBLY •GOLF 1999-2006 •GTI 1999-2005 •JETTA 1999-2005 (Excluding NEW JETTA 2005) •PASSAT 2000-2005 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Insert the long ends of the 86-9001 into the slots on the factory radio and pull out to remove. Note: Flat edge of key should point outward. (Figure A) 3 For single DIN radios with the pocket, remove the radio and pocket, then pull out on the plastic tray separating the dash cavity. (Figure B)

Résumé du contenu de la page N° 4

95-9012 KIT ASSEMBLY/ FINAL ASSEMBLY DOUBLE DIN HEAD UNIT PROVISION/ ISO STACKED HEAD UNIT PROVISION A 1 Slide the DDIN radio unit into the DDIN bracket/radio housing assembly and secure the unit to the kit using the (8) Phillips screws supplied with the kit. (Figure A) 2 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 3 Snap kit/ radio assembly i